Detection of metallo-'beta'-lactamases-encoding genes in environmental isolates of Aeromonas hydrophila and Aeromonas jandaei

Aims: To determine the prevalence and expression of metallo-beta-lactamases (MBL)-encoding genes in Aeromonas species recovered from natural water reservoirs in southeastern Brazil. Methods and Results: Eighty-seven Aeromonas isolates belonging to Aeromonas hydrophila (n = 41) and Aer. jandaei (n = 46) species were tested for MBL production by the combined disk test using imipenem and meropenem disks as substrates and EDTA or thioglycolic acid as inhibitors. The presence of MBL genes was investigated by PCR and sequencing using new consensus primer pairs designed in this study. The cphA gene was found in 97.6% and 100% of Aer. hydrophila and Aer. jandaei isolates, respectively, whereas the acquired MBL genes bla(IMP), bla(VIM) and bla(SPM-1) were not detected. On the other hand, production of MBL activity was detectable in 87.8% and 10.9% of the cphA-positive Aer. hydrophila and Aer. jandaei isolates respectively. Conclusions: Our results indicate that cphA seems to be intrinsic in the environmental isolates of Aer. hydrophila and Aer. jandaei in southeastern Brazil, although, based on the combined disk test, not all of them are apparently able to express the enzymatic activity. Significance and Impact of the Study: These data confirm the presence of MBL-producing Aeromonas species in natural water reservoirs. Risk of water-borne diseases owing to domestic and industrial uses of freshwater should be re-examined from the increase of bacterial resistance point of view

Presence of 'BLA IND. TEM-116' gene in environmental isolates of Aeromonas hydrophila and Aeromonas jandaei from Brazil

It is known that Aeromonas spp. possess different chromosomal beta-lactamase genes. Presence and phenotypic expression of bla(TEM), bla(SHV), and bla(CTX-M) ESBL-encoding genes were investigated in environmental water isolates of Aeromonas hydrophila and Aeromonas jandaei. Presence of blaSHV and blaCTX-M genes was not observed, and blaTEM gene was verified in 91% of the isolates. Sequencing of 10 fragments showed the occurrence of bla(TEM-116)

An Environmental Friendly Procedure for Photometric Determination of Hypochlorite in Tap Water Employing a Miniaturized Multicommuted Flow Analysis Setup

A photometric procedure for the determination of ClO(-) in tap water employing a miniaturized multicommuted flow analysis setup and an LED-based photometer is described. The analytical procedure was implemented using leucocrystal violet (LCV; 4,4', 4 ''-methylidynetris (N, N-dimethylaniline), C(25)H(31)N(3)) as a chromogenic reagent. Solenoid micropumps employed for solutions propelling were assembled together with the photometer in order to compose a compact unit of small dimensions. After control variables optimization, the system was applied for the determination of ClO(-) in samples of tap water, and aiming accuracy assessment samples were also analyzed using an independent method. Applying the paired t-test between results obtained using both methods, no significant difference at the 95% confidence level was observed. Other useful features include low reagent consumption, 2.4 mu g of LCV per determination, a linear response ranging from 0.02 up to 2.0 mg L(-1) ClO(-), a relative standard deviation of 1.0% (n = 11) for samples containing 0.2 mg L(-1) ClO(-), a detection limit of 6.0 mu g L(-1) ClO(-), a sampling throughput of 84 determinations per hour, and a waste generation of 432 mu L per determination.

Methods and Participant Characteristics of a Randomized Intervention to Promote Physical Activity and Healthy Eating Among Brazilian High School Students: The Saude na Boa Project

Background: A cross-cultural, randomized study was proposed to observe the effects of a school-based intervention designed to promote physical activity and healthy eating among high school students in 2 cities from different regions in Brazil: Recife and Florianopolis. The objective of this article is to describe the methodology and subjects enrolled in the project. Methods: Ten schools from each region were matched and randomized into intervention and control conditions. A questionnaire and anthropometry were used to collect data in the first and last month of the 2006 school year. The sample (n = 2155 at baseline; 55.7% females; 49.1% in the experimental group) included students 15 to 24 years, attending nighttime classes. The intervention focused on simple environmental/organizational changes, diet and physical activity education, and personnel training. Results: The central aspects of the intervention have been implemented in all 10 intervention schools. Problems during the intervention included teachers' strikes in both sites and lack of involvement of the canteen owners in schools. Conclusions: The Saude no Boa study provides evidence that public high schools in Brazil represent an important environment for health promotion. Its design and simple measurements increase the chances of it being sustained and disseminated to similar schools in Brazil.

A gestão do conhecimento na educação ambiental

Information and knowledge are resources of environmental education (EE) that can be performed through knowledge management (KM). The aim of this paper is to propose measures of knowledge creation (KC) to improve performance of EE. This study is based on the research literature without empirical findings; therefore, the results are limited by the methodological resources of the theoretical essay. However, this limitation is the greatest motivation for future research which could investigate the proximity of EE with KM and KC in empirical investigations. Some suggestions for developing the requirements of KC programs to EE are presented as the results: possibility of the SECI process to better perform various aspects of environmental education such as social learning, interaction activities, dialogue, experience exchanging, information and knowledge, and of different ideas and ways of acting, done by EE and, finally, the possibility of Ba to develop a proper space for creation of new environmental knowledge. This article contains academic contributions to KM by providing greater discussion and understanding of KC; to EE when it allows a different view based on the work of information and knowledge about the processes of teaching, when contributing to social programs for EE, improving their practices and, consequently, contributing to an environmentally sustainable economic development.

Tool wear aspects when applying high-speed tapping on grey cast iron

Tool wear is a very important subject affecting the economics of machining, especially in tapping, since it is one of the last operations to be performed within most operation sequences. In the present study, some aspects of tapping such as the mechanisms and types of wear were investigated in taps working at conventional and high-speed cutting (HSC). Additionally, different types of coatings and cooling /lubrication conditions were used. The tapping operation (M8 x 1.25) was performed in through holes with two cutting speeds (30 and 60 m/min) in grey cast iron GG25. Lubrication conditions tested were dry and with minimal quantity of lubricant. Tap materials were manufactured by powder metallurgy and coated with (TiAl)N and with TiCN. A go-non-go gauge criterion was used to assess tool life. The wear and surface aspects of the tools and workpiece were evaluated by scanning electron microscopy and energy dissipation spectroscopy. Torque signals were also measured during the tests. The main wear mechanism observed was adhesion, although some abrasion and diffusion may also have occurred, and the main type of wear was flank wear. The adhesion of workpiece material on the tool was the main and decisive factor ending tool life. Tool coatings proved to be an efficient way to minimize adhesion. Torque signals followed the same pattern as the flank wear and no significant change was observed when the cutting speed was increased.

Environmental isolation of black yeast-like fungi involved in human infection

The present study focuses on potential agents of chromoblastomycosis and other endemic diseases in the state of Parana, Southern Brazil. Using a highly selective protocol for chaetothyrialean black yeasts and relatives, environmental samples from the living area of symptomatic patients were analysed. Additional strains were isolated from creosote-treated wood and hydrocarbon-polluted environments, as such polluted sites have been supposed to enhance black yeast prevalence. Isolates showed morphologies compatible with the traditional etiological agents of chromoblastomycosis, e.g. Fonsecaea pedrosoi and Phialophora verrucosa, and of agents of subcutaneous or systemic infections like Cladophialophora bantiana and Exophiala jeanselmei. Some agents of mild disease were indeed encountered. However, molecular analysis proved that most environmental strains differed from known etiologic agents of pronounced disease syndromes: they belonged to the same order, but mostly were undescribed species. Agents of chromoblastomycosis and systemic disease thus far are prevalent on the human host. The hydrocarbon-polluted environments yielded yet another spectrum of chaetothyrialean fungi. These observations are of great relevance because they allow us to distinguish between categories of opportunists, indicating possible differences in pathogenicity and virulence.

ENVIRONMENTAL TEMPERATURES IN FLORIDA DAIRY HOUSING

Environmental conditions in all air-conditioned barn and in evaporatively cooled sprinkler and fall and tunnel-ventilated barns are compared and recommendations for dairy barn design for hot, humid climates arc, given. Temperature Humidity Indexes (THI) observed in the air-conditioned barn were always below 72. Average THIs ill the evaporatively cooled barns during afternoon hours were seldom less than 75. The environmental conditions observed in these studies are typical for many, areas adjacent to the Gulf Coast of the United States and for tropical regions throughout the world. Providing comfortable environmental conditions for cows housed in area with hot, humid climates is difficult using only evaporative cooling and ventilation. Air-conditioning dairy housing is a possible alternative method, particularly for high value cows.

Mechanistic aspects of the isomerization of Z-vinylic tellurides double bonds in the synthesis of potassium Z-vinyltrifluoroborate salts

Through direct transmetalation reaction of Z-vinylic tellurides with nBuLi was observed the unexpected isomerization of double bonds leading to potassium E-vinyltrifluoroborates salts in low to moderate yields. Using EPR spin trapping experiments the radical species that promoted the stereoinversion of Z-vinylic organometallic species during the preparation of potassium vinyltrifluoroborate salts was identified. The experiments support the proposed mechanism, which is based on the homolytic cleavage of the TenBu bond.

Reproductive aspects of Meloetyphlus fuscatus a meloid beetle cleptoparasite of the bee Eulaema nigrita (Hymenoptera, Apidae, Euglossini)

This study investigated the reproductive biology of the meloid beetle Meloetyphlus fuscatus Waterhouse, a cleptoparasite of Eulaema nigrita nests. New E. nigrita nests had rates of cell parasitism by meloids ranging from 3.7% to 15.8%, while in re-used nests the rate of cell parasitism ranged from 1.4% to 18.7%. The adult parasites were never observed trying to leave the host nests. Both sexes mated more than once. Females had a high fecundity (more than 8,000 eggs), and in most cases, deposited their eggs into the empty, old cells of the host. The triungulins (the first larval instars) hatched from eggs 18-20 days after oviposition and dispersed from the host nest by attaching themselves to males as they emerged. The triungulins most likely transfer to female bees during mating and are transported to the nests of their hosts. Within an attacked cell, the triungulin consumes the bee egg and completes its development by consuming the larval food stored in the cell.

INTERPOPULATION COMPARISON OF REPRODUCTION OF THE ATLANTIC SHRIMP HIPPOLYTE OBLIQUIMANUS (CARIDEA: HIPPOLYTIDAE)

The genus Hippolyte is represented by typically small shrimps with intriguing mechanisms of reproduction. In order to study possible variability in reproductive aspects among different populations, we conducted an exhaustive comparative study of H. obliquimanus from South (Brazil) and Central American (Costa Rica) waters. The study focuses on fecundity and reproductive output. Mean size of ovigerous females was significantly larger, and both mean reproductive output and mean fecundity were significantly higher in specimens from Costa Rica then in those collected in Brazil. Embryo volume was significantly smaller in the Costa Rican population, and in both populations embryos doubled their volume during embryogenesis. We discuss and compare our findings with the information available regarding H. obliquimanus and other hippolytid shrimp. The reproductive traits of both populations of H. obliquimanus show some important differences which may reflect adaptations to local environmental conditions, demonstrating a high plasticity of reproductive features of the species in Brazilian and Costa Rican waters.

Brazilian foreign policy: Old and new paths as regards institutional aspects, multilateralism and foreign policy towards the South

This paper emphasizes the important changes in Brazilian foreign policy after Luiz Inacio Lula da Silva took tip the power in 2002. The paper defends the idea that it is not possible to argue that there were deep changes in comparison to Cardoso's administration. However, evidence shows that new things are happening as regards the design of a more active and clear foreign action line which led to institutional changes and to more incisive multilateral paths. This results both from the political profile of the direct operators of foreign policy and the aims of lite presidential diplomacy, The hypothesis dealt with on this paper consists on the fact that Lula's administration has not fully broken with the old administration practices, however the aims of global and regional integration are being plotted more clearly and with a higher degree of activism. This becomes clear in three aspects of the Brazilian foreign policy: the institutional framework, the practice of multilateralism and the foreign policy towards the South, the three topics analyzed in this paper.

Ergonomic Aspects Related to Surgeon Position in Laparoscopic Radical Prostatectomy

Purpose: The aim is to evaluate the level of inclination of the surgeon's spinal column (ISSC) while performing laparoscopic radical prostatectomy (LRP) when using one trocar on each side of the patient abdomen (""torero"" position) in two scenarios: With and without a thin head supporter adapted to the table. Materials and Methods: Based on trigonometric principles, we elaborated a formula to calculate the ISSC for a determined surgeon and surgical table while performing LRP in the torero position. The parameters considered were the width of the surgical table (m), the distance between the surgeon's anterior superior iliac spines (q), and the distance from the central point between the surgeon's anterior superior iliac spines to the surgeon's head (h). We used the formula alpha = 90 degree-cos(-1)(b/h) (where b = q/2 + m/2) in an Excel sheet to calculate the angle of inclination of the surgeon's spinal column. We applied the measures of 12 surgeons with different biotypes of our staff to calculate the ISSC with and without the thin head supporter. Results: The use of a thin head supporter reduced the mean ISCC in the torero position from 36.1 +/- 3.73 degrees (range 31.3 to 49.8 degrees) to 22.1 +/- 4.9 degrees (range 18.7 to 32.9 degrees), which corresponds to a reduction of 38.8% in the mean angle of inclination. This difference was statistically significant (P < 0.001). Conclusion: The use of a thin head supporter adapted to the surgical table objectively reduces lateral inclination of the surgeon's spinal column in the torero position, making LRP a more comfortable procedure.

Cardiac arrhythmia emergency room visits and environmental air pollution in Sao Paulo, Brazil

Objectives: Air-pollution exposure has been associated with increased cardiovascular hospital admissions and mortality in time-series studies. We evaluated the relation between air pollutants and emergency room (ER) visits because of cardiac arrhythmia in a cardiology hospital. Methods: In a time-series study, we evaluated the association between the emergency room visits as a result of cardiac arrhythmia and daily variations in SO2, CO, NO2, O-3 and PM10, from January 1998 to August 1999. The cases of arrhythmia were modelled using generalised linear Poisson regression models, controlling for seasonality (short-term and long-term trend), and weather. Results: Interquartile range increases in CO (1.5 ppm), NO2 (49,5 mu g/m(3)) and PM10 (22.2 mu g/m(3)) on the concurrent day were associated with increases of 12.3% (95% CI: 7.6% to 17.2%), 10.4% (95% CI: 5.2% to 15.9%) and 6.7% (95% CI: 1.2% to 12.4%) in arrhythmia ER visits, respectively. PM10, CO and NO2 effects were dose-dependent and gaseous pollutants had thresholds. Only CO effect resisted estimates in models with more than one pollutant. Conclusions: Our results showed that air pollutant effects on arrhythmia are predominantly acute starting at concentrations below air quality standards, and the association with CO and NO2 suggests a relevant role for pollution caused by cars.