37 resultados para Because I tell a joke or two
Resumo:
Objective To test the hypothesis that red blood cell (RBC) transfusions in preterm infants are associated with increased intra-hospital mortality. Study design Variables associated with death were studied with Cox regression analysis in a prospective cohort of preterm infants with birth weight <1500 g in the Brazilian Network on Neonatal Research. Intra-hospital death and death after 28 days of life were analyzed as dependent variables. Independent variables were infant demographic and clinical characteristics and RBC transfusions. Results Of 1077 infants, 574 (53.3%) received at least one RBC transfusion during the hospital stay. The mean number of transfusions per infant was 3.3 +/- 3.4, with 2.1 +/- 2.1 in the first 28 days of life. Intra-hospital death occurred in 299 neonates (27.8%), and 60 infants (5.6%) died after 28 days of life. After adjusting for confounders, the relative risk of death during hospital stay was 1.49 in infants who received at least one RBC transfusion in the first 28 days of life, compared with infants who did not receive a transfusion. The risk of death after 28 days of life was 1.89 times higher in infants who received more than two RBC transfusions during their hospital stay, compared with infants who received one or two transfusions. Conclusion Transfusion was associated with increased death, and transfusion guidelines should consider risks and benefits of transfusion. (J Pediatr 2011; 159: 371-6).
Resumo:
There is a considerable interindividual variation in L-thyroxine [ 3,5,3`,5`-tetraiodo-l-thyronine (T(4))] dose required for thyrotropin (thyroid-stimulating hormone) suppression in patients with differentiated thyroid cancer. To investigate whether uridine diphosphate-glucuronosyl transferase 1A1 (UGT1A1)-mediated T(4) glucuronidation in liver affects T(4) dose, we genotyped 101 patients for the common UGT1A1-53(TA)(n) polymorphism and compared T(4) doses among patients having zero (5/6 and 6/6 genotypes), one (6/7 genotype), or two (7/7 and 7/8 genotypes) copies of the low-expression (TA) 7 and (TA) 8 alleles. A significant trend for decreasing T(4) dose with increasing number of copies of (TA)(7) and (TA)(8) (P = 0.037) and significant difference in T(4) dose across the UGT1A1-53(TA)(n) genotypes (P = 0.048) were observed, despite considerable overlap of T(4) doses among different genotypes. These results are consistent with reduced T(4) glucuronidation in patients with low-expression (TA) 7 and (TA) 8 alleles and provide the first evidence for association between UGT1A1-53(TA)(n) and T(4)-dose requirement for thyroid-stimulating hormone suppression in a natural clinical setting. Pharmacogenetics and Genomics 21: 341-343 (C) 2011 Wolters Kluwer Health | Lippincott Williams & Wilkins. Pharmacogenetics and Genomics 2011, 21: 341-343
Resumo:
Principal cells of the medial nucleus of the trapezoid body (MNTB) are simple round neurons that receive a large excitatory synapse (the calyx of Held) and many small inhibitory synapses on the soma. Strangely, these neurons also possess one or two short tufted dendrites, whose function is unknown. Here we assess the role of these MNTB cell dendrites using patch-clamp recordings, imaging and immunohistochemistry techniques. Using outside-out patches and immunohistochemistry, we demonstrate the presence of dendritic Na(+) channels. Current-clamp recordings show that tetrodotoxin applied onto dendrites impairs action potential (AP) firing. Using Na(+) imaging, we show that the dendrite may serve to maintain AP amplitudes during high-frequency firing, as Na(+) clearance in dendritic compartments is faster than axonal compartments. Prolonged high-frequency firing can diminish Na(+) gradients in the axon while the dendritic gradient remains closer to resting conditions; therefore, the dendrite can provide additional inward current during prolonged firing. Using electron microscopy, we demonstrate that there are small excitatory synaptic boutons on dendrites. Multi-compartment MNTB cell simulations show that, with an active dendrite, dendritic excitatory postsynaptic currents (EPSCs) elicit delayed APs compared with calyceal EPSCs. Together with high- and low-threshold voltage-gated K(+) currents, we suggest that the function of the MNTB dendrite is to improve high-fidelity firing, and our modelling results indicate that an active dendrite could contribute to a `dual` firing mode for MNTB cells (an instantaneous response to calyceal inputs and a delayed response to non-calyceal dendritic excitatory postsynaptic potentials).
Resumo:
Clinical and demographic presurgical variables may be associated with unfavorable postsurgical neurological outcome in patients with mesial temporal lobe epilepsy with hippocampal sclerosis (MTLE-HS). However, few reports include preoperative psychiatric disorders as a factor predictive of long-term post-surgical MTLE-HS neurological Outcome. We used Engel`s criteria to follow 186 postsurgical patients with MTLE-HS for an average of 6 years. DSM-IV criteria and psychiatric comorbidity criteria specific to epilepsy (interictal dysphoric disorder, postictal and interictal psychosis) were used to assess presurgical psychiatric disorders. Kaplan-Meier event-free Survival and adjusted hazard ratios were estimated with unconditional logistic regression. Seventy-seven (41.4%) patients had a preoperative Axis I psychiatric diagnosis. Thirty-six patients had depression, I I interictal dysphoric disorder, 14 interictal psychosis, 6 postictal psychosis, and 10 anxiety disorders. Twenty-three (12.4%) patients had Axis 11 personality disorders. Regarding seizure outcome, preoperative anxiety disorders (P = 0.009) and personality disorders (P = 0.003) were positively Correlated with Engel class I B (remaining auras) or higher. These findings emphasize the importance of presurgical psychiatric evaluation, counseling, and Postsurgical follow-up of patients with epilepsy and psychiatric disorders. (C) 2009 Elsevier Inc. All rights reserved.
Resumo:
This study evaluated the influence of adhesive layer thickness (ADL) on the resin-dentin bond strength of two adhesive systems (AS) after ther-mal and mechanical loading (TML). A flat superficial dentin surface was exposed with 600-grit SiC paper on 40 molars. After primer application, the adhesive layer of Scotchbond Multipurpose (SBMP) or Clearfil SE Bond (CSEB) was applied in one or two layers to a delimited area (52 mm(2)) and resin blocks (Filtek 2250) were built incrementally: Half of the sample was stored in distilled water (37 C, 24 hours) and submitted to thermal (1,000; 5 degrees-55 degrees C) and mechanical cycles (500,000; 10kgf) [TML]. The other half was stored in distilled water (72 hours). The teeth were then sectioned to obtain sticks (0.8 mm(2)) to be tested under tensile mode (1.0 mm/minute). The fracture mode was analyzed at 400x. The BS from all sticks from the same tooth was averaged for statistical purposes. The data was analyzed by three-way ANOVA. The x(2) test was used (p<0.05) to compare the frequency of pre-testing failure specimens. Higher BS values were observed for SBMP regardless of the ADL. The TML reduced the BS values irrespective of the adhesive employed and the ADL. A higher frequency of pre-testing failure specimens was observed for the cycled groups. A thicker adhesive layer, acting as an intermediate flexible layer, did not min-imize the damage caused by thermal/mechanical load cycling for a three-step etch-and-rinse and two-step self-etch system.
Resumo:
This study evaluated the effect of 2% chlorhexidine digluconate (CHX) used as a therapeutic primer on the long-term bond strengths of two etch-and-rinse adhesives to normal (ND) and caries-affected (CAD) dentin. Forty extracted human molars with coronal carious lesions, surrounded by normal dentin, were selected for this study. The flat surfaces of two types of dentin (ND and CAD) were prepared with a water-cooled high-speed diamond disc, then acidetched, rinsed and air-dried. In the control groups, the dentin was re-hydrated with distilled water, blot-dried and bonded with a three-step (Scotchbond Multi-Purpose-MP) or two-step (Single Bond 2-SB) etch-and-rinse adhesive. In the experimental groups, the dentin was rehydrated with 2% CHX (60 seconds), blot-dried and bonded with the same adhesives. Resin composite build-ups were made. The specimens were prepared for microtensile bond testing in accordance with the non-trimming technique, then tested either immediately or after six-months storage in artificial saliva. The data were analyzed by ANOVA/Bonferroni tests (alpha=0.05). CHX did not affect the immediate bond strength to ND or CAD (p>0.05). CHX treatment significantly lowered the loss of bond strength after six months as seen in the control bonds for ND (p<0.05), but it did not alter the bond strength of CAD (p>0.05). The application of NIP on CHX-treated ND or CAD produced bonds that did not change over six months of storage.
Resumo:
The aim of this study was to analyze if the presence of impacted third molars, and their positions in the mandibular angle, can change the bone quality in this area, considering the measure of the cortical thickness in this region as representative or not for mandible fracture risk. Software was used to analyze 50 digital images from panoramic radiographs of patients who had one or two impacted third molars in the mandible, and 30 digital images of patients with agenesis of the mandibular third molar. The thickness of the cortical region of the mandible was measured; it was possible to draw a parallel line to the posterior portion of the mandible and a parallel line to the body of this bone on each side of the image. At the intersection of these lines near the distal portion of the second molar, another line was set up to serve as reference in the cortical thickness measurement. It could be concluded that the cortical thickness of the mandibular angle in male patients without impacted third molars was greater than the thickness in patients with these teeth, and no difference in thickness was found for the female group.