Effects of biomass burning on nasal mucociliary clearance and mucus properties after sugarcane harvesting

Objective: Biofuel from sugarcane is widely produced in developing countries and is a clean and renewable alternative source of energy. However, sugarcane harvesting is mostly performed after biomass burning. The aim of this study was to evaluate the effects of harvesting after biomass burning on nasal mucociliary clearance and the nasal mucus properties of farm workers. Methods: Twenty seven sugarcane workers (21-45 years old) were evaluated at the end of two successive time-periods: first at the end of a 6-month harvesting period (harvesting), and then at the end of a 3-month period without harvesting (non-harvesting). Nasal mucociliary clearance was evaluated by the saccharine transit test, and mucus properties were analyzed using in vitro mucus contact angle and mucus transportability by sneeze. Arterial blood pressure, heart rate, respiratory rate, pulse oximetry, body temperature, associated illness, and exhaled carbon monoxide were registered. Results: Data are presented as mean values (95% confidence interval). The multivariate model analysis adjusted for age, body-mass index, smoking status and years of working with this agricultural practice showed that harvesting yielded prolonged saccharine transit test in 7.83 min (1.88-13.78), increased mucus contact angle in 8.68 degrees (3.18-14.17) and decreased transportability by sneeze in 32.12 mm (-44.83 to -19.42) compared with the non-harvesting period. No significant differences were detected in any of the clinical parameter at either time-period. Conclusion: Sugarcane harvesting after biomass burning negatively affects the first barrier of the respiratory system in farm workers by impairing nasal mucociliary clearance and inducing abnormal mucus properties. (C) 2011 Elsevier Inc. All rights reserved.

Preoperative respiratory muscle dysfunction is a predictor of prolonged invasive mechanical ventilation in cardiorespiratory complications after heart valve surgery

Objective: To verify whether preoperative respiratory muscle strength and ventilometric parameters, among other clinically relevant factors, are associated with the need for prolonged invasive mechanical ventilation (PIMV) due to cardiorespiratory complications following heart valve surgery. Methods: Demographics, preoperative ventilometric and manometric data, and the hospital course of 171 patients, who had undergone heart valve surgery at Hospital das Clinicas da Faculdade de Medicina de Ribeirao Preto, were prospectively collected and subjected to univariate analysis for identifying the risk factors for PIMV. Results: The hospital mortality was 7%. About 6% of the patients, who had undergone heart valve surgery required PIMV because of postoperative cardiorespiratory dysfunction. Their hospital mortality was 60% (vs 4%, p < 0.001). Univariate analysis revealed that preoperative respiratory muscle dysfunction, characterized by maximal inspiratory and expiratory pressure below 70% of the predicted values combined with respiratory rate above 15 rpm during ventilometry, was associated with postoperative PIMV (p = 0.030, odds ratio: 50, 95% confidence interval (CI): 1.2-18). Postoperative PIMV was also associated with: (1) body mass index (BMI) < 18.5 (odds ratio: 7.2, 95% CI: 1.5-32), (2) body weight < 50 kg (odds ratio: 6.5, 95% CI: 1.6-25), (3) valve operation due to acute endocarditis (odds ratio: 5.5, 95% CI: 0.98-30), and (4) concomitant operation for mitral and tricuspid valve dysfunction (p = 0.047, odds ratio: 5.0, 95% CI: 1.1-22). Conclusion: Our results have demonstrated that respiratory muscle dysfunction, among other clinical factors, is associated with the need for PIMV due to cardiovascular or pulmonary dysfunction after heart valve surgery. (C) 2010 European Association for Cardio-Thoracic Surgery. Published by Elsevier B. V. All rights reserved.

Symptoms of Temporomandibular Disorders in the Population: An Epidemiological Study

Aims: To estimate the prevalence of symptoms of temporomandibular disorders (TMD) as a function of age and gender, in a representative urban sample from the Brazilian population. Methods: A total of 1,230 inhabitants (51.5% women) aged 15 to 65 years were interviewed by a validated phone survey. Sample size had been previously calculated. TMD symptoms were assessed through five questions, as recommended by the American Academy of Orofacial Pain, in an attempt to identify possible TMD. Data were derived by age and gender. Prevalence of each TMD symptom, and of combination of symptoms, was calculated. Results: At least one TMD symptom was reported by 39.2% of the individuals. Pain related to TMD was noted by 25.6% of the population. Temporomandibular joint (TMJ) sound was the most common symptom of TMD, followed by TMJ pain and masticatory muscle pain. All symptoms were more prevalent in women than in men. With men used as the reference, a relative risk (RR) of at least one TMD symptom in women was 1.31 (95% confidence interval [CI] = 1.14 to 1.52). When at least two symptoms were present, the RR was 1.93 (95% CI = 1.49 to 2.51). For three or more TMD symptoms, the RR was 2.49 (95% CI = 1.67 to 3.71). Women were also more likely than men to have TMD pain (RR = 1.78; 9% CI = 1.45 to 2.18). Conclusion: Individual symptoms, as well as a combination of TMD symptoms, are prevalent in the Brazilian urban population and are more frequent in women than in men. Additional studies should focus on risk factors for and relevance of TMD for the sufferers. J OROFAC PAIN 2010;24:270-278

Headache and Symptoms of Temporomandibular Disorder: An Epidemiological Study

Objectives.-A population-based cross-sectional study was conducted to estimate the prevalence of migraine, episodic tension-type headaches (ETTH), and chronic daily headaches (CDH), as well as the presence of symptoms of temporomandibular disorders (TMD) in the adult population. Background.-The potential comorbidity of headache syndromes and TMD has been established mostly based on clinic-based studies. Methods.-A representative sample of 1230 inhabitants (51.5% women) was interviewed by a validated phone survey. TMD symptoms were assessed through 5 questions, as recommended by the American Academy of Orofacial Pain, in an attempt to classify possible TMD. Primary headaches were diagnosed based on the International Classification of Headache Disorders. Results.-When at least 1 TMD symptom was reported, any headache happened in 56.5% vs 31.9% (P < .0001) in those with no symptoms. For 2 symptoms, figures were 65.1% vs 36.3% (P < .0001); for 3 or more symptoms, the difference was even more pronounced: 72.8% vs 37.9%. (P < .0001). Taking individuals without headache as the reference, the prevalence of at least 1 TMD symptom was increased in ETTH (prevalence ratio = 1.48, 95% confidence interval = 1.20-1.79), migraine (2.10, 1.80-2.47) and CDH (2.41, 1.84-3.17). At least 2 TMD symptoms also happened more frequently in migraine (4.4, 3.0-6.3), CDH (3.4; 1.5-7.6), and ETTH (2.1; 1.3-3.2), relative to individuals with no headaches. Finally, 3 or more TMD symptoms were also more common in migraine (6.2; 3.8-10.2) than in no headaches. Differences were significant for ETTH (2.7 1.5-4.8), and were numerically but not significant for CDH (2.3; 0.66-8.04). Conclusions.-Temporomandibular disorder symptoms are more common in migraine, ETTH, and CDH relative to individuals without headache. Magnitude of association is higher for migraine. Future studies should clarify the nature of the relationship.

Impact of specific sensitization on asthma and rhinitis in young Brazilian and Chilean adults

Background The pattern of associations and the attributable fractions (AF) of atopic conditions due to specific sensitizations vary between countries. Objective To assess the level of associations and AF between sensitization to five allergens and atopic conditions in two settings. Methods We studied 2063 Brazilians and 1231 Chileans of both sexes using representative samples selected at birth in the 1970s. Information on asthma and rhinitis was based on the European Community Respiratory Health Survey questionnaire. We assessed bronchial hyperresponsiveness (BHR) to methacholine and sensitization to Dermatophagoides pteronyssinus, cat, dog, grass blend and Alternaria alternata. Results The prevalence of sensitization to one or more allergens was 50% in Brazilians and 22% in Chileans. The level of associations varied according to the outcome used. Strong associations between sensitization and asthma, defined as wheeze or awakening with breathlessness at night and positive BHR, were found for each of the five allergens in Chileans [varying from odds ratio (OR) 3.24, 95% confidence interval (CI) 1.47, 7.15 for D. pteronyssinus to 8.44, 95% CI 3.82, 18.66 for cat], whereas the level of associations was restricted to D. pteronyssinus, cat and dog in Brazilians and was somewhat weaker (highest OR 3.90, 95% CI 2.80-5.44). The AF of sensitization on asthma was 54% in Brazil and 44% in Chile. D. pteronyssinus and cat made an independent contribution to asthma in the two samples. The patterns of associations between sensitization and rhino-conjunctivitis were similar to those for asthma. Conclusion The associations between sensitization, and asthma and rhinitis were high in Chile and moderately high in Brazil, but the AF were higher in Brazil, reflecting a higher prevalence of sensitization. In Brazil, dust mite had the greatest impact on atopic conditions while in Chile several allergens had an impact. Sensitization is as serious a problem in Chile and Brazil as in developed countries.

Effect of ion exchange on strength and slow crack growth of a dental porcelain

Objectives. To determine the effect of ion exchange on slow crack growth (SCG) parameters (n, stress corrosion susceptibility coefficient, and sigma(f0), scaling parameter) and Weibull parameters (m, Weibull modulus, and sigma(0), characteristic strength) of a dental porcelain. Methods. 160 porcelain discs were fabricated according to manufacturer`s instructions, polished through 1 mu m and divided into two groups: GC (control) and GI (submitted to an ion exchange procedure using a KNO(3) paste at 470 degrees C for 15 min). SCG parameters were determined by biaxial flexural strength test in artificial saliva at 37 degrees C using five constant stress rates (n =10). 20 specimens of each group were tested at 1 MPa/s to determine Weibull parameters. The SPT diagram was constructed using the least-squares fit of the strength data versus probability of failure. Results. Mean values of m and sigma(0) (95% confidence interval), n and sigma(f0) (standard deviation) were, respectively: 13.8 (10.1-18.8) and 60.4 (58.5 - 62.2), 24.1 (2.5) and 58.1 (0.01) for GC and 7.4 (5.3 -10.0) and 136.8 (129.1-144.7), 36.7 (7.3) and 127.9 (0.01) for GI. Fracture stresses (MPa) calculated using the SPT diagram for lifetimes of 1 day, 1 year and 10 years (at a 5% failure probability) were, respectively, 31.8, 24.9 and 22.7 for GC and 71.2, 60.6 and 56.9 for GI. Significance. For the porcelain tested, the ion exchange process improved strength and resistance to SCG, however, the material`s reliability decreased. The predicted fracture stress at 5% failure probability for a lifetime of 10 years was also higher for the ion treated group. (C) 009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Risk factors for dental erosion in a group of 12- and 16-year-old Brazilian schoolchildren

Background. Dental erosion is a multifactorial disease and is associated with dietary habits in infancy and adolescence. Aim. To investigate possible associations among dental erosion and diet, medical history and lifestyle habits in Brazilian schoolchildren. Design. The sample consisted of a random single centre cluster of 414 adolescents (12- and 16-years old) of both genders from private and public schools in Bauru (Brazil). The O`Brien [Children`s Dental Health in the United Kingdom, 1993 (1994) HMSO, London] index was used for dental erosion assessment. Data on medical history, rate and frequency of food and drinks consumption, and lifestyle habits were collected by a self-reported questionnaire. Odds ratios with 95% confidence intervals were used to assess the univariate relationships between variables. Analysis of questionnaire items was performed by multiple logistic regression analysis. The statistical significance level was set at 5%. Results. The erosion present group comprised 83 subjects and the erosion absent group 331. There were no statistically significant correlations among dental erosion and the consumption of food and drinks, medical history, or lifestyle habits. Conclusion. The results indicate that there was no correlation between dental erosion and the risk factors analysed among adolescents in Bauru/Brazil and further investigations are necessary to clarify the multifactorial etiology of this condition.

Early Bone Healing and Biomechanical Fixation of Dual Acid-Etched and As-Machined Implants with Healing Chambers: An Experimental Study in Dogs

Purpose: To evaluate the biomechanical fixation, bone-to-implant contact (BIC), and bone morphology of screw-type root-form implants with healing chambers with as-machined or dual acid-etched (DAE) surfaces in a canine model. Materials and Methods: The animal model included the placement of machined (n = 24) and DAE (n = 24) implants along the proximal tibiae of six mongrel dogs, which remained in place for 2 or 4 weeks. Following euthanasia, half of the specimens were subjected to biomechanical testing (torque to interface failure) and the other half were processed for histomorphologic and histomorphometric (%BIC) assessments. Statistical analyses were performed by one-way analysis of variance at the 95% confidence level and the Tukey post hoc test for multiple comparisons. Results: At 4 weeks, the DAE surface presented significantly higher mean values for torque to interface failure overall. A significant increase in %BIC values occurred for both groups over time. For both groups, bone formation through the classic appositional healing pathway was observed in regions where intimate contact between the implant and the osteotomy walls occurred immediately after implantation. Where contact-free spaces existed after implantation (healing chambers), an intramembranous-like healing mode with newly formed woven bone prevailed. Conclusions: In the present short-term evaluation, no differences were observed in BIC between groups; however, an increase in biomechanical fixation was seen from 2 to 4 weeks with the DAE surface. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:75-82

Procalcitonin is useful in identifying bacteraemia among children with pneumonia

Empirical antibiotic use is prescribed in managing children with pneumonia worldwide. We assessed the usefulness of procalcitonin (PCT) and interferon-alpha (IFN-alpha) in differentiating viral from bacterial pneumonia. Among 159 hospitalized children, pneumonia was diagnosed based on clinical complaints plus pulmonary infiltrate. Aetiology was investigated for 9 viruses and 4 atypical and 3 typical bacteria. PCT and IFN-alpha were measured in the serum sample collected on admission. Eight patients had bacteraemic infections, 38 had non-bacteraemic typical infections, and 19 patients had atypical bacterial infections. Viral and unknown aetiology was established in 57 (36%) and 34 (21%) cases, respectively. Three patients with bacterial infection without collected blood culture were excluded. IFN-alpha (IU/ml) was detectable in 20 (13%) cases. The difference among median PCT values of the bacteraemic (4.22; 1.56-7.56), non-bacteraemic typical bacterial (1.47; 0.24-4.07), atypical bacterial (0.18; 0.06-1.03) and only viral (0.65; 0.11-2.22) subgroups was significant (p = 0.02). PCT was >= 2 ng/ml in 52 (33%) cases. The presence of IFN-alpha was associated with PCT <2 ng/ml (90% vs. 64%, p = 0.02). The negative predictive value (95% confidence interval) of PCT >= 2 ng/ml was 95% (89-100%), 89% (78-100%), 93% (85-100%) for differentiation of bacteraemic from viral, atypical bacterial and non-bacteraemic typical bacterial infection, respectively, and 58% (49-68%) for differentiation between bacterial and viral infection. PCT may be useful in identifying bacteraemia among children hospitalized with community-acquired pneumonia. IFN-alpha was uncommonly detected.

Non-stationary frequency analysis of extreme daily rainfall in Sao Paulo, Brazil

This work is an assessment of frequency of extreme values (EVs) of daily rainfall in the city of Sao Paulo. Brazil, over the period 1933-2005, based on the peaks-over-threshold (POT) and Generalized Pareto Distribution (GPD) approach. Usually. a GPD model is fitted to a sample of POT Values Selected With a constant threshold. However. in this work we use time-dependent thresholds, composed of relatively large p quantities (for example p of 0.97) of daily rainfall amounts computed from all available data. Samples of POT values were extracted with several Values of p. Four different GPD models (GPD-1, GPD-2, GPD-3. and GDP-4) were fitted to each one of these samples by the maximum likelihood (ML) method. The shape parameter was assumed constant for the four models, but time-varying covariates were incorporated into scale parameter of GPD-2. GPD-3, and GPD-4, describing annual cycle in GPD-2. linear trend in GPD-3, and both annual cycle and linear trend in GPD-4. The GPD-1 with constant scale and shape parameters is the simplest model. For identification of the best model among the four models WC used rescaled Akaike Information Criterion (AIC) with second-order bias correction. This criterion isolates GPD-3 as the best model, i.e. the one with positive linear trend in the scale parameter. The slope of this trend is significant compared to the null hypothesis of no trend, for about 98% confidence level. The non-parametric Mann-Kendall test also showed presence of positive trend in the annual frequency of excess over high thresholds. with p-value being virtually zero. Therefore. there is strong evidence that high quantiles of daily rainfall in the city of Sao Paulo have been increasing in magnitude and frequency over time. For example. 0.99 quantiles of daily rainfall amount have increased by about 40 mm between 1933 and 2005. Copyright (C) 2008 Royal Meteorological Society

Absolute determination of soluble potassium in tea infusion by gamma-ray spectroscopy

Potassium content in tea brew was determined by gamma-ray spectroscopy, Using the 1461 keV gamma-ray fro M (40)K, the naturally occurring radioactive isotope of potassium. We measured radiation with a shielded HPGe detector from individual test samples of tea leaves, before and after infusion preparation, and from commercial instant tea powder. The correction factor for the gamma-ray self-absorption in the extended source was determined with the help of Monte-Carlo simulations. This gamma-ray spectroscopy technique enabled the absolute determination of potassium content with a relative uncertainty smaller than 4%, at the one standard deviation confidence level, showing the feasibility of this method. An experiment to evaluate a possible systematic Uncertainty due to K distribution heterogeneity in the sample was performed, with file result that the corresponding relative standard deviation is smaller than 2% at 95% confidence level. (C) 2009 Elsevier Ltd. All rights reserved.

Development of a sequential injection-square wave voltammetry method for determination of paraquat in water samples employing the hanging mercury drop electrode

This work describes the development and optimization of a sequential injection method to automate the determination of paraquat by square-wave voltammetry employing a hanging mercury drop electrode. Automation by sequential injection enhanced the sampling throughput, improving the sensitivity and precision of the measurements as a consequence of the highly reproducible and efficient conditions of mass transport of the analyte toward the electrode surface. For instance, 212 analyses can be made per hour if the sample/standard solution is prepared off-line and the sequential injection system is used just to inject the solution towards the flow cell. In-line sample conditioning reduces the sampling frequency to 44 h(-1). Experiments were performed in 0.10 M NaCl, which was the carrier solution, using a frequency of 200 Hz, a pulse height of 25 mV, a potential step of 2 mV, and a flow rate of 100 mu L s(-1). For a concentration range between 0.010 and 0.25 mg L(-1), the current (i(p), mu A) read at the potential corresponding to the peak maximum fitted the following linear equation with the paraquat concentration (mg L(-1)): ip = (-20.5 +/- 0.3) Cparaquat -(0.02 +/- 0.03). The limits of detection and quantification were 2.0 and 7.0 mu g L(-1), respectively. The accuracy of the method was evaluated by recovery studies using spiked water samples that were also analyzed by molecular absorption spectrophotometry after reduction of paraquat with sodium dithionite in an alkaline medium. No evidence of statistically significant differences between the two methods was observed at the 95% confidence level.

A green flow-based procedure for fluorimetric determination of acid-dissociable cyanide in natural waters exploiting multicommutation

A flow system designed with solenoid valves is proposed for determination of weak acid dissociable cyanide, based on the reaction with o-phthalaldehyde (OPA) and glycine yielding a highly fluorescent isoindole derivative. The proposed procedure minimizes the main drawbacks related to the reference batch procedure, based on reaction with barbituric acid and pyridine followed by spectrophotometric detection, i.e., use of toxic reagents, high reagent consumption and waste generation, low sampling rate, and poor sensitivity. Retention of the sample zone was exploited to increase the conversion rate of the analyte with minimized sample dispersion. Linear response (r=0.999) was observed for cyanide concentrations in the range 1-200 mu g L(-1), with a detection limit (99.7% confidence level) of 0.5 mu g L(-1)(19 nmol L(-1)). The sampling rate and coefficient of variation (n=10) were estimated as 22 measurements per hour and 1.4%, respectively. The results of determination of weak acid dissociable cyanide in natural water samples were in agreement with those achieved by the batch reference procedure at the 95% confidence level. Additionally to the improvement in the analytical features in comparison with those of the flow system with continuous reagent addition (sensitivity and sampling rate 90 and 83% higher, respectively), the consumption of OPA was 230-fold lower.

Elemental analysis of nuts and seeds by axially viewed ICP OES

A method for the multi-elemental determination of metals (Al, Ba, Ca, Cu, Fe, K, Mg, Mn, Sr and Zn), metalloids (B and Si), and non-metals (Cl, P and 5) in the babassu nut and mesocarp, sapucaia nut, coconut pulp, cupuassu pulp and seed, and cashew nut by axially viewed inductively coupled plasma optical emission spectrometry is presented. A diluted oxidant mixture (2 ml HNO(3) + 1 ml H(2)O(2) + 3 ml H(2)O) was used to achieve the complete decomposition of the organic matrix in a closed-vessel microwave oven. The accuracy of the entire proposed method was confirmed by standard reference material analysis (peach leaves-NIST SRM1547). The certified values showed a good agreement at a 95% confidence limit (Student`s t-test). The average RSD for repeatability of calibration solutions measurements were in the range of 1.1-6.7%. Limits of quantification (LOQ = 10 x LOD) were in the level of 0.00072-0.0532 mg/l. The macro and micronutrient ranges in the different nuts and seeds did not exceed the dietary reference intake (DRI), except for Mn in the babassu nut. (C) 2010 Published by Elsevier Ltd.

Comparasion of two minimally invasive methods on the longevity of glass ionomer cement restorations: short-term results of a pilot study

The purpose of this study was to evaluate the clinical performance of glass ionomer cement (GIC) restorations comparing two minimally invasive methods in permanent teeth after 12 months. Fifty pregnant women (second trimester of pregnancy), mean age 22 ± 5.30 years, were treated by two previously trained operators. The treatment approaches tested were: chemomechanical method (CarisolvTM; MediTeam) and atraumatic restorative treatment (ART). A split-mouth study design was used in which the two treatments were randomly placed in 50 matched pairs of permanent teeth. The chemomechanical method (CM) was the test group and the ART was the control group. The treatments were performed in Public Health Centers. The tested restorative material was a high-strength GIC (Ketac Molar; 3M/ESPE). The restorations were placed according to the ART guidelines. Two calibrated independent examiners evaluated the restorations in accordance with ART criteria. The inter-examiner kappa was 0.97. Data were analyzed using 95% confidence interval on the binomial distribution and Fisher's exact test at 5% significance level. In a 12-month follow-up, 86% of the restorations were evaluated. In the test group (CM), 100% (CI=93.3-100%) of the restorations were considered successful. In the control group (ART) 97.6% (CI=87.4-99.9%) of the restorations were considered successful and 2.4% unsuccessful (marginal defect >0.5 mm). There was no statistically significant difference between the 12-mounth success rate for both groups (Fisher's exact test: P=0.49) and between the two operators (Fisher's exact test: P=1.00). Both minimally invasive methods, chemomechanical method and ART, showed a similar clinical performance after 12 months of follow up.