33 resultados para house dust mites
Resumo:
Electric arc furnace steel dust is a by-product of the steelmaking process and contains high amounts of the iron and zinc and significant amounts of lead, chromium, and cadmium. Metal recycling however, is not always economically feasible, especially due to the complex mineralogical composition of this material. In this study an application of this material is presented. Ceramics were produced with clay and variable amounts of steel dust. The bulk material was fired between 800 and 1100 degrees C. The influence of the composition and the processing temperature on the mechanical strength, linear shrinkage, water absorption, apparent density and bending strength and metal leaching of the ceramic samples was investigated. A blend of clay with up to 20% dust yielded ceramics with limited metal contamination risk and may thus be used for structural ceramics production. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Electric arc furnace (EAF) dust is a waste generated in the EAF during the steel production process. Among different wastes, EAF dust represents one of the most hazardous, since it contains heavy metals such as Zn, Fe, Cr, Cd and Pb. The goal of the present work is to characterise the waste through chemical analysis, particle size distribution, X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive spectroscopy detection and thermal analysis. The waste sample is composed essentially of spherical particles and has a very small particle size and the majority of the identified elements were Fe, Zn, Ca, Cr, Mn, K and Si. The XRD has presented compounds such as ZnO, ZnFe2O4, Fe2O3, MnO, SiO2, FeFe2O4 and MnAl2O4. According to the thermal analysis results, up to 1000 degrees C the total weight loss was similar to 5%. The results of waste characterisation are very important to these further investigations.
Resumo:
Predatory mites identified as Neoseiulus paspalivorus DeLeon (Phytoseiidae) have been considered as agents for classical biological control of the coconut mite, Aceria guerreronis Keifer (Eriophyidae), in Africa and elsewhere. Preliminary identification of geographically distinct populations as belonging to the same species (N. paspalivorus) was based on their morphological similarity. However, laboratory studies recently conducted have shown large differences in feeding behaviors and biological characteristics among individuals collected from three geographic origins: Brazil (South America), Benin and Ghana (West Africa). As morphologically similar specimens do not necessarily belong to the same species, we evaluated under laboratory conditions, reproductive compatibility between the specimens from three geographic locations to ascertain their conspecificity. Morphological measurements were also made to determine whether there is a means of discriminating between them. Inter-population crosses showed complete reproductive isolation between the three geographic populations, but interpopulation discontinuities in morphometric characters were absent. These results indicate that the tested specimens are distinct biological entities despite morphological similarity. Further molecular genetic studies are therefore proposed, including screening for endosymbionts and assessment of genetic differentiation, to determine the cause of reproductive incompatibility and to clarify the taxonomic relationship between those populations.
Resumo:
The phytoseiid mites of the Dominican Republic are virtually unknown. In a survey conducted in areas of natural vegetation of that country, 23 species were collected, two of which, Phytoseius dominicensis Ferragut & Moraes sp. nov. and Typhloseiopsis adventitius Ferragut & Moraes sp. nov., are new to science. We report the species found in that survey, describe the two new species, and provide complementary morphological information about other species. To accommodate the new Typhloseiopsis De Leon species, a redefinition of Typhloseiopsis is proposed. A key for the separation of the species in this genus is provided.
Resumo:
- This paper reports the occurrence of five species of Rhodacaridae mites collected in the State of Sao Paulo, Brazil. One of these corresponds to a new genus and a new species, Binodacarus brasiliensis n. gen. n. sp.; two correspond to new species of kno
Resumo:
This is the ninth publication in a series on the taxonomy of phytoseiid mites of sub-Saharan Africa. Sixty-five phytoseiid species of the tribe Typhlodromini Wainstein, all of which are in the genus Typhlodromus Scheuten are reported in this paper (62 in the subgenus Anthoseius DeLeon and 3 in the subgenus Typhlodromus Scheuten). They refer to all species of this tribe known to occur in sub-Saharan Africa. Fifteen new species are described and 41 species are redescribed. Most of the reported species were collected in various habitats in southern Africa and in cassava habitats in tropical Africa. A key is included for the separation of these species.
Resumo:
Two new species of spider mites (Tetranychidae) found on Solanaceae in Peru are described: Tetranychus singularis n. sp. from Datura stramonium L. and T. amazonensis n. sp. from Solanum caricaefolium Rusby.
Resumo:
This paper reports the mites of the subfamilies Phytoseiinae and Typhlodrominae (Phytoseiidae) from Peru, providing descriptions of 2 new species, Phytoseius ortegae Guanilo and Moraes, n. sp. and Phytoseius poripherus Guanilo and Moraes, n. sp., and a taxonomic key to separate the species reported.
Resumo:
This is the eighth publication of a series on the determination of phytoseiid mites of sub-Saharan Africa. Twenty-three phytoseiid species of the tribe Paraseiulini Wainstein are reported in this paper. They refer to all species of this tribe known to occur in sub-Saharan Africa. Six of these species are described for the first time and 13 species are redescribed. Most of the reported species were collected in cassava habitats in tropical Africa and in other habitats in South Africa. A key is included to help in the separation of the species treated in this paper.
Resumo:
A new genus and new species of the mite family Eriophyidae (Phyllocoptinae), namely Cothrix erugata n. sp. et n. gen., is described from Heliconia stricta Huber (Heliconiaceae). In addition, one new genus and two new species of Diptilomiopidae, namely Rhyncadicrus asperulus n. sp. et n. gen. from banana, Musa acuminata Colla x Musa balbisiana Colla (genomic group AAB) (Musaceae) and Catarhinus granatus n. sp. from Heliconia bihai L., are described and illustrated. The mites were collected in the State of Pernambuco, Northeastern Brazil. All were vagrants on the lower leaf surfaces of their host plants and no visible damage symptoms were observed.
Resumo:
A new genus and two new species of eriophyoid mites in the family Diptilomiopidae associated with Spondias mombin L. (Anacardiaceae), namely Solivagus n. gen. alpha n. sp. and Davisella spondias n. sp., are described. In addition, a new species of Eriophyidae associated with Eugenia uniflora L. (Myrtaceae), namely Dichopelmus ibapitanga n. sp., is described and Aculus pitangae Boczek & Davis, also from E. uniflora, is redescribed including a description of the male, and its classification is discussed. All material studied was collected in the State of Pernambuco, Northeastern Brazil.
Resumo:
Two new Tetranychidae (Prostigmata) mites are described from Brazil Monoceronychus tchecensis n. sp., a bryobiine collected from weeping fingergrass, Eustachys distichophylla (Lag.) Nees (Poaceae), in the State of Rio Grande do Sul; and Oligonychus fileno n. sp., a tetranychine collected from grape, Vitis vinifera L. (Vitaceae), in the State of Minas Gerais. Monoceronychus tchecensis n. sp. is the second species in this genus described from South America. In addition to the description of these new species, the tetranychine Eotetranychus smithi Pritchard and Baker, 1955 was recorded for the first time for South America.
Resumo:
Along the aluminum refining process, alumina (Al(2)O(3)) constitutes the main source of dust. Although aluminum refinery workers present respiratory symptoms with lung functional changes, no conclusive data about lung function impairment after alumina exposure has been so far reported. We examined the pulmonary alterations of exposure to material collected in an aluminum refinery in Brazil. BALB/c mice were exposed in a whole-body chamber for 1 h to either saline (CTRL, n = 11) or to a suspension (in saline) of 8 mg/m(3) of the dust (ALUM, n = 11) both delivered by an ultrasonic nebulizer. Twenty-four hours after exposure lung mechanics were measured by the end-inflation method. Lungs were prepared for histology. ALUM showed significantly higher static elastance (34.61 +/- 5.76 cmH(2)O/mL), elastic component of viscoelasticity (8.16 +/- 1.20 cmH(2)O/mL), pressure used to overcome the resistive component of viscoelasticity (1.62 +/- 0.24 cmH(2)O), and total resistive pressure (2.21 +/- 0.49 cmH(2)O) than CTRL (27.95 +/- 3.63 cmH(2)O/mL, 6.12 +/- 0.99 cmH(2)O/mL, 1.23 +/- 0.19 cmH(2)O, and 1.68 +/- 0.23 cmH(2)O, respectively). ALUM also presented significantly higher fraction area of alveolar collapse (69.7 +/- 1.2%) and influx of polymorphonuclear cells (27.5 +/- 1.1%) in lung parenchyma than CTRL (27.2 +/- 1.1% and 14.6 +/- 0.7%, respectively). The composition analysis of the particulate matter showed high concentrations of aluminum. For the first time it was demonstrated in an experimental model that an acute exposure to dust collected in an aluminum producing facility impaired lung mechanics that could be associated with inflammation.
Resumo:
Modem production systems accommodate broody hens in high densities, leading to the accumulation of excrement under the cages. This substrate is excellent for the development of sinantropic flies. Thus, the accomplishment of surveys in these places becomes essential, in order to plan better strategies of control. The present work aimed at studying the entornofauna and the seasonality of the species of dipterous present in the Crisdan poultry house located in the Municipality of Sao Joao da Boa Vista, the State of Sao Paulo, Brazil. In the period of January of 2001 to December of 2002, 1,012,595 flies were captured using the ""jug-trap"". The species were identified: Drosophi-la repleta (Wollaston, 1858), Musca domestica (Linnaeus, 1758), Ophyra spp., Hennetria illucens (Linnaeus, 1758), Fannia canicularis (Linnaeus, 1761), Chrysomya megacephala (Fabricius, 1794), and Sepsidae. More frequently D. repleta and M. domestica had added 99.47% of the dipterous. Increased rainfall and the collection months influenced the sampling of dipterous (P < 0.05). Drosophila repleta was the most abundant species, representing 91% of all captured flies. However, this diptera did not develop at the surveyed site since immatures were not captured therein.
Resumo:
This study aimed at evaluating the thermal performance of a modular ceiling system for poultry houses. The reduced- and distorted-scale prototypes used ceiling modules made of reforested wood and were covered with recycled long-life package tiles. The following parameters were measured for 21 days: the internal surface temperature (ST), globe temperature and humidity index (WBGT), and radiant heat load (RHL). Measurements were made at times of highest heat load (11:00 am, 13:00 pm, and 03:00 pm). Collected data were analyzed by ""R"" statistics software. Means were compared by multiple comparison test (Tukey) and linear regression was performed, both at 5% significance level. The results showed that the prototype with the ceiling was more efficient to reduce internal tile surface temperature; however, this was not sufficient to provide a comfortable environment for broilers during the growout. Therefore, other techniques to provide proper cooling are required in addition to the ceiling