Healing of skin wounds in the African catfish Clarias gariepinus

The African catfish Clarias gariepinus was used as a model for wound healing and tissue regeneration in a scale-less fish. A temporal framework of histological and cell proliferation markers was established after wound induction in the dorsolateral cranial region, by removing the epidermal and dermal layers, including stratum adiposum (SA). Wound closure and epidermis formation was initiated within 3 h post-procedure (hpp) with migration and concomitant proliferation of epidermal cells from the wound borders. The wound was covered by this primary epidermal front 12 hpp and fusion of the opposing epidermal fronts occurred within 24 hpp. Attachment of the newly formed epidermal layer to the underlying dermis was observed 48 hpp concomitant with a second wave of cell proliferation at the wound edge. Normal epidermal thickness within the wound was achieved 72 hpp. Formation of a basement membrane occurred by 120 hpp with concomitant emergence of the SA from the wound borders. Wound healing in C. gariepinus skin involved closure of the wound and re-epithelization through cell migration with a single wave of early cell proliferation not documented in other species. Furthermore, covering of the wound by epithelium as well as the reappearance of the basement membrane and SA occurred sooner than in other fish species. (C) 2008 The Authors Journal compilation (C) 2008 The Fisheries Society of the British Isles.

Prevalence of Rickettsia species antibodies and Rickettsia species DNA in the blood of cats with and without fever

Rickettsia species antibodies have been detected in some cats but it is unknown whether infected cats develop clinical signs. The prevalence of Rickettsia species deoxyribonucleic acid (DNA) in blood from clinically ill cats has not been determined. The objective of this study was to determine if cats with fever (body temperature >= 102.5 degrees F [39.2 degrees C]) were more likely to have evidence of rickettsial infection than healthy, age-matched, control cats with a body temperature < 102.5 degrees F. Rickettsia species polymerase chain reaction (PCR) assays were performed to detect rickettsial DNA extracted from blood (71 paired samples), indirect immunofluorescence assays (IFA) were performed to detect serum antibodies against Rickettsia felis (90 paired samples) and Rickettsia rickettsii (91 paired samples), and the results between pairs were compared. All samples were negative for Rickettsia species DNA. More cats with fever were seropositive for R felis or R rickettsii than control cats, but results were not statistically significant. Results of this pilot study failed to show an association between Rickettsia species DNA or Rickettsia species antibodies and fever. (c) 2008 ESFM and AAFP. Published by Elsevier Ltd. All rights reserved.

Diagnoses of and illustrated key to the species of Ixodes Latreille, 1795 (Acari: Ixodidae) from Brazil

The current Brazilian Ixodes fauna is composed of the following eight species: I. amarali Fonseca, 1935; I. aragaoi Fonseca, 1935; I. auritulus Neumann, 1904; I. fuscipes Koch, 1844; I. loricatus Neumann, 1899; I. luciae S,nevet, 1940; I. paranaensis Barros-Battesti, Arzua, Pichorim & Keirans, 2003; and I. schulzei AragA o pound & Fonseca, 1951. Further studies are needed to establish the taxonomic status of I. serrafreirei Amorim, Gazeta, Bossi & Linhares, 2003, a recently proposed species based solely on the nymphal stage. We present an up-to-date key to adults of the currently valid Brazilian species of Ixodes based on scanning electron microscopy. The relationships between Brazilian and other Neotropical Ixodes are also discussed.

Ticks Infesting Wildlife Species in Northeastern Brazil With New Host and Locality Records

From September 2008 to March 2010, 397 ticks (315 larvae, 33 nymphs, 23 females, and 26 males) were collected from captive and free-living wildlife species in northeastern Brazil. Six tick species were identified, including Amblyomma auricularium (Conil) on Tamandua tetradactyla (L.),Amblyomma dubitalum Neumann on Hydrochaeris hydrochaeris (L.), Nectomys rattus (Pelzen) and T. tetradactyla, Amblyomma parvim A ragao on T. tatradactyla, Amblyomma rotundatum Koch on Boa constrictor L., Chelonoidis carbonaria (Spix), Kinosternon scorpioides (L.) and Rhinella jimi (Stevaux), Amblyomma cerium Koch on Bradypus variegatus Schinz, and Rhipicephalus sanguineus (Latreille) on Lycalopex vetulus (Lund). Nectomys rattus and T. tetradactyla are new hosts for A. dubitatum This study extends the known distribution of A. dubitatum in South America and provides evidence that its geographical range has been underestimated because of the lack of research. Four (A. dubitatum, A. parvum, A. rotundatum, and R. sanguineus) of six tick species identified in this study have previously been found on humans in South America, some of them being potentially involved in the transmission of pathogens of zoonotic concern.

Wide Dispersal and Possible Multiple Origins of Low-Copy-Number Plasmids in Rickettsia Species Associated with Blood-Feeding Arthropods

Plasmids are mobile genetic elements of bacteria that can impart important adaptive traits, such as increased virulence or antibiotic resistance. We report the existence of plasmids in Rickettsia (Rickettsiales; Rickettsiaceae) species, including Rickettsia akari, ""Candidatus Rickettsia amblyommii,"" R. bellii, R. rhipicephali, and REIS, the rickettsial endosymbiont of Ixodes scapularis. All of the rickettsiae were isolated from humans or North and South American ticks. R. parkeri isolates from both continents did not possess plasmids. We have now demonstrated plasmids in nearly all Rickettsia species that we have surveyed from three continents, which represent three of the four major proposed phylogenetic groups associated with blood-feeding arthropods. Gel-based evidence consistent with the existence of multiple plasmids in some species was confirmed by cloning plasmids with very different sequences from each of two ""Ca. Rickettsia amblyommii"" isolates. Phylogenetic analysis of rickettsial ParA plasmid partitioning proteins indicated multiple parA gene origins and plasmid incompatibility groups, consistent with possible multiple plasmid origins. Phylogenetic analysis of potentially host-adaptive rickettsial small heat shock proteins showed that hsp2 genes were plasmid specific and that hsp1 genes, found only on plasmids of ""Ca. Rickettsia amblyommii,"" R. felis, R. monacensis, and R. peacockii, were probably acquired independently of the hsp2 genes. Plasmid copy numbers in seven Rickettsia species ranged from 2.4 to 9.2 per chromosomal equivalent, as determined by real-time quantitative PCR. Plasmids may be of significance in rickettsial evolution and epidemiology by conferring genetic plasticity and host-adaptive traits via horizontal gene transfer that counteracts the reductive genome evolution typical of obligate intracellular bacteria.

Plasminogen Acquisition and Activation at the Surface of Leptospira Species Lead to Fibronectin Degradation

Pathogenic Leptospira species are the etiological agents of leptospirosis, a widespread disease of human and veterinary concern. In this study, we report that Leptospira species are capable of binding plasminogen (PLG) in vitro. The binding to the leptospiral surface was demonstrated by indirect immunofluorescence confocal microscopy with living bacteria. The PLG binding to the bacteria seems to occur via lysine residues because the ligation is inhibited by addition of the lysine analog 6-aminocaproic acid. Exogenously provided urokinase-type PLG activator (uPA) converts surface-bound PLG into enzymatically active plasmin, as evaluated by the reaction with the chromogenic plasmin substrate D-Val-Leu-Lys 4-nitroanilide dihydrochloridein. The PLG activation system on the surface of Leptospira is PLG dose dependent and does not cause injury to the organism, as cellular growth in culture was not impaired. The generation of active plasmin within Leptospira was observed with several nonvirulent high-passage strains and with the nonpathogenic saprophytic organism Leptospira biflexa. Statistically significant higher activation of plasmin was detected with a low-passage infectious strain of Leptospira. Plasmin-coated virulent Leptospira interrogans bacteria were capable of degrading purified extracellular matrix fibronectin. The breakdown of fibronectin was not observed with untreated bacteria. Our data provide for the first time in vitro evidence for the generation of active plasmin on the surface of Leptospira, a step that may contribute to leptospiral invasiveness.

Impacts of Animal Traffic on the Brazilian Amazon Parrots (Amazona species) Collection of the Quinzinho de Barros Municipal Zoological Park, Brazil, 1986-2007

Eleven species of Amazon parrots (genus Amazona) are known to occur in Brazil, and nest poaching and illegal traffic pose serious conservation threats to these species. When the illegal owners realize these animals are incompatible with their expectations and lifestyle, or when the police arrests traders and owners, these trafficked animals are often considered unfit for release and sent to local zoos and captive breeders. A retrospective survey of animal and necropsy records from 1986 to 2007 was used to evaluate the impacts of animal traffic on the population composition and mortality patterns of Amazon parrots at the Quinzinho de Barros Municipal Zoological Park, Sorocaba, Brazil. Data were obtained for 374 Amazon parrots of ten Brazilian species, and there was evidence that the studied population could be split into two major groups: a majority belonging to the Amazona aestiva species and a minority belonging to the remaining species. In comparison, the animals of the first group were more frequently admitted from traffic-related origins (98 vs. 75%), had a shorter lifespan (median 301 days vs. 848 days) and a higher mortality within the first year postadmission (54 vs. 37%), were less likely to receive expensive treatments, and were more frequently housed off-exhibit. On an average, parrots were found to have a short postadmission lifespan (median 356 days), with 92.5% of the birds dying within their first five years in captivity. The paper discusses the difficult dilemmas these incoming traffic-related animals pose to zoo management and official anti-traffic policies. Zoo Biol 29:600-614, 2010. (C) 2010 Wiley-Liss, Inc.

Redescription of the female, description of the male, and several new records of Amblyomma parkeri (Acari: Ixodidae), a South American tick species

The tick Amblyomma parkeri Fonseca and Arago was described in 1952, based on female and immature ticks collected in the states of So Paulo and Santa Catarina, Brazil. Thereafter, there has been no further report of A. parkeri, and the male has remained unknown. Herein, we examined ticks collected on porcupines from a locality in the state of So Paulo. Some of the ticks were identified as Amblyomma longirostre (Koch, 1844), whereas others as A. parkeri, including male specimens, for which we provide the first description. We also provide additional reports of A. parkeri after examining collections of A. longirostre and Amblyomma geayi Neumann, 1899 from different tick collections. Morphological evidence to support the original description of A. parkeri is presented, supported by molecular analyses of portions of the 16S rRNA and 12S rRNA mitochondrial genes. Morphological particularities to separate A. parkeri, A. longirostre, and A. geayi are provided.

The Effect of Framework Design on Fracture Resistance of Metal-Ceramic Implant-Supported Single Crowns

This study evaluated the effect of framework design on the fracture resistance of metal-ceramic implant-supported crowns. Screw-retained molar crowns with a screw access hole composed of metal or porcelain were compared to a cement-retained crown (control). For each group (n = 10), five crowns were subjected to dynamic loading (1,200,000 x 100 N x 2 Hz at 37 degrees C). Afterward, all specimens were loaded to failure using a universal testing machine. Significant differences could be established between the cement-and screw-retained groups (P <= .05), but no difference was found between the screw-retained groups and the specimens subjected to dynamic loading. Occlusal discontinuity of screw-retained crowns affects their resistance, and the metallic support on the screw access hole did not reinforce the crowns. Int J Prosthodont 2010;23:350-352.

Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses

The purpose of this in vitro study was to analyze the stress distribution on components of a mandibular-cantilevered implant-supported prosthesis with frameworks cast in cobalt-chromium (Co-Cr) or palladium-silver (Pd-Ag) alloys, according to the cantilever length. Frameworks were fabricated on (Co-Cr) and (Pd-Ag) alloys and screwed into standard abutments positioned on a master-cast containing five implant replicas. Two linear strain gauges were fixed on the mesial and distal aspects of each abutment to capture deformation. A vertical static load of 100 N was applied to the cantilever arm at the distances of 10, 15, and 20 mm from the center of the distal abutment and the absolute values of specific deformation were recorded. Different patterns of abutment deformation were observed according to the framework alloy. The Co-Cr alloy framework resulted in higher levels of abutment deformation than the silver-palladium alloy framework. Abutment deformation was higher with longer cantilever extensions. Physical properties of the alloys used for framework interfere with abutment deformations patterns. Excessively long cantilever extensions must be avoided. To cite this article:Jacques LB, Moura MS, Suedam V, Souza EAC, Rubo JH. Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses.Clin. Oral Impl. Res. 20, 2009; 737-741.doi: 10.1111/j.1600-0501.2009.01712.x.

Effect of abutment`s height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis

In cantilevered implant-supported complete prosthesis, the abutments` different heights represent different lever arms to which the abutments are subjected resulting in deformation of the components, which in turn transmit the load to the adjacent bone. The purpose of this in vitro study was to quantitatively assess the deformation of abutments of different heights in mandibular cantilevered implant-supported complete prosthesis. A circular steel master cast with five perforations containing implant replicas (O3.75 mm) was used. Two groups were formed according to the types of alloy of the framework (CoCr or PdAg). Three frameworks were made for each group to be tested with 4, 5.5 and 7 mm abutments. A 100 N load was applied at a point 15 mm distal to the center of the terminal implant. Readings of the deformations generated on the mesial and distal aspects of the abutments were obtained with the use of strain gauges. Deformation caused by tension and compression was observed in all specimens with the terminal abutment taking most of the load. An increase in deformation was observed in the terminal abutment as the height was increased. The use of an alloy of higher elastic modulus (CoCr) also caused the abutment deformation to increase. Abutment`s height and framework alloy influence the deformation of abutments of mandibular cantilevered implant-supported prosthesis. To cite this article:Suedam V, Capello SouzaEA, Moura MS, Jacques LB, Rubo JH. Effect of abutment`s height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis. Clin. Oral Impl. Res. 20, 2009; 196-200.doi: 10.1111/j.1600-0501.2008.01609.x.

Fatigue life and failure modes of crowns systems with a modified framework design

Objectives: To evaluate the effect of framework design on the fatigue life and failure modes of metal ceramic (MC, Ni-Cr alloy core, VMK 95 porcelain veneer), glass-infiltrated alumina (ICA, In-Ceram Alumina/VM7), and veneered yttria-stabilized tetragonal zirconia polycrystals (Y-TZP, IPSe.max ZirCAD/IPS e.max,) crowns. Methods: Sixty composite resin tooth replicas of a prepared maxillary first molar were produced to receive crowns systems of a standard (MCs, ICAs, and Y-TZPs, n = 10 each) or a modified framework design (MCm, ICAm, and Y-TZPm, n = 10 each). Fatigue loading was delivered with a spherical steel indenter (3.18 mm radius) on the center of the occlusal surface using r-ratio fatigue (30-300 N) until completion of 10(6) cycles or failure. Fatigue was interrupted every 125,000 cycles for damage evaluation. Weibull distribution fits and contour plots were used for examining differences between groups. Failure mode was evaluated by light polarized and SEM microscopy. Results: Weibull analysis showed the highest fatigue life for MC crowns regardless of framework design. No significant difference (confidence bound overlaps) was observed between ICA and Y-TZP with or without framework design modification. Y-TZPm crowns presented fatigue life in the range of MC crowns. No porcelain veneer fracture was observed in the MC groups, whereas ICAs presented bulk fracture and ICAm failed mainly through the veneer. Y-TZP crowns failed through chipping within the veneer, without core fractures. Conclusions: Framework design modification did not improve the fatigue life of the crown systems investigated. Y-TZPm crowns showed comparable fatigue life to MC groups. Failure mode varied according to crown system. (C) 2010 Elsevier Ltd. All rights reserved.

Effect of framework design on crown failure

This study evaluated the effect of core-design modification on the characteristic strength and failure modes of glass-infiltrated alumina (In-Ceram) (ICA) compared with porcelain fused to metal (PFM). Premolar crowns of a standard design (PFMs and ICAs) or with a modified framework design (PFMm and ICAm) were fabricated, cemented on dies, and loaded until failure. The crowns were loaded at 0.5 mm min(-1) using a 6.25 mm tungsten-carbide ball at the central fossa. Fracture load values were recorded and fracture analysis of representative samples were evaluated using scanning electron microscopy. Probability Weibull curves with two-sided 90% confidence limits were calculated for each group and a contour plot of the characteristic strength was obtained. Design modification showed an increase in the characteristic strength of the PFMm and ICAm groups, with PFM groups showing higher characteristic strength than ICA groups. The PFMm group showed the highest characteristic strength among all groups. Fracture modes of PFMs and of PFMm frequently reached the core interface at the lingual cusp, whereas ICA exhibited bulk fracture through the alumina core. Core-design modification significantly improved the characteristic strength for PFM and for ICA. The PFM groups demonstrated higher characteristic strength than both ICA groups combined.

Determination of para-Chloroaniline and Reactive Oxygen Species in Chlorhexidine and Chlorhexidine Associated with Calcium Hydroxide

The aim of this study was to determine whether para-chloroaniline (PCA) and/or reactive oxygen species (ROS) are generated by chlorhexidine (CHX) alone or after CHX is mixed with calcium hydroxide at different time points. Mass spectrometry was performed to detect PCA in samples of 0.2% CHX and Ca(OH)2 mixed with 0.2% CHX. High-performance liquid chromatography was used to confirm the presence of CHX in the mixture with Ca(OH)2. The samples were analyzed immediately after mixing and after 7 and 14 days. During the intervals of the experiment, the samples were maintained at 36.5 degrees C and 95% relative humidity. PCA was detected in the 0.2% CHX solution after 14 days. The mixture of CHX with Ca(CH)2 liberated ROS at all time points, but no traces of CHX were present in the mixture as a result of immediate degradation of the CHX. (J Endod 2008;34:1508-1514)