Performance of an adaptive homodyne receiver in the presence of multipath, Rayleigh-fading and time-varying quadrature errors

In this paper, we carry out a detailed performance analysis of the blind source separation based I/Q corrector operating at the baseband. Performance of the digital I/Q corrector is evaluated not only under time-varying phase and gain errors but also in the presence of multipath and Rayleigh fading channels. Performance under low-SNR and different modulation formats and constellation sizes is also evaluated. What is more, BER improvement after correction is illustrated. The results indicate that the adaptive algorithm offers adequate performance for most communication applications hence, reducing the matching requirements of the analog front-end enabling higher levels of integration.

Automatic deployment of interoperable legacy code services

The Grid Execution Management for Legacy Code Architecture (GEMLCA) enables exposing legacy applications as Grid services without re-engineering the code, or even requiring access to the source files. The integration of current GT3 and GT4 based GEMLCA implementations with the P-GRADE Grid portal allows the creation, execution and visualisation of complex Grid workflows composed of legacy and nonlegacy components. However, the deployment of legacy codes and mapping their execution to Grid resources is currently done manually. This paper outlines how GEMLCA can be extended with automatic service deployment, brokering, and information system support. A conceptual architecture for an Automatic Deployment Service (ADS) and for an x-Service Interoperability Layer (XSILA) are introduced explaining how these mechanisms support desired features in future releases of GEMLCA.

Dual-tracking multi-constellation GNSS front-end for high-performance receiver applications

This paper presents the design and implementation of a dual–tracking Radio Frequency (RF) front–end for a multi–constellation Global Navigation Satellite Systems (GNSS) receiver. The RF frond–end is based on the direct RF conversion architecture, which employs sub–Nyquist sampling (also known as subsampling) at RF. The dual–tracking RF front–end is composed of a few RF components that are duplicated to form the two RF channels. Employing a dual–channel Analogue–to–Digital Converter (ADC) enables synchronisation of the RF channels and minimises the errors resulting from the differences in the satellite clocks and the propagation delay between the two RF channels. The digitised GNSS signals are processed by two separate acquisition and tracking engines that are driven by the front–end’s master clock. This setup provides two synchronised receivers that are integrated onto one piece of hardware. The hardware is intended to be used for research applications such as multipath mitigation, scintillation assessment, and advanced satellite clock and spatial frame transformation modelling.

Supporting dynamic parameter sweep applications in workflows: lessons learnt from the CancerGrid project

A vast majority of scientific grid applications are either parameter sweep applications or a significant subpart of these applications belong to class of parameter sweep activities. The paper describes a new graphical workflow language in which any node of the DAG-based workflow can be a parameter sweep node and the execution of these nodes are transparently executed either in service grids or in desktop grids depending on the computational complexity of the workflow node. The new concept is supported by the CancerGrid portal that has been established for a chemist community.

Feminist epistemology meets the masculinity of marketing and consumer knowledge: a contemporary rendering of a decade-long debate

In this paper I outline possibilities for, and issues arising from, opposition towards the dominant ideologies and practices of marketing knowledge (Hirschman 1993) through an engagement with feminist epistemology (Longino 1991, Harding 1987). Feminist epistemology is a political branch of naturalised epistemology (Quine 1969) primarily concerned with critique of constructions of gender, gender norms and gendered interests within the production of knowledge (Anderson 1995) and with theorising, grounding and legitimating feminist knowledge making practices (Harding 1987). It is most often associated with the feminist critique of science, and with feminist science and technology studies (Haraway 1987, Wajman 1997). Feminist epistemology asks the question, ‘what is the nature of the feminist critical project as a way of knowing?’ (McLennan 1995:392). This paper outlines the basis of the feminist critique of knowledge generally, and as applied to marketing knowledge, offers description of the three main epistemological approaches to this question and suggestions for their application in practice. The paper progresses important work by consumer behaviour theorists (Bristor and Fischer 1993, Hirschman 1993) on the potentials of feminist ways of knowing for marketing and consumer behaviour by moving beyond the tripartite of feminist approaches outlined, and extending the discussion to take into account the development of situated knowledges theory (Haraway 1989, 1997), which has become so important in the decade since these papers were written. It joins ongoing conversations in consumer behaviour and marketing that share similar feminist concerns (Catterall et al 1997, 2000, 2005, Bettany and Woodruffe Burton 1999, 2005, and Hogg et al 1999, 2000) but in this contribution it takes a slightly tangential approach, seeing marketing knowledge in terms of its epistemic culture by using a model of masculinity in academic cultures from feminist theory (Wagner 1994) to help conceptualise it as such. The dominant masculine ideology of marketing knowledge both in execution (Penaloza 1994, Bristor and Fischer 1994, Fischer and Bristor 1993, Woodruffe 1996), and values (Hirschman 1993, Brown 2000, Desmond 1997) has been well documented over the past fifteen years. However, although the basis of this, how is it manifested and how a feminist informed marketing knowledge could be achieved, have been addressed somewhat in the literature (Bristor and Fischer 1993, Hogg, Bettany and Long 2000) an updated rendering is necessary which focuses specifically on epistemology and situates this discussion within a cultural framework. To do this I use the notions of cultural masculinity in academic disciplines developed by Wagner (1994) of ‘organisational egocentrism’, ‘fake collectivity’ and ‘de realisation’. With these, I raise important and specific issues around the notion of the masculinity of marketing knowledge, and then present an outline of feminist epistemologies to illustrate how different feminist approaches to knowledge would address these concerns.

Sharing science gateway artefacts through repositories

Researchers want to run scientific experiments focusing on their disciplines. They do not want to know how and where the experiments are executed. Science gateways hide details by coordinating the execution of experiments using different infrastructures and workflow systems. ER-flow/SHIWA and SCI-BUS project developed repositories to share artefacts such as applications, portlets, workflows, etc. inside and among research communities. Sharing artefacts in re-positories enable gateway developers to reuse them when building a new gateway and/or creating a new application.

Towards an Application-Specific Thermal Energy Model of Current Processors

Recent developments of high-end processors recognize temperature monitoring and tuning as one of the main challenges towards achieving higher performance given the growing power and temperature constraints. To address this challenge, one needs both suitable thermal energy abstraction and corresponding instrumentation. Our model is based on application-specific parameters such as power consumption, execution time, and asymptotic temperature as well as hardware-specific parameters such as half time for thermal rise or fall. As observed with our out-of-band instrumentation and monitoring infrastructure, the temperature changes follow a relatively slow capacitor-style charge-discharge process. Therefore, we use the lumped thermal model that initiates an exponential process whenever there is a change in processor’s power consumption. Initial experiments with two codes – Firestarter and Nekbone – validate our thermal energy model and demonstrate its use for analyzing and potentially improving the application-specific balance between temperature, power, and performance.

Business Process Modelling based on formal temporal theory with an application to hospital patient flows

Existing Workflow Management Systems (WFMSs) follow a pragmatic approach. They often use a proprietary modelling language with an intuitive graphical layout. However the underlying semantics lack a formal foundation. As a consequence, analysis issues, such as proving correctness i.e. soundness and completeness, and reliable execution are not supported at design level. This project will be using an applied ontology approach by formally defining key terms such as process, sub-process, action/task based on formal temporal theory. Current business process modelling (BPM) standards such as Business Process Modelling Notation (BPMN) and Unified Modelling Language (UML) Activity Diagram (AD) model their constructs with no logical basis. This investigation will contribute to the research and industry by providing a framework that will provide grounding for BPM to reason and represent a correct business process (BP). This is missing in the current BPM domain, and may result in reduction of the design costs and avert the burden of redundant terms used by the current standards. A graphical tool will be introduced which will implement the formal ontology defined in the framework. This new tool can be used both as a modelling tool and at the same time will serve the purpose of validating the model. This research will also fill the existing gap by providing a unified graphical representation to represent a BP in a logically consistent manner for the mainstream modelling standards in the fields of business and IT. A case study will be conducted to analyse a catalogue of existing ‘patient pathways’ i.e. processes, of King’s College Hospital NHS Trust including current performance statistics. Following the application of the framework, a mapping will be conducted, and new performance statistics will be collected. A cost/benefits analysis report will be produced comparing the results of the two approaches.

A general framework for Business Process Modelling (BPM) based on Formal Temporal Theory with an application to Hospital Patient flows

Existing Workflow Management Systems (WFMSs) follow a pragmatic approach. They often use a proprietary modelling language with an intuitive graphical layout. However the underlying semantics lack a formal foundation. As a consequence, analysis issues, such as proving correctness i.e. soundness and completeness, and reliable execution are not supported at design level. This project will be using an applied ontology approach by formally defining key terms such as process, sub-process, action/task based on formal temporal theory. Current business process modelling (BPM) standards such as Business Process Modelling Notation (BPMN) and Unified Modelling Language (UML) Activity Diagram (AD) model their constructs with no logical basis. This investigation will contribute to the research and industry by providing a framework that will provide grounding for BPM to reason and represent a correct business process (BP). This is missing in the current BPM domain, and may result in reduction of the design costs and avert the burden of redundant terms used by the current standards. A graphical tool will be introduced which will implement the formal ontology defined in the framework. This new tool can be used both as a modelling tool and at the same time will serve the purpose of validating the model. This research will also fill the existing gap by providing a unified graphical representation to represent a BP in a logically consistent manner for the mainstream modelling standards in the fields of business and IT. A case study will be conducted to analyse a catalogue of existing ‘patient pathways’ i.e. processes, of King’s College Hospital NHS Trust including current performance statistics. Following the application of the framework, a mapping will be conducted, and new performance statistics will be collected. A cost/benefits analysis report will be produced comparing the results of the two approaches.