Compact dielectric-filled waveguide filters and diplexers

This paper presents electromagnetic simulations of dielectric-filled rectangular waveguide bandpass filter structures with microstrip to waveguide transitions as well as a diplexer based on such filters for modern wireless systems. The two bandpass filters have been designed and simulated at centre frequencies of 11.85 and 14.25 GHz, respectively. A significant size reduction is achieved through dielectric filling.

Compact high linearity switchable dual-mode microstrip bandpass filters

A compact highly linear microstrip dual-mode electronically switchable filter is presented. The key characteristics of the dual-mode switchable filter are investigated and described. A second order filter design procedure is outlined to facilitate the realisation of Butterworth and Chebyshev functions. The proposed filter was built and tested with NXP pin diode model BAP65-03. The measured and simulated results are in good agreement. The measured insertion loss in the ON state was 3.0 dB the isolation in the OFF state was 45 dB at the centre frequency. An evaluation of filter distortion is presented for digitally modulated 16 QAM and QPSK signals.

Compact filters using metal-dielectric inserts

A novel filter based on e-plane metal-dielectric insert in rectangular waveguide is proposed. Properties of the structure containing metallic septa, C- and I-shaped resonators placed in waveguide are investigated. Pseudo-elliptic cross-coupled filter with direct source-load coupling is designed, simulated and fabricated. Experimental results are presented to prove feasibility of the filter. Significant size reduction is achieved.

Ultra compact pseudo-elliptic inline waveguide bandpass filters using bypass coupling

This paper presents an ultra compact waveguide bandpass filter that exhibits a pseudo-elliptic response. The transmission zero created in the upper stopband to form a rapid roll off is produced through a bypass coupling with higher order modes. A 3rd order filter is designed at the centre frequency of 9.4 GHz with a 5.3% fractional bandwidth. The proposed structure's size is 38% smaller than one of a 3rd order E-plane extracted pole filter with comparable response. Additionally, this configuration allows larger span of different bandwidths. The filter has been fabricated and tested using E-plane waveguide technology, which has benefits of being inexpensive and having mass producible capabilities. Measurements of such a fabricated filter validate the simulated results.

Ultra compact inline E-plane waveguide extracted pole bandpass filters

This letter presents an ultra compact extracted pole E-plane filter. The proposed structure can achieve up to 65% size reduction in comparison with a standard extracted pole filter designed at 9.5 GHz centre frequency with a 3% fractional bandwidth. The filter has been fabricated and tested using E-plane waveguide technology. Measurements on a fabricated filter confirm the accuracy of the design method.

Compact tunable bandstop filters using defected microstrip structure for multi-standard wireless systems

A novel compact tunable bandstop filter using Defected Microstrip Structure (DMS) is presented in this paper. The structure utilizes a modified T shaped DMS which helps in miniaturization of the filter. To verify the concept, one such filter was simulated, designed, fabricated and tested. Measurements on a fabricated tunable filter confirm the accuracy of the design procedure. The tuning range of 20% is achieved, ranging from 2.26 GHz to 2.747 GHz. Tuning is achieved by using NXP BB179 varactor diode. A nonlinear distortion evaluation in a tunable filter was experimentally verified. Experimental verification shows the filter is highly linear.

Strategies of newsroom convergence: comparing UK and Chinese newspaper groups

This research examines media integration in China, choosing two Chinese newspaper groups as cases for comparative study. The study analyses the convergence strategies of these Chinese groups by reference to an Role Model of convergence developed from a literature review of studies of cases of media convergence in the UK – in particular the Guardian (GNM), Telegraph Media Group (TMG), the Daily Mail and the Times. UK cases serve to establish the characteristics, causes and consequences of different forms of convergence and formulate a model of convergence. The model will specify the levels of newsroom convergence and the sub-units of analysis which will be used to collect empirical data from Chinese News Organisations and compare their strategies, practices and results with the UK experience. The literature review shows that there is a need for more comparative studies of media convergence strategy in general, and particularly in relation to Chinese media. Therefore, the study will address a gap in the understanding of media convergence in China. For this reason, my innovations have three folds: Firstly, to develop a new and comprehensive model of media convergence and a detailed understanding of the reasons why media companies pursue differing strategies in managing convergence across a wide range of units of analysis. Secondly, this study tries to compare the multimedia strategies of media groups under radically different political systems. Since, there is no standard research method or systematic theoretical framework for the study of Newsroom Convergence, this study develops an integrated perspective. The research will use the triangulation analysis of textual, field observation and interviews to explain systematically what was the newsroom structure like in the past and how did the copy flow change and why. Finally, this case study of media groups can provide an industrial model or framework for the other media groups.