Analysis and compensation of RF impairments for next generation multimode GNSS receivers

Global navigation satellite system (GNSS) receivers require solutions that are compact, cheap and low-power, in order to enable their widespread proliferation into consumer products. Furthermore, interoperability of GNSS with non-navigation systems, especially communication systems will gain importance in providing the value added services in a variety of sectors, providing seamless quality of service for users. An important step into the market for Galileo is the timely availability of these hybrid multi-mode terminals for consumer applications. However, receiver architectures that are amenable to high-levels of integration will inevitably suffer from RF impairments hindering their easy widespread use in commercial products. This paper studies and presents analytical evaluations of the performance degradation due to the RF impairments and develops algorithms that can compensate for them in the DSP domain at the base band with complexity-reduced hardware overheads, hence, paving the way for low-power, highly integrated multi-mode GNSS receivers.

A low complexity cross-correlation interference mitigation technique for GNSS

The finite length Gold codes used in satellite navigation systems limit their dynamic range, resulting in the introduction of unwanted peaks that can mask out signals of interest. In this paper, a novel cross-correlation interference mitigation technique dealing with this issue is introduced. A brief overview of the multiple access interference problem inherent in satellite navigation systems using the code division multiple access technique is followed by the details of the proposed method. Simulation case studies and analyses of the results detailing weak signal scenarios, carried out entirely using the Global Navigation System Scope, are presented. A comparison of the results is given in the conclusions section along with remarks on the performance of the proposed method and future work to be carried out.

The effect of clock jitter on the performance of continuous-time delta-sigma ADC for GNSS signals

Next generation Global Navigation Satellite System (GNSS) receivers will operate in multiple navigation bands. An efficient way to achieve this with lower power and cost is to employ BandPass Sampling (BPS); nevertheless, the sampling operation injects large amounts of jitter noise, which degrades the performance of the receiver. Continuous–Time (CT) Delta–Sigma (ΔΣ) modulators are capable of suppressing this noise but the impact of clock jitter at the output of the Digital– to–Analog Converter (DAC) in the feedback path of the modulator should be taken into account. This paper presents an analytical approach for describing clock jitter in GNSS receivers when a CT–ΔΣ modulator is utilized for Analog–to–Digital Conversion (ADC). The validity of the presented approach is verified through time–domain simulations using a behavioural model of the fourth–order CT–ΔΣ modulator with 1–bit NRZ DAC feedback pulse.

Dual-tracking multi-constellation GNSS front-end for high-performance receiver applications

This paper presents the design and implementation of a dual–tracking Radio Frequency (RF) front–end for a multi–constellation Global Navigation Satellite Systems (GNSS) receiver. The RF frond–end is based on the direct RF conversion architecture, which employs sub–Nyquist sampling (also known as subsampling) at RF. The dual–tracking RF front–end is composed of a few RF components that are duplicated to form the two RF channels. Employing a dual–channel Analogue–to–Digital Converter (ADC) enables synchronisation of the RF channels and minimises the errors resulting from the differences in the satellite clocks and the propagation delay between the two RF channels. The digitised GNSS signals are processed by two separate acquisition and tracking engines that are driven by the front–end’s master clock. This setup provides two synchronised receivers that are integrated onto one piece of hardware. The hardware is intended to be used for research applications such as multipath mitigation, scintillation assessment, and advanced satellite clock and spatial frame transformation modelling.

Nonlinear Phase Filtering Effects on GNSS Receiver Positioning Accuracy

This paper demonstrates nonlinear phase filtering effects on GNSS receiver accuracy. Using a nonlinear phase filter in a GNSS receiver can change the pseudorange estimation up to 250 metres which introduces an error in the overall positioning calculation. Paper shows the study of the nonlinear phase filtering effects on the pseudorange estimation and demonstrates how it can be compensated with minimal hardware usage.