Energy efficiency and greenhouse gas emissions of different supply chains: a comparison of French, UK and Belgian cases

Freight transportation system is critical to economic activity but it carries significant environmental costs, notably GHG emissions and climate change : energy use and corresponding CO2 emissions is increasing faster in freight transport than in other sectors and this increase is primarily the result of increased trade. This paper compares the transport activities, associated energy consumption and CO2 emissions of different supply chains for a range of products in three countries: Belgium, France and United Kingdom. Among the products considered are furniture and ‘fruits & vegetables’. For each of these products, different supply chains, involving more or less transport activity and associated energy consumption are analysed in each country. The comparison highlights some of the main factors that influence GHG emissions for different supply chains and illustrates how they vary according to product and country of final distribution. In more detail, the paper addresses the main differences between the supply chains of these products namely, the origin of their sourcing, the logistical organisation between production and retail and different types of retail outlet. The origin of the sourcing impact is mainly related to distance. The impact of the logistical organisation between raw material and retail on GHG emissions is linked to the mode and vehicle choice and to the load factor. As for retail, the consumer trip emissions, between his home and the retail outlet, are also an important part of the whole supply chain emissions. It is worthwhile to notice that our goal in this project is to consider the whole supply chain, from production to consumption. Therefore a particular focus is put on the mobility behaviours of consumers purchasing the studied products during their shopping and dropping back home activities related to these products. Especially a web based survey has been conducted and the gathered results offer an opportunity for drawing a more detailed picture of the associated CO2 emissions. This paper uses the results of an ongoing research on supply chain energy efficiency, funded by ADEME (the French Energy Agency) through the French program on transport research (PREDIT). This research is based on a comprehensive review of the various approaches to quantifying the environmental impacts of supply chains together with data collection from a range of organisations including manufacturers, retailers and transport companies. We will first present the developed methodologies, then the results corresponding to each studied product will be described. A discussion of the potential application of the research approach to the wider debate about the environmental impact of freight transport and the scope for GHG emissions reduction targets to be achieved will be included.

Energy efficiency and greenhouse gas emissions of different supply chains: a comparison of French, UK and Belgian cases

Freight transportation system is critical to economic activity but it carries significant environmental costs, notably GHG emissions and climate change : energy use and corresponding CO2 emissions is increasing faster in freight transport than in other sectors and this increase is primarily the result of increased trade. This paper compares the transport activities, associated energy consumption and CO2 emissions of different supply chains for a range of products in three countries: Belgium, France and United Kingdom. Among the products considered are furniture and fruits & vegetables. For each of these products, different supply chains, involving more or less transport activity and associated energy consumption are analysed in each country. The comparison highlights some of the main factors that influence GHG emissions for different supply chains and illustrates how they vary according to product and country of final distribution. In more detail, the paper addresses the main differences between the supply chains of these products namely, the origin of their sourcing, the logistical organisation between production and retail and different types of retail outlet. The origin of the sourcing impact is mainly related to distance. The impact of the logistical organisation between raw material and retail on GHG emissions is linked to the mode and vehicle choice and to the load factor. As for retail, the consumer trip emissions, between his home and the retail outlet, are also an important part of the whole supply chain emissions. It is worthwhile to notice that our goal in this project is to consider the whole supply chain, from production to consumption. Therefore a particular focus is put on the mobility behaviours of consumers purchasing the studied products during their shopping and dropping back home activities related to these products. Especially a web based survey has been conducted and the gathered results offer an opportunity for drawing a more detailed picture of the associated CO2 emissions. This paper uses the results of an ongoing research on supply chain energy efficiency, funded by ADEME (the French Energy Agency) through the French program on transport research (PREDIT). This research is based on a comprehensive review of the various approaches to quantifying the environmental impacts of supply chains together with data collection from a range of organisations including manufacturers, retailers and transport companies. We will first present the developed methodologies, then the results corresponding to each studied product will be described. A discussion of the potential application of the research approach to the wider debate about the environmental impact of freight transport and the scope for GHG emissions reduction targets to be achieved will be included.

Product innovation and the costs of energy-using product policies

Energy-using Products (EuPs) contribute significantly to the United Kingdom’s CO2 emissions, both in the domestic and non-domestic sectors. Policies that encourage the use of more energy efficient products (such as minimum performance standards, energy labelling, enhanced capital allowances, etc.) can therefore generate significant reductions in overall energy consumption and hence, CO2 emissions. While these policies can impose costs on the producers and consumers of these products in the short run, the process of product innovation may reduce the magnitude of these costs over time. If this is the case, then it is important that the impacts of innovation are taken into account in policy impact assessments. Previous studies have found considerable evidence of experience curve effects for EuP categories (e.g. refrigerators, televisions, etc.), with learning rates of around 20% for both average unit costs and average prices; similar to those found for energy supply technologies. Moreover, the decline in production costs has been accompanied by a significant improvement in the energy efficiency of EuPs. Building on these findings and the results of an empirical analysis of UK sales data for a range of product categories, this paper sets out an analytic framework for assessing the impact of EuP policy interventions on consumers and producers which takes explicit account of the product innovation process. The impact of the product innovation process can be seen in the continuous evolution of the energy class profiles of EuP categories over time; with higher energy classes (e.g. A, A+, etc.) entering the market and increasing their market share, while lower classes (e.g. E, F, etc.) lose share and then leave the market. Furthermore, the average prices of individual energy classes have declined over their respective lives, while new classes have typically entered the market at successively lower “launch prices”. Based on two underlying assumptions regarding the shapes of the “lifecycle profiles” for the relative sales and the relative average mark-ups of individual energy classes, a simple simulation model is developed that can replicate the observed market dynamics in terms of the evolution of market shares and average prices. The model is used to assess the effect of two alternative EuP policy interventions – a minimum energy performance standard and an energy-labelling scheme – on the average unit cost trajectory and the average price trajectory of a typical EuP category, and hence the financial impacts on producers and consumers.

The Data of Things: Strategies, Patterns and Practice of Cloud-based Participatory Sensing

The broad capabilities of current mobile devices have paved the way for Mobile Crowd Sensing (MCS) applications. The success of this emerging paradigm strongly depends on the quality of received data which, in turn, is contingent to mass user participation; the broader the participation, the more useful these systems become. However, there is an ongoing trend that tries to integrate MCS applications with emerging computing paradigms such as cloud computing. The intuition is that such a transition can significantly improve the overall efficiency while at the same time it offers stronger security and privacy-preserving mechanisms for the end-user. In this position paper, we dwell on the underpinnings of incorporating cloud computing techniques to facilitate the vast amount of data collected in MCS applications. That is, we present a list of core system, security and privacy requirements that must be met if such a transition is to be successful. To this end, we first address several competing challenges not previously considered in the literature such as the scarce energy resources of battery-powered mobile devices as well as their limited computational resources that they often prevent the use of computationally heavy cryptographic operations and thus offering limited security services to the end-user. Finally, we present a use case scenario as a comprehensive example. Based on our findings, we posit open issues and challenges, and discuss possible ways to address them, so that security and privacy do not hinder the migration of MCS systems to the cloud.

Detailed analysis of data from heat pumps installed via the Renewable Heat Premium Payment Scheme

The RHPP policy provided subsidies for private householders, Registered social landlords and communities to install renewable heat measures in residential properties. Eligible measures included air and ground-source heat pumps, biomass boilers and solar thermal. Around 18,000 heat pumps were installed via this scheme. DECC funded a detailed monitoring campaign, which covered 700 heat pumps (around 4% of the total). The aim of this monitoring campaign was to assess the efficiencies of the heat pumps and to estimate the carbon and bill savings and amount of renewable heat generated. Data was collected from 31/10/2013 to 31/03/2015. This report represents the analysis of this data and represents the most complete and reliable data in-situ residential heat pump performance in the UK to date.