Controlled delivery of gentamicin using poly(3-hydroxybutyrate) microspheres

Poly(3-hydroxybutyrate), P(3HB), produced from Bacillus cereus SPV using a simple glucose feeding strategy was used to fabricate P(3HB) microspheres using a solid-in-oil-water (s/o/w) technique. For this study, several parameters such as polymer concentration, surfactant and stirring rates were varied in order to determine their effect on microsphere characteristics. The average size of the microspheres was in the range of 2 μm to 1.54 μm with specific surface areas varying between 9.60 m(2)/g and 6.05 m(2)/g. Low stirring speed of 300 rpm produced slightly larger microspheres when compared to the smaller microspheres produced when the stirring velocity was increased to 800 rpm. The surface morphology of the microspheres after solvent evaporation appeared smooth when observed under SEM. Gentamicin was encapsulated within these P(3HB) microspheres and the release kinetics from the microspheres exhibiting the highest encapsulation efficiency, which was 48%, was investigated. The in vitro release of gentamicin was bimodal, an initial burst release was observed followed by a diffusion mediated sustained release. Biodegradable P(3HB) microspheres developed in this research has shown high potential to be used in various biomedical applications.

Characterization of two immunomodulating homogalacturonan pectins from green tea

Two natural homogalacturonan (HG) pectins (MW ca. 20 kDa) were isolated from green tea based on their immunomodulatory activity. The crude tea polysaccharides (TPS1 and TPS2) were obtained from green tea leaves by hot water extraction and followed by 40% and 70% ethanol precipitation, respectively. Two homogenous water soluble polysaccharides (TPS1-2a and TPS1-2b) were obtained from TPS1 after purification with gel permeation, which gave a higher phagocytic effect than TPS2. A combination of composition, methylation and configuration analyses, as well as NMR (nuclear magnetic resonance) spectroscopy revealed that TPS1-2a and TPS1-2b were homogalacturonan (HG) pectins consisting of a backbone of 1,4-linked α-d-galacturonic acid (GalA) residues with 28.4% and 26.1% of carboxyl groups as methyl ester, respectively. The immunological assay results demonstrated that TPS1-2, which consisted mainly of HG pectins, showed phagocytosis-enhancing activity in HL-60 cells.

Intake of dairy products in relation to periodontitis in older Danish adults

This cross-sectional study investigates whether calcium intakes from dairy and non-dairy sources, and absolute intakes of various dairy products, are associated with periodontitis. The calcium intake (mg/day) of 135 older Danish adults was estimated by a diet history interview and divided into dairy and non-dairy calcium. Dairy food intake (g/day) was classified into four groups: milk, cheese, fermented foods and other foods. Periodontitis was defined as the number of teeth with attachment loss ≥3 mm. Intakes of total dairy calcium (Incidence-rate ratio (IRR) = 0.97; p = 0.021), calcium from milk (IRR = 0.97; p = 0.025) and fermented foods (IRR = 0.96; p = 0.03) were inversely and significantly associated with periodontitis after adjustment for age, gender, education, sucrose intake, alcohol consumption, smoking, physical activity, vitamin D intake, heart disease, visits to the dentist, use of dental floss and bleeding on probing, but non-dairy calcium, calcium from cheese and other types of dairy food intakes were not. Total dairy foods (IRR = 0.96; p = 0.003), milk (IRR = 0.96; p = 0.028) and fermented foods intakes (IRR = 0.97; p = 0.029) were associated with reduced risk of periodontitis, but cheese and other dairy foods intakes were not. These results suggest that dairy calcium, particularly from milk and fermented products, may protect against periodontitis. Prospective studies are required to confirm these findings.

Wind resource mapping using landscape roughness and spatial interpolation methods

Energy saving, reduction of greenhouse gasses and increased use of renewables are key policies to achieve the European 2020 targets. In particular, distributed renewable energy sources, integrated with spatial planning, require novel methods to optimise supply and demand. In contrast with large scale wind turbines, small and medium wind turbines (SMWTs) have a less extensive impact on the use of space and the power system, nevertheless, a significant spatial footprint is still present and the need for good spatial planning is a necessity. To optimise the location of SMWTs, detailed knowledge of the spatial distribution of the average wind speed is essential, hence, in this article, wind measurements and roughness maps were used to create a reliable annual mean wind speed map of Flanders at 10 m above the Earth’s surface. Via roughness transformation, the surface wind speed measurements were converted into meso- and macroscale wind data. The data were further processed by using seven different spatial interpolation methods in order to develop regional wind resource maps. Based on statistical analysis, it was found that the transformation into mesoscale wind, in combination with Simple Kriging, was the most adequate method to create reliable maps for decision-making on optimal production sites for SMWTs in Flanders.

Wind Resource Mapping Using Landscape Roughness and Spatial Interpolation Methods

Energy saving, reduction of greenhouse gasses and increased use of renewables are key policies to achieve the European 2020 targets. In particular, distributed renewable energy sources, integrated with spatial planning, require novel methods to optimise supply and demand. In contrast with large scale wind turbines, small and medium wind turbines (SMWTs) have a less extensive impact on the use of space and the power system, nevertheless, a significant spatial footprint is still present and the need for good spatial planning is a necessity. To optimise the location of SMWTs, detailed knowledge of the spatial distribution of the average wind speed is essential, hence, in this article, wind measurements and roughness maps were used to create a reliable annual mean wind speed map of Flanders at 10 m above the Earth’s surface. Via roughness transformation, the surface wind speed measurements were converted into meso- and macroscale wind data. The data were further processed by using seven different spatial interpolation methods in order to develop regional wind resource maps. Based on statistical analysis, it was found that the transformation into mesoscale wind, in combination with Simple Kriging, was the most adequate method to create reliable maps for decision-making on optimal production sites for SMWTs in Flanders (Belgium).

Designing Policy Mixes for Resource Efficiency: The Role of Public Acceptability

Where the public acceptability of a policy can influence its chance of success, it is important to anticipate and mitigate potential concerns. This paper applies search frequency analysis and a form of claims-making analysis to identify public acceptability concerns among fourteen policies proposed by the EU-funded DYNAMIX project to achieve EU resource efficiency. Key points of contention in the corresponding public discourses focus primarily on trust, fairness, effectiveness and cost. We use our findings to provide specific recommendations for the design and implementation of the proposed policy mix which are intended to improve the public acceptability of contentious aspects, and highlight some broader insights for policymakers.

The role of paradigm analysis in the development of policies for a resource efficient economy

Policy makers are often called upon to navigate between scientists’ urgent calls for long-term concerted action to reduce the environmental impacts due to resource use, and the public’s concerns over policies that threaten lifestyles or jobs. Against these political challenges, resource efficiency policy making is often a changeable and even chaotic process, which has fallen short of the political ambitions set by democratically elected governments. This article examines the importance of paradigms in understanding how the public collectively responds to new policy proposals, such as those developed within the project DYNAmic policy MiXes for absolute decoupling of environmental impact of EU resource use from economic growth (DYNAMIX). The resulting proposed approach provides a framework to understand how different concerns and worldviews converge within public discourse, potentially resulting in paradigm change. Thus an alternative perspective on how resource efficiency policy can be development is proposed, which envisages early policies to lay the ground for future far-reaching policies, by altering the underlying paradigm context in which the public receive and respond to policy. The article concludes by arguing that paradigm change is more likely if the policy is conceived, framed, designed, analyzed, presented, and evaluated from the worldview or paradigm pathway that it seeks to create (i.e. the destination paradigm).