Life cycle assessment in the supply chain: a review and case study

The paper addresses the use of Life Cycle Assessment as a tool for analysing freight transport activity in product supply chains. Published works that have assessed freight transport energy use in supply chain operations are reviewed and their results summarized. A case study of the energy use in the supply chains for jeans sold in both the UK and France is presented. The results of this case study indicate that the location from which cotton is sourced can have a major impact on the total energy used in commercial transport in the jeans supply chain. However, overall, this has a limited impact on the total energy used in producing and supplying jeans. This is because the vast majority of total energy used in the supply chain is consumed during cotton cultivation, denim production and jeans manufacture. The work also demonstrates that the amount of energy used by consumers transporting jeans to their homes by car can be greater than the total commercial transport energy used in the supply chain (per kg of jeans transported).

Low emission zones: the likely effects on the freight transport sector

London's air quality has improved over recent decades, but is still the worst in the UK. Road transport emissions play an important part in this pollution. A low emission zone (LEZ) would help to accelerate the introduction of cleaner vehicles, and reduce the number of older, more polluting vehicles operating in London. Survey results indicate that there is some support among goods vehicle operators for a LEZ in London, depending on the precise scheme definition. Operators would generally try to comply with LEZ regulations, with most companies either using technical approaches to ensure that their London vehicle fleet complied with the required emission standard, or redeploying vehicles with the appropriate emission standard from other locations.

London freight data report

Report produced for the Transport for London Freight Unit as part of the London Freight Data Centre. Contains data and information about a wide range of freight transport issues in London.

Improving energy efficiency in the road freight transport sector: the application of a vehicle approach

Several approaches can be used to analyse performance, energy consumption and CO2 emissions in freight transport. In this paper we define and apply a vehicle-oriented, bottom up survey approach, the so called ‘vehicle approach’, in contrast to a ‘supply chain approach’. The main objective of the approach is to assess the impacts of various freight transport operations on efficiency and energy use. We apply the approach, comparing official statistics on freight transport and energy efficiency in Britain and France. Results on freight intensity, vehicle utilisation, fuel use, fuel efficiency and CO2 intensity are compared for the two countries. The results indicate comparable levels of operational and fuel efficiency in road freight transport operations in the two countries. Issues that can be addressed with the vehicle approach include: the impacts of technology innovations and logistics decisions implemented in freight companies, and the quantification of the effect of policy measures on fuel use at the national level.

Analysing energy use in supply chains: the case of fruits & vegetables and furniture

An increasing number of producers, retailers and third-party logistics providers are interested in carrying out energy assessments of their product supply chain. This is due to sensitivity about climate change and carbon emissions, but also to high energy prices. This paper presents an analytical approach developed to measure energy use in logistics activities in product supply chains. The approach (based on the Life Cycle Approach) quantifies energy use in transport and logistics activities at all stages of a product supply chain. The work has demonstrated that such an assessment approach based on the supply chain is useful in comparing the energy use implications of different strategies. This supply chain approach can be used to consider options such as sourcing and distribution centre locations, transport modes, road freight vehicle types and weights, vehicle load factors, empty running, transport distance and the balance between consumer shopping trips and delivery to the home.

Energy efficiency and greenhouse gas emissions of different supply chains: a comparison of French, UK and Belgian cases

Freight transportation system is critical to economic activity but it carries significant environmental costs, notably GHG emissions and climate change : energy use and corresponding CO2 emissions is increasing faster in freight transport than in other sectors and this increase is primarily the result of increased trade. This paper compares the transport activities, associated energy consumption and CO2 emissions of different supply chains for a range of products in three countries: Belgium, France and United Kingdom. Among the products considered are furniture and ‘fruits & vegetables’. For each of these products, different supply chains, involving more or less transport activity and associated energy consumption are analysed in each country. The comparison highlights some of the main factors that influence GHG emissions for different supply chains and illustrates how they vary according to product and country of final distribution. In more detail, the paper addresses the main differences between the supply chains of these products namely, the origin of their sourcing, the logistical organisation between production and retail and different types of retail outlet. The origin of the sourcing impact is mainly related to distance. The impact of the logistical organisation between raw material and retail on GHG emissions is linked to the mode and vehicle choice and to the load factor. As for retail, the consumer trip emissions, between his home and the retail outlet, are also an important part of the whole supply chain emissions. It is worthwhile to notice that our goal in this project is to consider the whole supply chain, from production to consumption. Therefore a particular focus is put on the mobility behaviours of consumers purchasing the studied products during their shopping and dropping back home activities related to these products. Especially a web based survey has been conducted and the gathered results offer an opportunity for drawing a more detailed picture of the associated CO2 emissions. This paper uses the results of an ongoing research on supply chain energy efficiency, funded by ADEME (the French Energy Agency) through the French program on transport research (PREDIT). This research is based on a comprehensive review of the various approaches to quantifying the environmental impacts of supply chains together with data collection from a range of organisations including manufacturers, retailers and transport companies. We will first present the developed methodologies, then the results corresponding to each studied product will be described. A discussion of the potential application of the research approach to the wider debate about the environmental impact of freight transport and the scope for GHG emissions reduction targets to be achieved will be included.

Review of survey techniques used in urban freight studies

Report produced as part of the Green Logistics project (EPSRC and Department for Transport funded). This report is based on a review of studies in which data has been collected to obtain an understanding of road-based urban freight transport activities and patterns of operation. Studies from the UK and other countries have been included in this review. While it may be thought that relatively few such studies have been conducted, approximately 60 such studies have been identified as taking place in the UK and approximately 100 elsewhere since the 1960s. In addition, other studies have been carried out in order to assess industry and policy maker opinions about urban freight transport , however this type of study and survey work is not the focus of this report. Gaining an understanding of road-based urban freight transport activities is an important element in determining the current sustainability of such activity (in economic, social and environmental terms) and how best to go about enhancing its sustainability. By reviewing the existing survey work in this subject it has been possible to draw together the methodologies developed and implemented. This should therefore be of help in understanding which techniques are most commonly used, the strengths and limitations of the various techniques, and in assessing the most suitable urban freight survey techniques for a given study.

Survey forms used in urban freight studies

Report produced as part of the Green Logistics project (EPSRC and Department for Transport funded). This report contains examples of survey forms used in urban freight studies both in the UK and overseas. The studies from which these examples have been drawn range in data from 1970-2008. The purpose of the report is to provide insight into the types of questions used in different survey techniques and also into the design of survey forms. It is hoped that bringing together in a single document these examples of urban freight survey forms will be of use to researchers involved in such studies in future in planning and designing their survey work. Examples of several different types of survey techniques are provided including: Establishment surveys -- Commodity flow surveys -- Freight operator surveys -- Roadside interview surveys -- Driver surveys -- Vehicle observation surveys -- Parking surveys -- Vehicle trip diaries -- Service provider surveys

Review of UK urban freight studies

Report produced as part of the Green Logistics project (EPSRC and Department for Transport funded). This report is based on a review of UK studies in which data has been collected to obtain an understanding of road-based urban freight transport activities and patterns of operation. Urban freight remains relatively under researched by comparison with passenger transport both in the UK and worldwide. However, in the UK there have been a number of studies that have attempted to investigate road-based freight operations since the 1960s. But no attempt has been made to draw together the results of these various studies and compare them. This is what is presented in this report. The report has studied the results of 30 UK urban freight studies carried out in the last decade in order to attempt to provide insight into urban freight activities in our towns and cities. It presents this current knowledge about urban freight transport activities in the UK from these studies, and compares the similarities and differences between study findings.

The challenge of high cube ISO containers for British rail freight operations

Rail freight activity in Britain has increased by almost 50% in the last ten years, with the movement of deep sea ISO containers between ports and inland terminals being a significant growth sector, with considerable further growth potential. High cube ISO containers have become more prevalent, posing a considerable challenge for rail freight operators since much of the rail network has insufficient loading gauge clearance to carry them on standard wagons. This paper investigates the extent to which rail currently handles high cube container movements to/from ports through the analysis of a representative survey of container trains in 2007. The incidence of high cube containers carried by services on gauge-cleared and non-gauge-cleared routes is identified to assess the extent to which a lack of gauge enhancement affects the movement by rail of high cube containers and to identify the impacts of the lack of gauge clearance on operating efficiency. The paper concludes with an evaluation of the likely consequences of the gauge enhancement schemes for which funding is now committed, assessing the extent to which they will reduce or remove the barriers associated with carrying high cube containers between ports and their hinterlands.