Ultrasonic and X-ray computed tomography characterization of progressive fracture damage in low-porous carbonate rocks

This paper studies the fracturing process in low-porous rocks during uniaxial compressive tests considering the original defects and the new mechanical cracks in the material. For this purpose, five different kinds of rocks have been chosen with carbonate mineralogy and low porosity (lower than 2%). The characterization of the fracture damage is carried out using three different techniques: ultrasounds, mercury porosimetry and X-ray computed tomography. The proposed methodology allows quantifying the evolution of the porous system as well as studying the location of new cracks in the rock samples. Intercrystalline porosity (the smallest pores with pore radius < 1 μm) shows a limited development during loading, disappearing rapidly from the porosimetry curves and it is directly related to the initial plastic behaviour in the stress–strain patterns. However, the biggest pores (corresponding to the cracks) suffer a continuous enlargement until the unstable propagation of fractures. The measured crack initiation stress varies between 0.25 σp and 0.50 σp for marbles and between 0.50 σp and 0.85 σp for micrite limestone. The unstable propagation of cracks is assumed to occur very close to the peak strength. Crack propagation through the sample is completely independent of pre-existing defects (porous bands, stylolites, fractures and veins). The ultrasonic response in the time-domain is less sensitive to the fracture damage than the frequency-domain. P-wave velocity increases during loading test until the beginning of the unstable crack propagation. This increase is higher for marbles (between 15% and 30% from initial vp values) and lower for micrite limestones (between 5% and 10%). When the mechanical cracks propagate unstably, the velocity stops to increase and decreases only when rock damage is very high. Frequency analysis of the ultrasonic signals shows clear changes during the loading process. The spectrum of treated waveforms shows two main frequency peaks centred at low (~ 20 kHz) and high (~ 35 kHz) values. When new fractures appear and grow the amplitude of the high-frequency peak decreases, while that of the low-frequency peak increases. Besides, a slight frequency shift is observed towards higher frequencies.

Los mármoles comerciales “Marrón Imperial” y “Marrón Emperador” (S.E. España). Caracterización petrológica y criterios de exploración

Los mármoles comerciales "Marrón Imperial" y "Marrón Emperador" son dolomías brechoides que de acuerdo con la clasificación del MIA pertenece al Grupo C de mármoles comerciales. Se determinan sus parámetros petrofísicos según la norma UNE. Sus rasgos petrológicos se estudian mediante microscopio petrográfico de luz transmitida y microscopio electrónico de barrido (MEB) (en modo de electrones secundarios y electrones retrodispersados). Estas rocas son básicamente dolomías mesocristalinas con abundantes vénulas calcíticas politexturales relacionadas con procesos de brechificación y de dolomitización. Rasgos kársticos aumentan la complejidad petrológica de estas rocas ornamentales cuyo litosoma son las dolomías masivas del Cretácico Superior (¿Turoniense?) del dominio Prebético Externo. El material explotado pertenece a una alineación morfoestructural que va desde Jumilla hasta el NE de Caudete y está relacionado con la falla Jumilla-Yecla-Caudete-Font de la Figuera. La relación entre esta falla y las dolomías turonienses son el principal criterio de exploración de estas rocas ornamentales.