Review and extension of the McCabe-Thiele method covering multiple feeds, products and heat transfer stages

The McCabe-Thiele method is a classical approximate graphical method for the conceptual design of binary distillation columns which is still widely used, mainly for didactical purposes, though it is also valuable for quick preliminary calculations. Nevertheless, no complete description of the method has been found and situations such as different thermal feed conditions, multiple feeds, possibilities to extract by-products or to add or remove heat, are not always considered. In the present work we provide a systematic analysis of such situations by developing the generalized equations for: a) the operating lines (OL) of each sector, and b) the changeover line that provides the connection between two consecutive trays of the corresponding sectors separated by a lateral stream of feed, product, or a heat removal or addition.

Determination of fat-soluble vitamins in vegetable oils through microwave-assisted high-performance liquid chromatography

In this manuscript, a study of the effect of microwave radiation on the high-performance liquid chromatography separation of tocopherols and vitamin K1 was conducted. The novelty of the application was the use of a relatively low polarity mobile phase in which the dielectric heating effect was minimized to evaluate the nonthermal effect of the microwave radiation over the separation process. Results obtained show that microwave-assisted high-performance liquid chromatography had a shorter analysis time from 31.5 to 13.3 min when the lowest microwave power was used. Moreover, narrower peaks were obtained; hence the separation was more efficient maintaining or even increasing the resolution between the peaks. This result confirms that the increase in mobile phase temperature is not the only variable for improving the separation process but also other nonthermal processes must intervene. Fluorescence detection demonstrated better signal-to-noise compared to photodiode arrayed detection mainly due to the independent effect of microwave pulses on the baseline noise, but photodiode array detection was finally chosen as it allowed a simultaneous detection of nonfluorescent compounds. Finally, a determination of the content of the vitamin E homologs was carried out in different vegetable oils. Results were coherent with those found in the literature.

Analysis of the Connecting Zone between Consecutive Sections in Distillation Columns Covering Multiple Feeds, Products and Heat Transfer Stages

In the present work, we provide a systematic analysis about all tine streams involved in the zone connecting two consecutive sections for the design of distillation columns with different thermal feed conditions, product extractions and heat additions or withdrawals. This analysis allows a better understanding of what happens on a feed or side draw (of mass or energy) stage, what compositions are or are not in equilibrium, and the impact on internal liquid and vapor flows.

Supplementary Material: Analysis of the Connecting Zone Between Consecutive Sections in Distillation Columns Covering Multiple Feeds, Products and Heat Transfer Stages

Supplementary Material: J.A. REYES-LABARTA, M.D. SERRANO and A. MARCILLA. ANALYSIS OF THE CONNECTING ZONE BETWEEN CONSECUTIVE SECTIONS IN DISTILLATION COLUMNS COVERING MULTIPLE FEEDS, PRODUCTS AND HEAT TRANSFER STAGES. Latin American Applied Research an International Journal of Chemical Engineering. 2014, vol. 44(4), 307-312 (http://www.laar.uns.edu.ar/indexes/artic_v4404/44_04_307.pdf)