Characterization and ageing study of poly(lactic acid) films plasticized with oligomeric lactic acid

Poly(lactic acid) (PLA) was melt-blended with a bio-based oligomeric lactic acid (OLA) plasticizer at different concentrations between 15 wt% and 25 wt% in order to enhance PLA ductility and to get a fully biodegradable material with potential application in films manufacturing. OLA was an efficient plasticizer for PLA, as it caused a significant decrease on glass transition temperature (Tg) while improving considerably ductile properties. Only one Tg value was observed in all cases and no apparent phase separation was detected. Films obtained by compression moulding were stored during 3 months under ambient controlled conditions and thermal, mechanical, structural and oxygen barrier properties were studied in order to evaluate the stability of the PLA–OLA films over time. Blends with 20 and 25 wt% OLA remained stable and compatible with PLA within the ageing period. Besides, PLA–20 wt% OLA formulation was the only one which maintained its amorphous state with adequate thermal, mechanical and oxygen barrier properties for flexible films manufacturing.

Synthesis and Characterization of Lactic Acid Oligomers: Evaluation of Performance as Poly(Lactic Acid) Plasticizers

The use of fully bio-based and biodegradable materials for massive applications, such as food packaging, is an emerging tendency in polymer research. But the formulations proposed in this way should preserve or even increase the functional properties of conventional polymers, such as transparency, homogeneity, mechanical properties and low migration of their components to foodstuff. This is not always trivial, in particular when brittle biopolymers, such as poly(lactic acid) (PLA), are considered. In this work the formulation of innovative materials based on PLA modified with highly compatible plasticizers, i.e. oligomers of lactic acid (OLAs) is proposed. Three different synthesis conditions for OLAs were tested and the resulting additives were further blended with commercial PLA obtaining transparent and ductile materials, able for films manufacturing. These materials were tested in their structural, thermal and tensile properties and the best formulation among the three materials was selected. OLA with molar mass (Mn) around 1,000 Da is proposed as an innovative and fully compatible and biodegradable plasticizer for PLA, able to replace conventional plasticizers (phthalates, adipates or citrates) currently used for films manufacturing in food packaging applications.

La interdependencia hispano-argelina en cuestiones energéticas

Desde los años 1980 España y Europa importan una parte creciente de sus hidrocarburos de Argelia. Esta situación ha llevado a una interdependencia que puede resultar peligrosa por ambas partes. España no consigue reducir su consumo de hidrocarburos, pero en su esfuerzo por diversificar e independizarse del petróleo ha incrementado significativamente el consumo de gas natural procedente de Argelia. Por su parte este país ha aumentado sus reservar en divisas lo que le ha permitido mejorar extraordinariamente su situación desde la guerra civil de los años 1990 y garantizar a corto plazo el estatus quo social y político. Sin embargo esa misma dependencia de los hidrocarburos le impide resolver los graves problemas estructurales de su juventud y de una economía rentista. Esta comunicación estudia estas dependencias analizando la creciente complejidad del mercado de los hidrocarburos, los esfuerzos españoles por diversificar sus fuentes de abastecimiento y las apuestas de Argelia por continuar suministrando energía primaria.