Effects of landscape spatial heterogeneity on dryland restoration success. The combined role of site conditions and reforestation techniques in southeastern Spain

In occidental Europe, Spain is one of countries the most severely affected by desertification (Arnalds & Arsher 2000). Particularly, South-eastern Spain is considered as one of the most threatened areas by desertification in Mediterranean Europe (Vallejo 1997). In 2003, the Valencia Regional Forest Service implemented a restoration demonstration project in this area. The project site is a small catchment (25 ha) located in the Albatera municipality. The catchment is highly heterogeneous, with terraced slopes, south-facing slopes and north-facing slopes. The restoration strategy was based on planting evergreen trees and shrubs which can grow quickly after disturbances, and on field treatments aimed at maximizing water collection (micro-catchments, planting furrows), organic amendment (compost), and conservation (tree shelters, mulching). On south landscape unit, the whole category of restoration treatments was applied: water micro-catchment + Tubex tree shelters + mulching & compost, while on north landscape unit: netting tree shelters + mulching & compost only were applied, while in terrace landscape unit: furrows + netting tree shelters + mulching & compost were applied. Survival and growth of the planted seedlings were used as metrics of restoration success. To assess the effects of the treatments applied for soil conservation, soil loss rates (from 2005 to 2009) were evaluated using the erosion pin method. We conclude that, despite the limiting conditions prevailing on the south unit, this landscape unit showed the highest survival and growth plant rates in the area. The best seedling performances on the south landscape unit were probably due to the highest technical efforts applied, consisting in the water micro-catchment installation and the Tubex plant shelters addition. In addition, soil loss rates followed decreasing trends throughout the assessment period. Soil loss rates were highest on south landscape unit in comparison with the other landscape units, due to the more accentuated relief. North landscape unit and terrace unit showed a net soil mass gain, probably reflecting the trapping of sediments produced by plantation works.

Differences between the personal, social and emotional profiles of teaching and computer engineering professionals and students

The evidence suggests that emotional intelligence and personality traits are important qualities that workers need in order to successfully exercise a profession. This article assumes that the main purpose of universities is to promote employment by providing an education that facilitates the acquisition of abilities, skills, competencies and values. In this study, the emotional intelligence and personality profiles of two groups of Spanish students studying degrees in two different academic disciplines – computer engineering and teacher training – were analysed and compared. In addition, the skills forming part of the emotional intelligence and personality traits required by professionals (computer engineers and teachers) in their work were studied, and the profiles obtained for the students were compared with those identified by the professionals in each field. Results revealed significant differences between the profiles of the two groups of students, with the teacher training students scoring higher on interpersonal skills; differences were also found between professionals and students for most competencies, with professionals in both fields demanding more competencies that those evidenced by graduates. The implications of these results for the incorporation of generic social, emotional and personal competencies into the university curriculum are discussed.

Earth’s Rotation: A Challenging Problem in Mathematics and Physics

A suitable knowledge of the orientation and motion of the Earth in space is a common need in various fields. That knowledge has been ever necessary to carry out astronomical observations, but with the advent of the space age, it became essential for making observations of satellites and predicting and determining their orbits, and for observing the Earth from space as well. Given the relevant role it plays in Space Geodesy, Earth rotation is considered as one of the three pillars of Geodesy, the other two being geometry and gravity. Besides, research on Earth rotation has fostered advances in many fields, such as Mathematics, Astronomy and Geophysics, for centuries. One remarkable feature of the problem is in the extreme requirements of accuracy that must be fulfilled in the near future, about a millimetre on the tangent plane to the planet surface, roughly speaking. That challenges all of the theories that have been devised and used to-date; the paper makes a short review of some of the most relevant methods, which can be envisaged as milestones in Earth rotation research, emphasizing the Hamiltonian approach developed by the authors. Some contemporary problems are presented, as well as the main lines of future research prospected by the International Astronomical Union/International Association of Geodesy Joint Working Group on Theory of Earth Rotation, created in 2013.

Simultaneous environmental and economic process synthesis of Isobutane Alkylation

This multidisciplinary study concerns the optimal design of processes with a view to both maximizing profit and minimizing environmental impacts. This can be achieved by a combination of traditional chemical process design methods, measurements of environmental impacts and advanced mathematical optimization techniques. More to the point, this paper presents a hybrid simulation-multiobjective optimization approach that at once optimizes the production cost and minimizes the associated environmental impacts of isobutane alkylation. This approach has also made it possible to obtain the flowsheet configurations and process variables that are needed to manufacture isooctane in a way that satisfies the above-stated double aim. The problem is formulated as a Generalized Disjunctive Programming problem and solved using state-of-the-art logic-based algorithms. It is shown, starting from existing alternatives for the process, that it is possible to systematically generate a superstructure that includes alternatives not previously considered. The optimal solution, in the form a Pareto curve, includes different structural alternatives from which the most suitable design can be selected. To evaluate the environmental impact, Life Cycle Assessment based on two different indicators is employed: Ecoindicator 99 and Global Warming Potential.

Simultaneous synthesis of heat exchanger networks with pressure recovery: optimal integration between heat and work

The optimal integration between heat and work may significantly reduce the energy demand and consequently the process cost. This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs) in which the pressure levels of the process streams can be adjusted to enhance the heat integration. A superstructure is proposed for the HEN design with pressure recovery, developed via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation. The process conditions (stream temperature and pressure) must be optimized. Furthermore, the approach allows for coupling of the turbines and compressors and selection of the turbines and valves to minimize the total annualized cost, which consists of the operational and capital expenses. The model is tested for its applicability in three case studies, including a cryogenic application. The results indicate that the energy integration reduces the quantity of utilities required, thus decreasing the overall cost.

Relationship between static and dynamic elastic modulus of calcarenite heated at different temperatures: the San Julián's stone

The San Julián’s stone is the main material used to build the most important historical buildings in Alicante city (Spain). This paper describes the analysis developed to obtain the relationship between the static and the dynamic modulus of this sedimentary rock heated at different temperatures. The rock specimens have been subjected to heating processes at different temperatures to produce different levels of weathering on 24 specimens. The static and dynamic modulus has been measured for every specimen by means of the ISRM standard and ultrasonic tests, respectively. Finally, two analytic formulas are proposed for the relationship between the static and the dynamic modulus for this stone. The results have been compared with some relationships proposed by different researchers for other types of rock. The expressions presented in this paper can be useful for the analysis, using non-destructive techniques, of the integrity level of historical constructions built with San Julián’s stone affected by fires.

Mathematical programming model for heat exchanger design through optimization of partial objectives

Mathematical programming can be used for the optimal design of shell-and-tube heat exchangers (STHEs). This paper proposes a mixed integer non-linear programming (MINLP) model for the design of STHEs, following rigorously the standards of the Tubular Exchanger Manufacturers Association (TEMA). Bell–Delaware Method is used for the shell-side calculations. This approach produces a large and non-convex model that cannot be solved to global optimality with the current state of the art solvers. Notwithstanding, it is proposed to perform a sequential optimization approach of partial objective targets through the division of the problem into sets of related equations that are easier to solve. For each one of these problems a heuristic objective function is selected based on the physical behavior of the problem. The global optimal solution of the original problem cannot be ensured even in the case in which each of the sub-problems is solved to global optimality, but at least a very good solution is always guaranteed. Three cases extracted from the literature were studied. The results showed that in all cases the values obtained using the proposed MINLP model containing multiple objective functions improved the values presented in the literature.

Applying model-driven engineering to the development of Rich Internet Applications for Business Intelligence

Business Intelligence (BI) applications have been gradually ported to the Web in search of a global platform for the consumption and publication of data and services. On the Internet, apart from techniques for data/knowledge management, BI Web applications need interfaces with a high level of interoperability (similar to the traditional desktop interfaces) for the visualisation of data/knowledge. In some cases, this has been provided by Rich Internet Applications (RIA). The development of these BI RIAs is a process traditionally performed manually and, given the complexity of the final application, it is a process which might be prone to errors. The application of model-driven engineering techniques can reduce the cost of development and maintenance (in terms of time and resources) of these applications, as they demonstrated by other types of Web applications. In the light of these issues, the paper introduces the Sm4RIA-B methodology, i.e., a model-driven methodology for the development of RIA as BI Web applications. In order to overcome the limitations of RIA regarding knowledge management from the Web, this paper also presents a new RIA platform for BI, called RI@BI, which extends the functionalities of traditional RIAs by means of Semantic Web technologies and B2B techniques. Finally, we evaluate the whole approach on a case study—the development of a social network site for an enterprise project manager.

A Theorical Point of View of Reality, Perception, and Language

It is possible to view the relations between mathematics and natural language from different aspects. This relation between mathematics and language is not based on just one aspect. In this article, the authors address the role of the Subject facing Reality through language. Perception is defined and a mathematical theory of the perceptual field is proposed. The distinction between purely expressive language and purely informative language is considered false, because the subject is expressed in the communication of a message, and conversely, in purely expressive language, as in an exclamation, there is some information. To study the relation between language and reality, the function of ostensibility is defined and propositions are divided into ostensives and estimatives.

Convergence analysis and validation of low cost distance metrics for computational cost reduction of the Iterative Closest Point algorithm

The Iterative Closest Point algorithm (ICP) is commonly used in engineering applications to solve the rigid registration problem of partially overlapped point sets which are pre-aligned with a coarse estimate of their relative positions. This iterative algorithm is applied in many areas such as the medicine for volumetric reconstruction of tomography data, in robotics to reconstruct surfaces or scenes using range sensor information, in industrial systems for quality control of manufactured objects or even in biology to study the structure and folding of proteins. One of the algorithm’s main problems is its high computational complexity (quadratic in the number of points with the non-optimized original variant) in a context where high density point sets, acquired by high resolution scanners, are processed. Many variants have been proposed in the literature whose goal is the performance improvement either by reducing the number of points or the required iterations or even enhancing the complexity of the most expensive phase: the closest neighbor search. In spite of decreasing its complexity, some of the variants tend to have a negative impact on the final registration precision or the convergence domain thus limiting the possible application scenarios. The goal of this work is the improvement of the algorithm’s computational cost so that a wider range of computationally demanding problems from among the ones described before can be addressed. For that purpose, an experimental and mathematical convergence analysis and validation of point-to-point distance metrics has been performed taking into account those distances with lower computational cost than the Euclidean one, which is used as the de facto standard for the algorithm’s implementations in the literature. In that analysis, the functioning of the algorithm in diverse topological spaces, characterized by different metrics, has been studied to check the convergence, efficacy and cost of the method in order to determine the one which offers the best results. Given that the distance calculation represents a significant part of the whole set of computations performed by the algorithm, it is expected that any reduction of that operation affects significantly and positively the overall performance of the method. As a result, a performance improvement has been achieved by the application of those reduced cost metrics whose quality in terms of convergence and error has been analyzed and validated experimentally as comparable with respect to the Euclidean distance using a heterogeneous set of objects, scenarios and initial situations.