Electrocatalytic hydrogenation of acetophenone using a Polymer Electrolyte Membrane Electrochemical Reactor

The use of a solid polymeric electrolyte, spe, is not commonly found in organic electrosynthesis despite its inherent advantages such as the possible elimination of the electrolyte entailing simpler purification processes, a smaller sized reactor and lower energetic costs. In order to test if it were possible to use a spe in industrial organic electrosynthesis, we studied the synthesis of 1-phenylethanol through the electrochemical hydrogenation of acetophenone using Pd/C 30 wt% with different loadings as cathode and a hydrogen gas diffusion anode. A Polymer Electrolyte Membrane Electrochemical Reactor, PEMER, with a fuel cell structure was chosen to carry out electrochemical reduction with a view to simplifying an industrial scale-up of the electrochemical process. We studied the influence of current density and cathode catalyst loading on this electroorganic synthesis. Selectivity for 1-phenylethanol was around 90% with only ethylbenzene and hydrogen detected as by-products.

Performance Assessment of a Polymer Electrolyte Membrane Electrochemical Reactor under Alkaline Conditions – A Case Study with the Electrooxidation of Alcohols

A novel polymer electrolyte membrane electrochemical reactor (PEMER) configuration has been employed for the direct electrooxidation of propargyl alcohol (PGA), a model primary alcohol, towards its carboxylic acid derivatives in alkaline medium. The PEMER configuration comprised of an anode and cathode based on nanoparticulate Ni and Pt electrocatalysts, respectively, supported on carbonaceous substrates. The electrooxidation of PGA was performed in 1.0 M NaOH, where a cathode based on a gas diffusion electrode was manufactured for the reduction of oxygen in alkaline conditions. The performance of a novel alkaline anion-exchange membrane based on Chitosan (CS) and Poly(vinyl) alcohol (PVA) in a 50:50 composition ratio doped with a 5 wt.% of poly (4-vinylpyridine) organic ionomer cross-linked, methyl chloride quaternary salt resin (4VP) was assessed as solid polymer electrolyte. The influence of 4VP anionic ionomer loading of 7, 12 and 20 wt.% incorporated into the electrocatalytic layers was examined by SEM and cyclic voltammetry (CV) upon the optimisation of the electroactive area, the mechanical stability and cohesion of the catalytic ink onto the carbonaceous substrate for both electrodes. The performance of the 4VP/CS:PVA membrane was compared with the commercial alkaline anion-exchange membrane FAA −a membrane generally used in direct alcohol alkaline fuel cells- in terms of polarisation plots in alkaline conditions. Furthermore, preparative electrolyses of the electrooxidation of PGA was performed under alkaline conditions of 1 M NaOH at constant current density of 20 mA cm−2 using a PEMER configuration to provide proof of the principle of the feasibility of the electrooxidation of other alcohols in alkaline media. PGA conversion to Z isomers of 3-(2-propynoxy)-2-propenoic acid (Z-PPA) was circa 0.77, with average current efficiency of 0.32. Alkaline stability of the membranes within the PEMER configuration was finally evaluated after the electrooxidation of PGA.

Electrolito sólido polimérico: desde las pilas de combustible hasta la electrosíntesis orgánica

En este trabajo, en primer lugar, se presenta una nueva técnica desarrollada en nuestro laboratorio para el estudio electroquímico de las capas catalíticas de las pilas de combustible en células de tres electrodos, centrándonos en el proceso de electroxidación de ácido fórmico como reacción de test. Gracias a esta técnica se han estudiado parámetros de construcción como % en peso del metal, relación Nafion / sólidos totales y recubrimiento catalítico comprobando como la adsorción irreversible de adátomos de Bi sobre Pt soportado sobre Vulcan XC-72 favorece este proceso y como puede caracterizarse la capa catalítica de una pila de combustible de ácido fórmico (DFAFC) de forma integral utilizando estudios de sistemas nanoparticulados de Pt-Pd soportados sobre Vulcan XC-72 en el seno de ésta. En segundo lugar se ha introducido el concepto de PEMER (Polymer Electrolyte Membrane Electrochemical Reactor). De esta forma, una configuración electródica propia de las pilas de combustible se utiliza en electrosíntesis orgánica. Como reacciones test se han testeado la formación de 1-feniletanol como producto mayoritario por hidrogenación electrocatalítica de la acetofenona sobre nanopartículas de Pd soportadas sobre Vulcan XC-72 como electrocatalizador y, utilizando Pb (catalizador no noble) soportado sobre Vulcan XC-72, se ha estudiado la ruptura del puente disulfuro de L-cistina y N,N-diacetil-L-cistina (NNDAC) para obtener L-cisteína y N-acetil- L-cisteína (NAC). En ambas reacciones, hidrogenación y ruptura del puente disulfuro, se han analizado tanto parámetros constructivos de la capa catalítica como parámetros de proceso tanto a escala laboratorio con el uso de un reactor comercial de 25 cm² como a escala pre-piloto con la construcción de un reactor de 100 cm².

Electrochemical synthesis at pre-pilot scale of 1-phenylethanol by cathodic reduction of acetophenone using a solid polymer electrolyte

The pre-pilot scale synthesis of 1-phenylethanol was carried out by the cathodic hydrogenation of acetophenone in a 100 cm2 (geometric area) Polymer Electrolyte Membrane Electrochemical Reactor. The cathode was a Pd/C electrode. Hydrogen oxidation on a gas diffusion electrode was chosen as anodic reaction in order to take advantage of the hydrogen evolved during the reduction. This hydrogen oxidation provides the protons needed for the synthesis. The synthesis performed with only a solid polymer electrolyte, spe, has lower fractional conversion although a higher selectivity than that carried out using a support–electrolyte–solvent together with a spe. However, the difference between these two cases is rather small and since the work-up and purification of the final product are much easier when only a spe is used, this last process was chosen for the pre-pilot electrochemical synthesis of 1-phenylethanol.