SOA-Based Model for Value-Added ITS Services Delivery

Integration is currently a key factor in intelligent transportation systems (ITS), especially because of the ever increasing service demands originating from the ITS industry and ITS users. The current ITS landscape is made up of multiple technologies that are tightly coupled, and its interoperability is extremely low, which limits ITS services generation. Given this fact, novel information technologies (IT) based on the service-oriented architecture (SOA) paradigm have begun to introduce new ways to address this problem. The SOA paradigm allows the construction of loosely coupled distributed systems that can help to integrate the heterogeneous systems that are part of ITS. In this paper, we focus on developing an SOA-based model for integrating information technologies (IT) into ITS to achieve ITS service delivery. To develop our model, the ITS technologies and services involved were identified, catalogued, and decoupled. In doing so, we applied our SOA-based model to integrate all of the ITS technologies and services, ranging from the lowest-level technical components, such as roadside unit as a service (RS S), to the most abstract ITS services that will be offered to ITS users (value-added services). To validate our model, a functionality case study that included all of the components of our model was designed.

Brackish groundwater desalination by reverse osmosis in southeastern Spain. Presence of emerging contaminants and potential impacts on soil-aquifer media

Desalinated brackish groundwater is becoming a new source of water supply to comply with growing water demands, especially in (semi-) arid countries. Recent publications show that some chemical compounds may persist in an unaltered form after the desalination processes and that there is an associated risk of mixing waters with different salinity for irrigation. At the university of Alicante campus (Spain), a mix of desalinated brackish groundwater and water from the existing aquifer is currently applied for landscape irrigation. The presence of 209 emerging compounds, surfactants, priority substances according to the 2008/105/EC Directive, 11 heavy metals and microbiological organisms in blended water and aquifer samples was investigated. Thirty-five compounds were detected (pesticides, pharmaceuticals and surfactants) among them two priority substances α-endosulfan and Ni were found above the permitted maximum concentration. Blended water used for landscape irrigation during the summer period is supersaturated with respect to carbonates, which may ultimately lead to mineral precipitation in the soil-aquifer media and changes in hydraulic parameters.

New-Generation Hybrid Contact Lens for the Management of Extreme Irregularity in a Thin Cornea After Unsuccessful Excimer Laser Refractive Surgery

Purpose: To report a very successful outcome obtained with the fitting of a new-generation hybrid contact lens of reverse geometry in a thin cornea with extreme irregularity due to the presence of a central island after unsuccessful myopic excimer laser refractive surgery. Methods: A 32-year-old man attended to our clinic complaining of very poor vision in his right eye after bilateral laser in situ keratomileusis (treatment or surgery) for myopia correction and some additional retreatments afterward. After a comprehensive ocular evaluation, contact lens fitting with a reverse geometry hybrid contact lens (SynergEyes PS, SynergEyes, Carlsbad, CA) was proposed as a solution for this case. Visual, refractive, and ocular aberrometric outcomes with the contact lens were evaluated. Results: Distance visual acuity improved from a prefitting uncorrected value of 20/200 to a postfitting corrected value of 20/16. Prefitting manifest refraction was +6.00 sphere and −3.00 cylinder at 70°, with a corrected distance visual acuity of 20/40. Higher order root mean square for a 5-mm pupil changed from a prefitting value of 1.45 to 0.34 µm with the contact lens. The contact lens wearing was reported as comfortable, and the patient was very satisfied with this solution. Conclusions: The SynergEyes PS contact lens seems to be an excellent option for the visual rehabilitation of corneas with extreme irregularity after myopic excimer laser surgery, minimizing the level of higher order aberrations and providing an excellent visual outcome.

The role of mesoporosity and Si/Al ratio in the catalytic etherification of glycerol with benzyl alcohol using ZSM-5 zeolites

A comparative study of the influence of three different acid solids as catalysts (conventional zeolites Z15c with Si/Al = 19.5 and Z40c with Si/Al = 48.2, and a hierarchical zeolite Z40c-H with Si/Al = 50.0) for the etherification of glycerol with benzyl alcohol was performed. The catalytic activity and selectivity of these zeolites was elucidated at different catalyst contents. Three different ethers (3-benzyloxy-1,2-propanediol, which is a mono-benzyl-glycerol ether (MBG) and 1,3-dibenzyloxy-2-propanol, which is a di-benzyl-glycerol ether (DBG) and dibenzyl ether (DBz) were identified as the main products. MBG was the major product of the reaction catalyzed by the microporous Z15c zeolite with low Si/Al molar ratio, whereas DBG was formed in higher yield with the use of microporous Z40c and hierarchical Z40c-H zeolites, both of them having a similar high Si/Al molar ratio (≈50). MBG is a value-added product and it is obtained with good yield and selectivity when using the conventional zeolite Z15c as a catalyst. Under the best conditions tested, i.e., 25 mg of catalyst for 8 h at 120 °C, a 62% of conversion was obtained without the need of solvent, with an excellent 84% selectivity toward the MBG and no formation of DBz.

Smart Monitoring Embedded Service for Energy-Efficient and Sustainable Management in Data Centers

Information technologies (IT) currently represent 2% of CO2 emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile required to support the model.

Electrocatalytic reduction of CO2 to formate using particulate Sn electrodes: Effect of metal loading and particle size

The development of electrochemical processes for the conversion of CO2 into value-added products allows innovative carbon capture & utilization (CCU) instead of carbon capture & storage (CCS). In addition, coupling this conversion with renewable energy sources would make it possible to chemically store electricity from these intermittent renewable sources. The electroreduction of CO2 to formate in aqueous solution has been performed using Sn particles deposited over a carbon support. The effect of the particle size and Sn metal loading has been evaluated using cyclic voltammetry and chronoamperometry. The selected electrode has been tested on an experimental filter-press type cell system for continuous and single pass CO2 electroreduction to obtain formate as main product at ambient pressure and temperature. Experimental results show that using electrodes with 0.75 mg Sn cm−2, 150 nm Sn particles, and working at a current density of 90 mA cm−2, it is possible to achieve rates of formate production over 3.2 mmol m−2 s−1 and faradaic efficiencies around 70% for 90 min of continuous operation. These experimental conditions allow formate concentrations of about 1.5 g L−1 to be obtained on a continuous mode and with a single pass of catholyte through the cell.

Dibujando la arquitectura olvidada: las defensas militares de la guerra de 1936-39 [PPT]

A decade before there was getting up the 'Atlantic Wall', there was executed a system of defenses along the Mediterranean coast in Spain (1936-39). The recovery of the same constructions (both of his graphical documents and of the constructed works that stay in foot) and his putting in value it can help to consolidate an own memory of the 20th century. This work considers to inventory, to measure and to draw the planes of these architectures to fix the memory that is diluted by the erosion of the time. The military pieces place in many borders: are these properly architecture? These are walking between two epochs: the one that perpetuates the epic acts in opposite to the one that shows the disasters in order that they do not forget. They are the most modern ruins of our history. In this process of reconstruction of the memory, there turns out to be crucial the graphical restitution. The drawing is a source of knowledge and demonstrates facts that were constructed.

Dibujando la arquitectura olvidada: las defensas militares de la guerra de 1936-39

Comunicación presentada en el XI Congreso Internacional de Expresión Gráfica Aplicada a la Edificación, APEGA 2012, Valencia, 29 noviemnre-1 diciembre 2012.

Muro Mediterráneo versus movimiento moderno

Una década antes de que fuera construido el Muro Atlántico fue ejecutado un sistema de defensas a lo largo de la costa del Mediterráneo español (1936-39). La recuperación de estas construcciones (de sus documentos gráficos) y su puesta en valor pueden ayudar a consolidar una memoria propia del siglo XX. Este trabajo consiste en inventariar, medir y dibujar los planos de estas arquitecturas a fin de fijar la memoria que se diluye por la erosión del tiempo. Estas defensas militares se sitúan en muchas fronteras: ¿son propiamente arquitectura o piezas industriales? ¿Son arquitectura moderna? Estas transitan entre dos mundos: uno que proyecta arquitecturas ligeras, flexibles y con caducidad frente a otro que construye obras compactas, rígidas y eternas. También se mueven por dos épocas: una que perpetúa las hazañas épicas frente a otras que muestra los desastres. Espacio, tiempo y materia. Son las ruinas de hormigón más modernas de nuestra historia que se encuentran camufladas en la topografía: templos y tumbas a la vez. En esta reconstrucción de la memoria, resulta crucial la restitución gráfica que es donde comienza el conocimiento.

Muro Mediterráneo: arquitecturas para la defensa de la Guerra de España (1936-1939)

Una década antes de que fuera construido el Muro Atlántico, fue ejecutado un sistema de defensas a lo largo de la costa del Mediterráneo español (1936-39). La recuperación de estas construcciones (de sus documentos gráficos y de las obras que existen) y su puesta en valor puede ayudar a consolidar una memoria propia del siglo XX. Las piezas militares se sitúan en muchas fronteras: ¿son estas defensas arquitectura o piezas industriales? ¿Son arquitectura moderna? Estas transitan entre dos mundos: uno que proyecta arquitecturas ligeras, flexibles y con caducidad frente a otro que construye obras compactas, rígidas y eternas. Espacio, tiempo y materia. Son las ruinas de hormigón más modernas de nuestra historia camufladas en la topografía: templos y tumbas a la vez.