Behavior of different soot combustion catalysts under NOx/O2. Importance of the catalyst–soot contact

Four different catalysts (Pt/Al2O3, Ce0.8Zr0.2O2, PrO2−x and SrTiCuO3) have been investigated on a laboratory scale to evaluate their potential as diesel soot combustion catalysts under different experimental conditions, which simulate the situation found in a continuous regeneration technology trap (dual-bed configuration of catalyst and soot) or a catalyst-coated filter system (single-bed configuration, both catalyst and soot particles mixed under loose-contact mode). Under dual-bed configuration, the behavior of the catalysts towards soot combustion are very similar, despite the differences observed in the NO2 production profiles. However, under single-bed configuration, there are important differences in the soot combustion activities and in the NO2 slip profiles. The configurations chosen have an enormous impact on CO/(CO + CO2) ratios of combustion products as well. The most active catalyst under NOx + O2 is PrO2−x combining a high contribution of active oxygen-assisted soot combustion as well as high NO2 production activity along the catalytic bed.

Isotopic study of ceria-catalyzed soot oxidation in the presence of NOx

The ceria-catalyzed soot oxidation mechanism has been studied by a pulse technique with labeled O2 in the absence and presence of NO, using ceria–soot mixtures prepared in the loose contact mode. In the absence of soot, the ceria-catalyzed oxidation of NO to NO2 takes place with ceria oxygen and not with gas-phase O2. However, the oxygen exchange process between gas-phase O2 and ceria oxygen (to yield back O2, but with oxygen atoms coming from ceria) prevailed with regard to the ceria-catalyzed oxidation of NO to NO2. Gas-phase O2 did not react directly with soot when pulsed to a soot–ceria loose contact mixture. Instead, ceria oxygen is transferred to soot (this step does not require gas-phase molecular oxygen to be present), and gas-phase O2 fills up the vacancies created on the oxide in a further step. The transfer of oxygen between ceria and soot occurred directly in the absence of NO. However, in the presence of NO, NO2 is expected to be additionally generated by ceria oxygen oxidation, which also reacts with soot. The main reaction products of the ceria-catalyzed soot oxidation reaction with NO/O2 were CO2 and NO. Additionally, evidence of the reduction of NOx to N2 was found.

Catalytic performance of CuO/Ce0.8Zr0.2O2 loaded onto SiC-DPF in NOx-assisted combustion of diesel soot

This work presents a comparative study between the catalytic performance of the 2% CuO/ceria-zirconia powder catalyst and the same catalyst supported on silicon carbide DPF (Diesel Particulate Filter) towards NO oxidation reaction and soot combustion reaction. The ceria-zirconia catalyst was prepared by the co-precipitation method and 2 wt% copper was incorporated by the incipient wetness impregnation method. The catalyst was incorporated onto the ceramic support using a simple and organic solvent-free procedure by a simply dipping the DPF into an aqueous solution of the catalyst. The powder catalyst has been characterized using N2 adsorption at −196 °C, XRD and Raman Spectroscopy; whereas the catalytic coating morphology has been evaluated by SEM and the mechanical stability by an adherence test. Both catalyst configurations were tested for NO oxidation to NO2 and for soot combustion under NOx/O2. The results revealed that incorporation of the very active copper/ceria-zirconia catalyst onto SiC-DPF has been successfully achieved by a simple coating procedure. Furthermore, the catalytic coating has shown suitable mechanical, chemical and thermal stability. A satisfactory catalytic performance of the catalytic-coated filter was reached towards the NO oxidation reaction. Moreover, it was proved that the catalytic coating is stable and the corresponding coated DPF can be reused for several cycles of NO oxidation without a significant decrease in its activity. Finally, it was verified that the loose-contact mode is a good choice to simulate the catalytic performance of this active phase in a real diesel particulate filter.

NOx storage and reduction over copper-based catalysts. Part 2: Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd)

5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) have been studied by rapid-scan operando DRIFTS for NOx Storage and Reduction (NSR) with high frequency (30 s) CO, H2 and 50%CO + 50%H2 micropulses. In the absence of reductant pulses, below 200–250 °C NOx was stored on the catalysts as nitrite and nitro groups, and above this temperature nitrates were the main species identified. The thermal stability of the NOx species stored on the catalysts depended on the acid/basic character of the dopant (M more acidic = NOx stored less stable ⇒ Zr4+ < none < Nd3+ < Pr3+ < La3+ ⇐ M more basic = NOx stored more stable). Catalysts regeneration was more efficient with H2 than with CO, and the CO + H2 mixture presented an intermediate behavior, but with smaller differences among the series of catalyst than observed using CO alone. N2 is the main NOx reduction product upon H2 regeneration. The highest NOx removal in NSR experiments performed at 400 °C with CO + H2 pulses was achieved with the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ) while the poorest performing catalyst was that with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ). The poor performance of CuO/Ce0.8Zr0.2Oδ in NSR experiments with CO pulses was attributed to its lower oxidation capacity compared to the other catalysts.

Removing noisy mentions for distant supervision

Los métodos para Extracción de Información basados en la Supervisión a Distancia se basan en usar tuplas correctas para adquirir menciones de esas tuplas, y así entrenar un sistema tradicional de extracción de información supervisado. En este artículo analizamos las fuentes de ruido en las menciones, y exploramos métodos sencillos para filtrar menciones ruidosas. Los resultados demuestran que combinando el filtrado de tuplas por frecuencia, la información mutua y la eliminación de menciones lejos de los centroides de sus respectivas etiquetas mejora los resultados de dos modelos de extracción de información significativamente.

Three-way catalysts: past, present and future

In this article, the past and the state-of-the-art in Three-Way Catalyst (TWC) technology are reviewed. The main chemical reactions occurring in a gasoline engine are discussed and also the main reactions taking place in a TWC placed in the tailpipe, namely CO and hydrocarbons oxidation and nitrogen oxides reduction to molecular nitrogen. The main components of a TWC (substrates, noble metals and cerium oxides) and their role in the different chemical reactions occurring in a TWC are described. Finally, the problem of diesel vehicles gas aftertratment is described, and the current state-of-the art in catalytic converters for these vehicles are commented.

Preparation, characterisation and testing of CuO/Ce0.8Zr0.2O2 catalysts for NO oxidation to NO2 and mild temperature diesel soot combustion

CuO/ceria-zirconia catalysts have been prepared, deeply characterised (N2 adsorption–desorption isotherms at −196 °C, XRD, Raman spectroscopy, XPS, TEM and H2-TPR) and tested for NO oxidation to NO2 in TPR conditions, and for soot combustion at mild temperature (400 °C) in a NOx/O2 stream. The behaviour has been compared to that of a reference Pt/alumina commercial catalyst. The ceria-zirconia support was prepared by the co-precipitation method, and different amounts of copper (0.5, 1, 2, 4 and 6 wt%) were loaded by incipient wetness impregnation. The results revealed that copper is well-dispersed onto the ceria-zirconia support for the catalysts with low copper loading and CuO particles were only identified by XRD in samples with 4 and 6% of copper. A very low loading of copper increases significantly the activity for the NO oxidation to NO2 with regard to the ceria-zirconia support and an optimum was found for a 4% CuO/ceria-zirconia composition, showing a very high activity (54% at 348 °C). The soot combustion rate at 400 °C obtained with the 2% CuO/ceria-zirconia catalyst is slightly lower to that of 1% Pt/alumina in terms of mass of catalyst but higher in terms of price of catalyst.

Synthetic Boron-Doped Diamond Electrodes for Electrochemical Water Treatment

Boron-doped diamond electrodes have emerged as anodic material due to their high physical, chemical and electrochemical stability. These characteristics make it particularly interesting for electrochemical wastewater treatments and especially due to its high overpotential for the Oxygen Evolution Reaction. Diamond electrodes present the maximum efficiency in pollutant removal in water, just limited by diffusion-controlled electrochemical kinetics. Results are presented for the elimination of benzoic acid and for the electrochemical treatment of synthetic tannery wastewater. The results indicate that diamond electrodes exhibit the best performance for the removal of total phenols, COD, TOC, and colour.

Proyecto FIRST (Flexible Interactive Reading Support Tool): desarrollo de una herramienta para ayudar a personas con autismo mediante la simplificación de textos

El Trastorno de Espectro Autista (TEA) es un trastorno que impide el correcto desarrollo de funciones cognitivas, habilidades sociales y comunicativas en las personas. Un porcentaje significativo de personas con autismo presentan además dificultades en la comprensión lectora. El proyecto europeo FIRST está orientado a desarrollar una herramienta multilingüe llamada Open Book que utiliza Tecnologías del Lenguaje Humano para identificar obstáculos que dificultan la comprensión lectora de un documento. La herramienta ayuda a cuidadores y personas con autismo transformando documentos escritos a un formato más sencillo mediante la eliminación de dichos obstáculos identificados en el texto. En este artículo se presenta el proyecto FIRST así como la herramienta desarrollada Open Book.

Evaluation of hectorites, synthesized in different conditions, as soot combustion catalysts after impregnation with copper

Two microporous hectorites were prepared by conventional and microwave heating, and a delaminated mesoporous hectorite by an ultrasound-assisted synthesis. These three hectorites were impregnated with copper. The characterization techniques used were XRD, N2 adsorption, TEM and H2 reduction after selective surface copper oxidation by N2O (to determine copper dispersion). The catalytic activity for soot combustion of the copper-free and the copper-containing hectorites was tested under a gas mixture of 500 ppm NOx/5% O2/N2 (and 5% O2/N2 in some cases), evaluating their stability through three consecutive soot combustion experiments. The delaminated hectorite showed the highest surface area (353 m2/g) allowing the highest dispersion of copper. This copper-containing catalyst was the most active for soot combustion among those prepared and tested in this study. We have also concluded that the Cu/hectorite-catalyzed soot combustion mechanism is based on the activation of the O2 molecule and not on the NO2-assisted soot combustion.

¿Sigue la Agencia Europea del Medicamento sus propias reglas? Cuento con moraleja

Antecedentes/Objetivos: Los sesgos de género en los ensayos clínicos (EC) se demostraron ya en los 90. Objetivo: analizar el cumplimiento del Informe Público Europeo de Evaluación (EPAR) de anticonceptivos y fármacos para la disfunción eréctil (FDE) realizado por la Agencia Europea de Medicamentos (EMA) respecto a sus recomendaciones de elaboración. Métodos: Análisis del contenido sobre eficacia, seguridad, farmacocinética (FC) y farmacodinámica (FD) del EPAR de 3 anticonceptivos y 3 FDE, y de sus fichas técnicas. Fuente de información: Base de datos de EMA. Descriptores: “erectile dysfunction” y “contraception”. Criterios exclusión: fármacos no autorizados, genéricos, que presenten el mismo informe. Resultados: Los EPAR de FDE no aportan datos del nº de EC de seguridad de Viagra, ni de las fases de 3 de los 11 EC de Levitra. Faltan datos sobre fases de 2 de los 6 EC de eficacia de Viagra. Ni datos de absorción de Cialis y Levitra sobre biodisponibilidad absoluta y relativa (salvo en 2º EPAR de Levitra). No datos de interacción alimentaria de Cialis. El EPAR del anticonceptivo Zoely no aporta información de las fases de 4 de los 8 EC sobre seguridad. Eficacia bien descrita, excepto Zoely (no refleja datos de EC dosis-respuesta, respecto a evidencia preliminar de eficacia, y de plan y dosis recomendada). En FD: Faltan datos de Zoely y EllaOne sobre concentración plasmática y efecto, comparación placebo o medicamento de referencia, EC para tipos concretos de efectos adversos, e interacciones con medicamentos. En Zoely no coincide la dosis estudiada con la autorizada. No datos de las fases de los EC de FC de EVRA y EllaOne, ni de 1/6 EC de Zoely. Hay datos de interacciones alimentarias en todos los anticonceptivos, pero no de absorción, respecto biodisponibilidad absoluta ni relativa. La información de eliminación es reflejada, excepto en el aclaramiento y vida media de Zoely. El nº de EC de las interacciones con otros fármacos fue < en los anticonceptivos respeto a los FDE. Las reacciones adversas (RAM) en los EPAR son más frecuentes en anticonceptivos (Evra: 80%, EllaOne: 79%, Zoely: 75%) que en FDE (Viagra: 65%, Cialis: 66,7%, Levitra: 64,3%). Hay RAM en los EPAR que no aparecen en su ficha técnica (EVRA: 4, EllaOne: 10, Zoely: 3, 2º EPAR Cialis: 6, 2º EPAR Levitra: 1). Conclusiones: La EMA no sigue sus propias guías de elaboración del EPAR al recomendar la aprobación de la comercialización de FDE y anticonceptivos a la Comisión Europea con falta de datos relevantes sobre seguridad, FC y FD. Las diferencias observadas en los EPAR entre ambos tipos de fármacos, sugieren sesgos de género en la información sobre seguridad y FC.

Electrospinning of silica sub-microtubes mats with platinum nanoparticles for NO catalytic reduction

Silica sub-microtubes loaded with platinum nanoparticles have been prepared in flexible non-woven mats using co-axial electrospinning technique. A partially gelated sol made from tetraethyl orthosilicate was used as the silica precursor, and oil was used as the sacrificial template for the hollow channel generation. Platinum has been supported on the wall of the tubes just adding the metallic precursor to the sol–gel, thus obtaining the supported catalyst by one-pot method. The silica tubes have a high aspect ratio with external/internal diameters of 400/200 nm and well-dispersed platinum nanoparticles of around 2 nm. This catalyst showed a high NO conversion with very high selectivity to N2 at mild conditions in the presence of excess oxygen when using C3H6 as reducing agent. This relevant result reveals the potential of this technique to produce nanostructured catalysts onto easy to handle conformations.

Pirólisis y combustión de residuos electrónicos

Resumen de la comunicación presentada en el I Congreso de Estudiantes de Ingeniería Química de la Universidad de Alicante, 13-14 abril 2010.