Plastisol foaming process. Decomposition of the foaming agent, polymer behavior in the corresponding temperature range and resulting foam properties

The decomposition of azodicarbonamide, used as foaming agent in PVC—plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min−1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g−1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol−1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse.

Targetless image-based method for measuring displacements and strains on concrete surfaces with a consumer camera

Measurement of concrete strain through non-invasive methods is of great importance in civil engineering and structural analysis. Traditional methods use laser speckle and high quality cameras that may result too expensive for many applications. Here we present a method for measuring concrete deformations with a standard reflex camera and image processing for tracking objects in the concretes surface. Two different approaches are presented here. In the first one, on-purpose objects are drawn on the surface, while on the second one we track small defects on the surface due to air bubbles in the hardening process. The method has been tested on a concrete sample under several loading/unloading cycles. A stop-motion sequence of the process has been captured and analyzed. Results have been successfully compared with the values given by a strain gauge. Accuracy of our methods in tracking objects is below 8 μm, in the order of more expensive commercial devices.

Is financial instability male-driven? Gender and cognitive skills in experimental asset markets

The hypothesis that price stability would reliably increase with the fraction of women operating in financial markets has been frequently suggested in policy discussions. To test this hypothesis we conducted 10 male-only, 10 female-only and 10 mixed-gender experimental asset markets, and compared the effects of gender composition, confidence, risk attitude and cognitive skills. Male and female markets have comparable volatility and deviations from fundamentals, whereas mixed-gender markets are substantially more stable. On the other hand, higher average cognitive skills of the group are associated with reduced market volatility. Individual-level analysis shows that subjects with higher cognitive skills trade at prices closer to fundamental values and earn significantly higher profits; similarly, mixed markets exhibit lower mispricing, particularly for traders with lower cognitive skills. Our results are demonstrated to hold in other experimental asset market studies, suggesting that a mixed-gender composition reduces mispricing across different types of asset markets.