An approach for characterising the weathering behaviour of Flysch slopes applied to the carbonatic Flysch of Alicante (Spain)

Various studies indicate that most of the slope instabilities affecting Flysch heterogeneous rock masses are related to differential weathering of the lithologies that make up the slope. Therefore, the weathering characteristics of the intact rock are of great importance for the study of these types of slopes and their associated instability processes. The main aim of this study is to characterise the weathering properties of the different lithologies outcropping in the carbonatic Flysch of Alicante (Spain), in order to understand the effects of environmental weathering on them, following slope excavation. To this end, 151 strata samples obtained from 11 different slopes, 5–40 years old, were studied. The lithologies were identified and their mechanical characteristics obtained using field and laboratory tests. Additionally, the slaking properties of intact rocks were determined, and a classification system proposed based on the first and fifth slake cycles (Id1 and Id5 respectively) and an Index of Weathering (IW5), defined in the study. Information obtained from the laboratory and the field was used to characterise the weathering behaviour of the rocks. Furthermore, the slaking properties determined from laboratory tests were related to the in-situ weathering properties of rocks (i.e., the weathering profile, patterns and length, and weathering rate). The proposed relationship between laboratory test results, field data, and in-situ observations provides a useful tool for predicting the response of slopes to weathering after excavation during the preliminary stages of design.

Proposal of a New Parameter for the Weathering Characterization of Carbonate Flysch-Like Rock Masses: The Potential Degradation Index (PDI)

The susceptibility of clay bearing rocks to weathering (erosion and/or differential degradation) is known to influence the stability of heterogeneous slopes. However, not all of these rocks show the same behaviour, as there are considerable differences in the speed and type of weathering observed. As such, it is very important to establish relationships between behaviour quantified in a laboratory environment with that observed in the field. The slake durability test is the laboratory test most commonly used to evaluate the relationship between slaking behaviour and rock durability. However, it has a number of disadvantages; it does not account for changes in shape and size in fragments retained in the 2 mm sieve, nor does its most commonly used index (Id2) accurately reflect weathering behaviour observed in the field. The main aim of this paper is to propose a simple methodology for characterizing the weathering behaviour of carbonate lithologies that outcrop in heterogeneous rock masses (such as Flysch slopes), for use by practitioners. To this end, the Potential Degradation Index (PDI) is proposed. This is calculated using the fragment size distribution curves taken from material retained in the drum after each cycle of the slake durability test. The number of slaking cycles has also been increased to five. Through laboratory testing of 117 samples of carbonate rocks, extracted from strata in selected slopes, 6 different rock types were established based on their slaking behaviour, and corresponding to the different weathering behaviours observed in the field.

Triassic redbeds in the Malaguide Complex (Betic Cordillera — Spain): petrography, geochemistry and geodynamic implications

Sandstone petrography and mudstone mineralogy and geochemistry of Triassic mudstones and sandstones from continental redbeds of the Malaguide Complex (Betic Cordillera, southern Spain) provide useful information on provenance, palaeoclimate and geodynamics during the early stages of the Pangea break-up, and on their diagenetic evolution. The sandstones are quartzarenites to sub-litharenites, with minor lithic fragments and rare feldspars. The mudstone samples show a PAAS like elemental distribution. The samples likely record recycling processes from their metasedimentary basement rocks that significantly affected the weathering indices, and monitors cumulative effects, including a first cycle of weathering at the source rocks. Sandstone composition and chemical–mineralogical features of mudstones record a provenance derived from continental block and recycled orogen that were weathered under warm and episodically wet climate. Source areas were located towards the east of the present-day Malaguide outcrops, and were formed by fairly silicic rock types, made up mainly of Palaezoic metasedimentary rocks, similar to those of the Paleozoic underlying series, with subordinate contributions from magmatic–metamorphic sources, and a rare supply from mafic metavolcanic rocks. Clay-mineral distribution of mudstones is dominated by illite and illite/smectite mixed-layer that result from differences in provenance, weathering, and burial/temperature history. Illite crystallinity values, illitization of kaolinite, occurrence of typical authigenic minerals and apatite fission-track studies, coupled with a subsidence analysis of the whole Malaguide succession suggest burial depths of at least 4–6 km with temperatures of 140–160 °C, typical of the burial diagenetic stage, and confirm the Middle Miocene exhumation of the Betic Internal Domain tectonic stack topped by the Malaguide Complex.

Relationship between static and dynamic elastic modulus of calcarenite heated at different temperatures: the San Julián's stone

The San Julián’s stone is the main material used to build the most important historical buildings in Alicante city (Spain). This paper describes the analysis developed to obtain the relationship between the static and the dynamic modulus of this sedimentary rock heated at different temperatures. The rock specimens have been subjected to heating processes at different temperatures to produce different levels of weathering on 24 specimens. The static and dynamic modulus has been measured for every specimen by means of the ISRM standard and ultrasonic tests, respectively. Finally, two analytic formulas are proposed for the relationship between the static and the dynamic modulus for this stone. The results have been compared with some relationships proposed by different researchers for other types of rock. The expressions presented in this paper can be useful for the analysis, using non-destructive techniques, of the integrity level of historical constructions built with San Julián’s stone affected by fires.

Characterization of the instability mechanisms affecting slopes on carbonatic Flysch: Alicante (SE Spain), case study

The studied Flysch sequence of Alicante occupies a widely populated area crossed by main communication routes. The slopes existing on this area usually suffer slope instabilities that cause substantial damage and a very high maintenance cost. In order to assess the type of instability mechanisms affecting these heterogeneous carbonatic slopes, in this paper a wide inventory of 194 Flysch rock slopes has been performed, reporting the existing lithologies, their competence and their relative arrangement and the geometrical relationship between bedding and the slope and the associated instability mechanism. All these data have been jointly used for performing an instability mechanisms characterization. For systematically characterizing the wide type of complex rock exposures existing in the study area, they are divided into basic units referred as lithological pattern columns to which the different observed instability mechanisms are associated. Inventoried instability mechanisms are diverse and sometimes are combined with each other. Rockfalls are a very common instability mechanism associated to the differential weathering and sapping of the marly lithologies which are present in a wide number of geometrical combinations. The other instability mechanisms closely depend on the combination of the geometrical and lithological parameters. Therefore, this work provides a new basic tool which can be easily used during preliminary project stages for knowing the instability mechanisms which can affect rock slopes excavated on carbonatic Flysch heterogeneous geological formations.

Caracterización de los depósitos miocenos de la isla de Nueva Tabarca (Alicante) y su empleo como material de construcción en el patrimonio local

El presente trabajo muestra la caracterización en detalle de la secuencia estratigráfica de los depósitos miocenos de la isla de Nueva Tabarca, el empleo de estos materiales en el patrimonio arquitectónico de la isla y su comportamiento frente la degradación. En la serie miocena, a grandes rasgos, se definen tres tramos. El tramo inferior, rico en clastos dolomíticos, muestra una alternancia de arenitas y calcarenitas. El tramo intermedio corresponde a una sucesión de niveles de calcirruditas con laminación cruzada cuya parte superior está representada por un nivel de grandes bioclastos, rodolitos y arenitas de grano fino. El comienzo del último tramo está marcado por la presencia de varias superficies arenosas más litificadas sobre las que se sitúa un banco de arenitas de grano fino y laminación paralela. Si bien las canteras extraían sillares de todas estas litofacies, existe una mayor extracción de los últimos niveles de la serie. Estas rocas presentan una durabilidad moderada-baja, degradándose fácilmente mediante arenización, escamación y/o alveolización.

Estudio de los mecanismos de inestabilidad en taludes y laderas del Flysch carbonatado de Alicante

Este trabajo de investigación, centrado en el Flysch carbonatado de Alicante, tiene como objetivos principales caracterizar los mecanismos de inestabilidad que afectan a los taludes de estas formaciones carbonatas heterogéneas, evaluar las medidas correctivas implementadas, y por último, caracterizar comportamiento diferencial frente a la degradación ambiental de las diferentes litologías aflorantes. Para ello, se ha realizado un extenso inventario de 194 taludes, permitiendo generar una base de datos que incluye las litologías, su competencia y la posición relativa entre ellas, las relaciones geométricas entre talud y estratificación y los mecanismos de inestabilidad asociados. También se han inventariado las medidas correctivas observadas y la valoración de su efectividad, ligadas al tipo de afloramiento y sus inestabilidades asociadas. Asimismo, se ha caracterizado el comportamiento frente al slaking de la roca matriz a través de cinco ciclos de slake, basado en los índices Id1, Id5, y en el Index of Weathering propuesto (IW5). Estos parámetros, junto con la identificación litológica y las propiedades mecánicas de las litologías representativas de la zona de estudio han permitido caracterizar su comportamiento frente a la degradación ambiental, que además ha sido relacionado con los patrones, longitudes y tasas de degradación observados in situ. Como resultado de lo anteriormente expuesto, este trabajo proporciona unas nuevas herramientas básicas, que pueden utilizarse fácilmente en fases de anteproyecto, para conocer los mecanismos de inestabilidad, el comportamiento frente a la degradación ambiental, así como recomendar las medidas correctivas adecuadas en estos taludes, u otros de características similares.

Compositional signatures of the Cenozoic sedimentary succesions of the Malaguide Complex (Betic Cordillera, Spain)

The studied Cenozoic sedimentary successions consist of deposits from continental/shallow-water to deep-marine environments of the Malaguide Complex (Betic Cordillera) outcropping in the Sierra Espuña area (SE Spain). The aim of this study is to characterize the composition, source area(s) provenance and weathering processes of these sedimentary successions from the pre-orogenic (Paleocene-Early Oligocene) to the syn-orogenic (Late Oligocene-Early Miocene) stage using petrological and geochemical methodologies. The studied sandstones are mainly quartzolithic with abundant metamorphic and sedimentary lithic fragments. In particular, the composition of samples from the pre-orogenic cycle is mainly carbonate with important siliciclastic components that occur within the medium to fine grained arenites. The composition of samples from the syn-orogenic cycle is characterized by a sharp change from carbonate to siliciclastic terms. Thus, the composition of the overall sandstone samples is very heterogeneous and suggests a source area mainly characterized by the Malaguide basement and lower units of the Internal Betic Zone, that partially compose the Mesomediterranean Microplate. The geochemical proxies suggest a provenance mainly from felsic source area with a minor supply from mafic rocks in some samples of the syn-orogenic stage. Furthermore, palaeoweathering indices indicate low to moderate weathering conditions for the sources. The Cenozoic sedimentary successions of the Malaguide Complex played an important role in the geodynamic evolution of the Betic Cordillera that represents the key tectonic element of the western domains of the Mesomediterranean Microplate.

Thermodynamic calculations for the salt crystallisation damage in porous built heritage using PHREEQC

This work considers the crystallisation mechanisms of the most common and aggressive salts that generate stress in porous building stones as a result of changing ambient conditions. These mechanisms include the salt crystallisation that result from decreasing relative humidity and changes in temperature and, in hydrated salts, the dissolution of the lower hydrated form and the subsequent precipitation of the hydrated salt. We propose a new methodology for thermodynamic calculations using PHREEQC that includes these crystallisation mechanisms. This approach permits the calculation of the equilibrium relative humidity and the parameterization of the critical relative humidity and crystallisation pressures for the dissolution–precipitation transitions. The influence of other salts on the effectives of salt crystallisation and chemical weathering is also assessed. We review the sodium and magnesium sulphate and sodium chloride systems, in both single and multicomponent solutions, and they are compared to the sodium carbonate and calcium carbonate systems. The variation of crystallisation pressure, the formation of new minerals and the chemical dissolution by the presence of other salts is also evaluated. Results for hydrated salt systems show that high crystallisation pressures are possible as lower hydrated salts dissolve and more hydrated salts precipitate. High stresses may be also produced by decreasing temperature, although it requires that porous materials are wet for long periods of time. The presence of other salts changes the temperature and relative humidity of salt transitions that generates stress rather than reducing the pressure of crystallisation, if any salt has previously precipitated. Several practical conclusions derive from proposed methodology and provide conservators and architects with information on the potential weathering activity of soluble salts. Furthermore, the model calculations might be coupled with projections of future climate to give as improved understanding of the likely changes in the frequency of phase transitions in salts within porous stone.