Characterization of the instability mechanisms affecting slopes on carbonatic Flysch: Alicante (SE Spain), case study

The studied Flysch sequence of Alicante occupies a widely populated area crossed by main communication routes. The slopes existing on this area usually suffer slope instabilities that cause substantial damage and a very high maintenance cost. In order to assess the type of instability mechanisms affecting these heterogeneous carbonatic slopes, in this paper a wide inventory of 194 Flysch rock slopes has been performed, reporting the existing lithologies, their competence and their relative arrangement and the geometrical relationship between bedding and the slope and the associated instability mechanism. All these data have been jointly used for performing an instability mechanisms characterization. For systematically characterizing the wide type of complex rock exposures existing in the study area, they are divided into basic units referred as lithological pattern columns to which the different observed instability mechanisms are associated. Inventoried instability mechanisms are diverse and sometimes are combined with each other. Rockfalls are a very common instability mechanism associated to the differential weathering and sapping of the marly lithologies which are present in a wide number of geometrical combinations. The other instability mechanisms closely depend on the combination of the geometrical and lithological parameters. Therefore, this work provides a new basic tool which can be easily used during preliminary project stages for knowing the instability mechanisms which can affect rock slopes excavated on carbonatic Flysch heterogeneous geological formations.

An approach for characterising the weathering behaviour of Flysch slopes applied to the carbonatic Flysch of Alicante (Spain)

Various studies indicate that most of the slope instabilities affecting Flysch heterogeneous rock masses are related to differential weathering of the lithologies that make up the slope. Therefore, the weathering characteristics of the intact rock are of great importance for the study of these types of slopes and their associated instability processes. The main aim of this study is to characterise the weathering properties of the different lithologies outcropping in the carbonatic Flysch of Alicante (Spain), in order to understand the effects of environmental weathering on them, following slope excavation. To this end, 151 strata samples obtained from 11 different slopes, 5–40 years old, were studied. The lithologies were identified and their mechanical characteristics obtained using field and laboratory tests. Additionally, the slaking properties of intact rocks were determined, and a classification system proposed based on the first and fifth slake cycles (Id1 and Id5 respectively) and an Index of Weathering (IW5), defined in the study. Information obtained from the laboratory and the field was used to characterise the weathering behaviour of the rocks. Furthermore, the slaking properties determined from laboratory tests were related to the in-situ weathering properties of rocks (i.e., the weathering profile, patterns and length, and weathering rate). The proposed relationship between laboratory test results, field data, and in-situ observations provides a useful tool for predicting the response of slopes to weathering after excavation during the preliminary stages of design.

Characterization of rock slopes through slope mass rating using 3D point clouds

Rock mass classification systems are widely used tools for assessing the stability of rock slopes. Their calculation requires the prior quantification of several parameters during conventional fieldwork campaigns, such as the orientation of the discontinuity sets, the main properties of the existing discontinuities and the geo-mechanical characterization of the intact rock mass, which can be time-consuming and an often risky task. Conversely, the use of relatively new remote sensing data for modelling the rock mass surface by means of 3D point clouds is changing the current investigation strategies in different rock slope engineering applications. In this paper, the main practical issues affecting the application of Slope Mass Rating (SMR) for the characterization of rock slopes from 3D point clouds are reviewed, using three case studies from an end-user point of view. To this end, the SMR adjustment factors, which were calculated from different sources of information and processes, using the different softwares, are compared with those calculated using conventional fieldwork data. In the presented analysis, special attention is paid to the differences between the SMR indexes derived from the 3D point cloud and conventional field work approaches, the main factors that determine the quality of the data and some recognized practical issues. Finally, the reliability of Slope Mass Rating for the characterization of rocky slopes is highlighted.

Evaluación de la susceptibilidad de las laderas a sufrir inestabilidades inducidas por terremotos: aplicación a la cuenca de drenaje del río Serpis (provincia de Alicante)

Se ha realizado un análisis para estimar la susceptibilidad de las laderas, en suelos de la cuenca de drenaje del río Serpis, a sufrir inestabilidades inducidas por terremotos. Para ello, se ha utilizado el denominado método de Newmark, que ha sido convenientemente modificado para contemplar la variabilidad que, de forma natural, se observa en las propiedades geotécnicas de los materiales. En el cálculo, se ha efectuado una simulación Monte Carlo, donde todas las propiedades geotécnicas que intervienen son tratadas como variables aleatorias. Los resultados obtenidos están expresados como probabilidad de que la aceleración crítica del talud sea menor o igual que 0.1g. Las susceptibilidades más elevadas se observan cuando los materiales están secos, pero en tal caso la extensión de territorio afectado es pequeña. En cambio, cuando el suelo está saturado se observa que gran parte del territorio presenta susceptibilidad Media o Baja, incluso con pendientes de 6 – 10º, frente a susceptibilidad Muy Baja – Nula, que los caracteriza cuando se encuentra seco. Se ha analizado también la posición de las zonas de mayor susceptibilidad con respecto a elementos constructivos existentes en el área.

Procedimiento gráfico para la obtención de los parámetros de corrección del SMR a través de la proyección estereográfica

El Slope Mass Rating (SMR, Romana, 1985) constituye una clasificación geomecánica de uso muy extendido para la caracterización de taludes en roca. Se obtiene por adición al índice RMR básico, calculado a partir de valores característicos del macizo rocoso, de una serie de factores de corrección dependientes del paralelismo discontinuidad-talud, del buzamiento de las discontinuidades, del buzamiento relativo entre las discontinuidades y el talud, así como del método de excavación empleado. En este trabajo se propone un método gráfico que permite obtener los parámetros de corrección del SMR (F1, F2 y F3) representando en proyección estereográfica los planos de discontinuidad y del talud a estudiar.

Evolution of conducting channels in metallic atomic contacts under elastic deformation

We investigate both experimentally and theoretically the evolution of conductance in metallic one-atom contacts under elastic deformation. While simple metals like Au exhibit almost constant conductance plateaus, Al and Pb show inclined plateaus with positive and negative slopes. It is shown how these behaviors can be understood in terms of the orbital structure of the atoms forming the contact. This analysis provides further insight into the issue of conductance quantization in metallic contacts revealing important aspects of their atomic and electronic structures.

Contribution à l’étude de la thérophytisation des matorrals des versants sud des monts de Tlemcen (Algérie occidentale)

La zone sur laquelle porte notre contribution est localisée dans le Nord-Ouest Algérien. Cette étude est consacrée à l’analyse de la diversité biologique et la dynamique des formations végétales des matorrals des versants sud des monts de Tlemcen. L’utilisation de la méthode aire-espèce de Braun Blanquet nous a permis de dégager une liste de 149 espèces à partir de 150 relevés fl oristiques effectués sur l’ensemble des stations d’étude. 4,69 % des espèces appartiennent aux for mations forestières et pré-forestières, avec une hauteur n’excédant pas 2 mètres; 13,42 % aux matorrals et 81,87 % aux pelouses. La conjugaison des facteurs de dégradation a entrainé une perturbation des écosystèmes locaux accompagnée d’une régression des aires de répartition de nombreux taxons. Deux facteurs majeurs peuvent être évoqués : – amplifi cation de l’impact humain lié à l’utilisation anarchique des écosystèmes (défrichement; coupe; surpâturages; bois de chauffe), – péjorations climatiques. L’analyse statistique des spectres biologiques nous a permis de mettre en évidence les modifications de la flore le long d’un gradient dynamique: forêt – pré forêt – matorral – pelouse. Plus des 3/4 des espèces recensées dans la zone d’étude appartiennent aux thérophytes et aux hemicryptophytes.

Effects of landscape spatial heterogeneity on dryland restoration success. The combined role of site conditions and reforestation techniques in southeastern Spain

In occidental Europe, Spain is one of countries the most severely affected by desertification (Arnalds & Arsher 2000). Particularly, South-eastern Spain is considered as one of the most threatened areas by desertification in Mediterranean Europe (Vallejo 1997). In 2003, the Valencia Regional Forest Service implemented a restoration demonstration project in this area. The project site is a small catchment (25 ha) located in the Albatera municipality. The catchment is highly heterogeneous, with terraced slopes, south-facing slopes and north-facing slopes. The restoration strategy was based on planting evergreen trees and shrubs which can grow quickly after disturbances, and on field treatments aimed at maximizing water collection (micro-catchments, planting furrows), organic amendment (compost), and conservation (tree shelters, mulching). On south landscape unit, the whole category of restoration treatments was applied: water micro-catchment + Tubex tree shelters + mulching & compost, while on north landscape unit: netting tree shelters + mulching & compost only were applied, while in terrace landscape unit: furrows + netting tree shelters + mulching & compost were applied. Survival and growth of the planted seedlings were used as metrics of restoration success. To assess the effects of the treatments applied for soil conservation, soil loss rates (from 2005 to 2009) were evaluated using the erosion pin method. We conclude that, despite the limiting conditions prevailing on the south unit, this landscape unit showed the highest survival and growth plant rates in the area. The best seedling performances on the south landscape unit were probably due to the highest technical efforts applied, consisting in the water micro-catchment installation and the Tubex plant shelters addition. In addition, soil loss rates followed decreasing trends throughout the assessment period. Soil loss rates were highest on south landscape unit in comparison with the other landscape units, due to the more accentuated relief. North landscape unit and terrace unit showed a net soil mass gain, probably reflecting the trapping of sediments produced by plantation works.

Assessment of corrective measures for alleviating slope instabilities in carbonatic Flysch formations: Alicante (SE of Spain) case study

As is well known, in order to select remediation measures to correct or prevent slope instabilities, it is essential to identify and characterize the instability mechanisms. This task is especially complex for heterogeneous rock masses such as Flysch formations. This paper addresses the assessment of corrective measures used in carbonate Flysch formations by classifying and grouping field data reported in an available database in order to associate this data with various instability mechanisms and stratigraphic column types as well as with the corrective measures taken to stabilise them. For this purpose, 194 slopes have been geomechanically characterized, mainly by considering the observed instability mechanisms. The corrective measures that were applied have been evaluated for their suitability and performance, and, if applicable, the causes of their malfunction have been also studied. As a result, some guidelines based on the observed behaviour and the suitability of the correction measure as a function of instability type are proposed for similar slopes.

Drought and grazing combined: Contrasting shifts in plant interactions at species pair and community level

The combined effects of drought stress and grazing pressure on shaping plant–plant interactions are still poorly understood, while this combination is common in arid ecosystems. In this study we assessed the relative effect of grazing pressure and slope aspect (drought stress) on vegetation cover and soil functioning in semi-arid Mediterranean grassland–shrublands in southeastern Spain. Moreover, we linked these two stress factors to plant co-occurrence patterns at species-pair and community levels, by performing C-score analyses. Vegetation cover and soil functioning decreased with higher grazing pressure and more south-facing (drier) slopes. At the community level, plants at south-facing slopes were negatively associated at no grazing but positively associated at low grazing pressure and randomly associated at high grazing pressure. At north-facing slopes, grazing did not result in a shift in the direction of the association. In contrast, analysis of pairwise species co-occurrence patterns showed that the dominant species Stipa tenacissima and Anthyllis cytisoides shifted from excluding each other to co-occurring with increasing grazing pressure at north-facing slopes. Our findings highlight that for improved understanding of plant interactions along stress gradients, interactions between species pairs and interactions at the community level should be assessed, as these may reveal contrasting results.

Discontinuity spacing analysis in rock masses using 3D point clouds

The complete characterization of rock masses implies the acquisition of information of both, the materials which compose the rock mass and the discontinuities which divide the outcrop. Recent advances in the use of remote sensing techniques – such as Light Detection and Ranging (LiDAR) – allow the accurate and dense acquisition of 3D information that can be used for the characterization of discontinuities. This work presents a novel methodology which allows the calculation of the normal spacing of persistent and non-persistent discontinuity sets using 3D point cloud datasets considering the three dimensional relationships between clusters. This approach requires that the 3D dataset has been previously classified. This implies that discontinuity sets are previously extracted, every single point is labeled with its corresponding discontinuity set and every exposed planar surface is analytically calculated. Then, for each discontinuity set the method calculates the normal spacing between an exposed plane and its nearest one considering 3D space relationship. This link between planes is obtained calculating for every point its nearest point member of the same discontinuity set, which provides its nearest plane. This allows calculating the normal spacing for every plane. Finally, the normal spacing is calculated as the mean value of all the normal spacings for each discontinuity set. The methodology is validated through three cases of study using synthetic data and 3D laser scanning datasets. The first case illustrates the fundamentals and the performance of the proposed methodology. The second and the third cases of study correspond to two rock slopes for which datasets were acquired using a 3D laser scanner. The second case study has shown that results obtained from the traditional and the proposed approaches are reasonably similar. Nevertheless, a discrepancy between both approaches has been found when the exposed planes members of a discontinuity set were hard to identify and when the planes pairing was difficult to establish during the fieldwork campaign. The third case study also has evidenced that when the number of identified exposed planes is high, the calculated normal spacing using the proposed approach is minor than those using the traditional approach.

Seismically-induced landslides by a low-magnitude earthquake: The Mw 4.7 Ossa De Montiel event (central Spain)

The Ossa de Montiel (2015/02/23, Mw 4.7) earthquake struck the central part of Spain and was felt far from the epicenter (> 300 km). Even though ground shaking was slight (Imax = V, EMS-98 scale), the earthquake triggered many small rock falls, most at distances of 20–30 km from the epicenter, greater than previously recorded in S Spain (16 km) for earthquakes of similar magnitudes. The comparative analysis of available data for this event with records from other quakes of the Betic cordillera (S and SE Spain) seems to indicate a slower pattern of ground-motion attenuation in central Spain. This could explain why slope instabilities occurred at larger distances. Instability was more frequent, and occurred at larger distances, in road cuts than in natural slopes, implying that such slope types are highly susceptible to seismically induced landslides.

SMR analysis using 3DPC datasets

Datasets and results of the paper: Characterization of rock slopes through slope mass rating using 3D point clouds, Riquelme et al 2016, IJRMMS.

Proposal of a New Parameter for the Weathering Characterization of Carbonate Flysch-Like Rock Masses: The Potential Degradation Index (PDI)

The susceptibility of clay bearing rocks to weathering (erosion and/or differential degradation) is known to influence the stability of heterogeneous slopes. However, not all of these rocks show the same behaviour, as there are considerable differences in the speed and type of weathering observed. As such, it is very important to establish relationships between behaviour quantified in a laboratory environment with that observed in the field. The slake durability test is the laboratory test most commonly used to evaluate the relationship between slaking behaviour and rock durability. However, it has a number of disadvantages; it does not account for changes in shape and size in fragments retained in the 2 mm sieve, nor does its most commonly used index (Id2) accurately reflect weathering behaviour observed in the field. The main aim of this paper is to propose a simple methodology for characterizing the weathering behaviour of carbonate lithologies that outcrop in heterogeneous rock masses (such as Flysch slopes), for use by practitioners. To this end, the Potential Degradation Index (PDI) is proposed. This is calculated using the fragment size distribution curves taken from material retained in the drum after each cycle of the slake durability test. The number of slaking cycles has also been increased to five. Through laboratory testing of 117 samples of carbonate rocks, extracted from strata in selected slopes, 6 different rock types were established based on their slaking behaviour, and corresponding to the different weathering behaviours observed in the field.