Thermogravimetric analysis of the pyrolysis of several materials used in the preparation of commercial cigarettes

Comunicación presentada en forma de póster en el "12th Mediterranean Congress of Chemical Engineering", Barcelona (Spain), November 15-18, 2011

Effect of the porous structure in carbon materials for CO2 capture at atmospheric and high-pressure

Activated carbons prepared from petroleum pitch and using KOH as activating agent exhibit an excellent behavior in CO2 capture both at atmospheric (∼168 mg CO2/g at 298 K) and high pressure (∼1500 mg CO2/g at 298 K and 4.5 MPa). However, an exhaustive evaluation of the adsorption process shows that the optimum carbon structure, in terms of adsorption capacity, depends on the final application. Whereas narrow micropores (pores below 0.6 nm) govern the sorption behavior at 0.1 MPa, large micropores/small mesopores (pores below 2.0–3.0 nm) govern the sorption behavior at high pressure (4.5 MPa). Consequently, an optimum sorbent exhibiting a high working capacity for high pressure applications, e.g., pressure-swing adsorption units, will require a poorly-developed narrow microporous structure together with a highly-developed wide microporous and small mesoporous network. The appropriate design of the preparation conditions gives rise to carbon materials with an extremely high delivery capacity ∼1388 mg CO2/g between 4.5 MPa and 0.1 MPa. Consequently, this study provides guidelines for the design of carbon materials with an improved ability to remove carbon dioxide from the environment at atmospheric and high pressure.

Some isolates of the nematophagous fungus Pochonia chlamydosporia promote root growth and reduce flowering time of tomato

The fungal parasite of nematode eggs Pochonia chlamydosporia is also a root endophyte known to promote growth of some plants. In this study, we analysed the effect of nine P. chlamydosporia isolates from worldwide origin on tomato growth. Experiments were performed at different scales (Petri dish, growth chamber and greenhouse conditions) and developmental stages (seedlings, plantlets and plants). Seven P. chlamydosporia isolates significantly (P < 0.05) increased the number of secondary roots and six of those increased total weight of tomato seedlings. Six P. chlamydosporia isolates also increased root weight of tomato plantlets. Root colonisation varied between different isolates of this fungus. Again P. chlamydosporia significantly increased root growth of tomato plants under greenhouse conditions and reduced flowering and fruiting times (up to 5 and 12 days, respectively) versus uninoculated tomato plants. P. chlamydosporia increased mature fruit weight in tomato plants. The basis of the mechanisms for growth, flowering and yield promotion in tomato by the fungus are unknown. However, we found that P. chlamydosporia can produce Indole-3-acetic acid and solubilise mineral phosphate. These results suggest that plant hormones or nutrient ability could play an important role. Our results put forward the agronomic importance of P. chlamydosporia as biocontrol agent of plant parasitic nematodes with tomato growth promoting capabilities.

Building from building waste: The development of an instrument to determine the circularity of materials from the existing building stock in order to maximise high quality reuse

On a global level the population growth and increase of the middle class lead to a growing demand on material resources. The built environment has an enormous impact on this scarcity. In addition, a surplus of construction and demolition waste is a common problem. The construction industry claims to recycle 95% of this waste but this is in fact mainly downcycling. Towards the circular economy, the quality of reuse becomes of increasing importance. Buildings are material warehouses that can contribute to this high quality reuse. However, several aspects to achieve this are unknown and a need for more insight into the potential for high quality reuse of building materials exists. Therefore an instrument has been developed that determines the circularity of construction waste in order to maximise high quality reuse. The instrument is based on three principles: ‘product and material flows in the end of life phase’, ‘future value of secondary materials and products’ and ‘the success of repetition in a new life cycle’. These principles are further divided into a number of criteria to which values and weighting factors are assigned. A degree of circularity can then be determined as a percentage. A case study for a typical 70s building is carried out. For concrete, the circularity is increased from 25% to 50% by mapping out the potential for high quality reuse. During the development of the instrument it was clarified that some criteria are difficult to measure. Accurate and reliable data are limited and assumptions had to be made. To increase the reliability of the instrument, experts have reviewed the instrument several times. In the long-term, the instrument can be used as a tool for quantitative research to reduce the amount of construction and demolition waste and contribute to the reduction of raw material scarcity.