On-line microwave-based preconcentration device for inductively coupled plasma atomic emission spectrometry: Application to the elemental analysis of spirit samples

A microwave-based thermal nebulizer (MWTN) has been employed for the first time as on-line preconcentration device in inductively coupled plasma atomic emission spectrometry (ICP-AES). By the appropriate selection of the experimental conditions, the MWTN could be either operated as a conventional thermal nebulizer or as on-line analyte preconcentration and nebulization device. Thus, when operating at microwave power values above 100 W and highly concentrated alcohol solutions, the amount of energy per solvent mass liquid unit (EMR) is high enough to completely evaporate the solvent inside the system and, as a consequence, the analyte is deposited (and then preconcentrated) on the inner walls of the MWTN capillary. When reducing the EMR to the appropriate value (e.g., by reducing the microwave power at a constant sample uptake rate) the retained analyte is swept along by the liquid-gas stream and an analyte-enriched aerosol is generated and next introduced into the plasma cell. Emission signals obtained with the MWTN operating in preconcentration-nebulization mode improved when increasing preconcentration time and sample uptake rate as well as when decreasing the nozzle inner diameter. When running with pure ethanol solution at its optimum experimental conditions, the MWTN in preconcentration-nebulization mode afforded limits of detection up to one order of magnitude lowers than those obtained operating the MWTN exclusively as a nebulizer. To validate the method, the multi-element analysis (i.e. Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Pb and Zn) of different commercial spirit samples in ICP-AES has been performed. Analyte recoveries for all the elements studied ranged between 93% and 107% and the dynamic linear range covered up to 4 orders of magnitude (i.e. from 0.1 to 1000 μg L−1). In these analysis, both MWTN operating modes afforded similar results. Nevertheless, the preconcentration-nebulization mode permits to determine a higher number of analytes due to its higher detection capabilities.

Motivational profiles Spanish students of Compulsory Secondary Education: Differential analysis of academic self-attributions

Academic goals and academic self-attributions are relevant variables in school settings. The objective of this study is to identify whether there are combinations of multiple goals that lead to different motivational profiles and to determine whether there are significant differences between the groups obtained regarding causal attributions of success and failure (ability, effort, or external causes) in Mathematics and Language and Literature, and in overall academic performance. The Goal Achievement Tendencies Questionnaire (AGTQ) and the Sydney Attribution Scale (SAS) were administered to a sample of 2022 students of compulsory secondary education, ranging in age from 12 to 16 years (M = 13.81, SD = 1.35). Cluster analysis identified four motivational profiles: a group of students with a high generalized motivation profile, a group of students with low generalized motivation profile, a group of students with predominance of learning goals and achievement goals, and a final group of students with predominance of social reinforcement goals. Results revealed statistically significant differences between the profiles obtained in academic self-attributions.

Análisis de la carga interna en los entrenamientos de fútbol sala femenino de 1ª división nacional

El objetivo de este estudio es analizar la frecuencia cardiaca (FC) y la percepción subjetiva del esfuerzo (RPE) en los entrenamientos de fútbol sala en jugadoras (25.42±4.42 años, 166.57±7.14 cm, 56.50±4.95 kg y 22.23±0.97 IMC) de un equipo de primera división de la liga nacional española. Se registraron, mediante monitores de ritmo cardiaco y la escala de Foster, ocho sesiones de entrenamiento de tipo técnico-táctico, físico y partidos modificados, distribuidas durante la mitad de la temporada. Los resultados de la FC máxima y media obtenida son 174.03±4.15 y 128.29±0.81 ppm en sesiones técnico-tácticas, 179.75±2.05 y 132±2.12 ppm en sesiones físicas, 180.99±1.06 y 133.63±5.52 ppm en partidos modificados, respectivamente. Habiendo diferencias significativas en los resultados de la FC máxima entre las sesiones técnico-tácticas y los partidos modificados (p=0.03) y entre la sesiones físicas y las técnico-tácticas (p=0.04). En cuanto a los resultados de la carga de entrenamiento y la RPE en las sesiones técnico-tácticas son 381.22±16.42 y 6.21±0.12 rpe, en las sesiones físicas 533.25±5.59 y 7.90±0.0 rpe, y en los partidos modificados 531.18±4.21 y 7.97±0.22 rpe, respectivamente. Encontrando diferencias significativas entre los resultados de la RPE y la magnitud de la carga de entrenamiento de las sesiones técnico-tácticas y los partidos modificados (p=0.00) y entre la sesiones físicas y las técnico-tácticas (p=0.00). Estos resultados muestran que la sesión de partido modificado obtiene unos valores de frecuencia cardiaca y de percepción subjetiva del esfuerzo mayor que las sesiones técnico-tácticas y las de trabajo físico.

Goal Orientation Profiles and Self-Concept of Secondary School Students

The objective of this study is to identify possible combinations of multiple goals that lead to different goal orientation profiles and to determine whether there are significant group differences in self-concept dimensions. The Achievement Goals Tendencies Questionnaire (AGTQ) and the Self-Description Questionnaire-II (SDQ-II) were administered to a sample of 2,022 students of Compulsory Secondary education, ranging in age from 12 to 16 years (M = 13.81, SD = 1.35). Cluster analysis identified four profiles of motivational goals: a group of students with a generalized high motivation profile, a group of students with generalized low motivation profile, a group of students with a predominance of learning goals and achievement goals, and a last group of students with a predominance of achievement goals and social reinforcement goals. Results reveal statistically significant differences among the profiles obtained regarding self-concept dimensions.

Influence of sludge retention time on filtration performance and biomass characteristics in a hollow fiber membrane bioreactor

In this study, the filtration process and the biomass characteristics in a laboratory-scale submerged membrane bioreactor (MBR) equipped with a hollow fiber (HF) microfiltration membrane were studied at different solid retention times (SRT). The MBR was fed by synthetic wastewater and the organic loading rate (OLR) was 0.5, 0.2, 0.1, and 0.08 kg COD kg VSS−1 d−1 for 10, 30, 60, and 90 days of SRT, respectively. The hydraulic retention time was 8.4 h and the permeate flux was 6 L m−2 h−1(LMH). Data analysis confirmed that at all the studied SRTs, the HF-MBR operated very good obtaining of high quality permeates. Chemical Oxygen Demand (COD) removal efficiencies were higher than 95%. The best filtration performance was reached at SRT of 30 d. On the other hand, the respirometric analysis showed that biomass was more active and there was more biomass production at low SRTs. The concentration of soluble extracellular polymeric substances (EPS) decreased with increasing SRT. A decrease of soluble EPS caused a decrease of membrane fouling rate, decreasing the frequency of chemical cleanings. The floc size decreased with SRT increasing. At high SRTs, there was more friction among particles due to the increase of the cellular density and the flocs broke decreasing their size.