Registro de excentricidad de alta frecuencia en los sedimentos continentales de la Cuenca de Guadix (Cordillera Bética, España)

Los sedimentos continentales (Plioceno-Cuaternario) que afloran en el sector central de la Cuenca de Guadix (Sur de España) muestran una ciclicidad de 100 ka consistente en la alternancia de depósitos de abanicos aluviales y sedimentos fluvio-lacustres. Durante el Plioceno y el Pleistoceno la Cuenca de Guadix era endorreica, y se caracterizaba por la existencia de un sistema axial fluvial y una orla marginal de abanicos aluviales transversales. En la zona de estudio, estos sistemas estaban relacionados lateralmente, ocupando de forma alterna el valle axial en el sector central de la Cuenca de Guadix. La edad estimada para la alternancia, ca. 100 ka, cae en la banda de excentricidad de alta frecuencia de Milankovitch. Estas fases podrían interpretarse como el resultado de máximos de excentricidad (inviernos más largos y fríos, con mayor volumen de precipitaciones que favorecerían las progradaciones de los abanicos) o de excentricidad mínima (períodos más secos y fríos, con una cubierta vegetal más escasa en las áreas fuente y, por tanto, un mayor aporte de sedimento por precipitaciones muy concentradas en el tiempo al sistema aluvial). Se muestra cómo los datos paleomagnéticos no son lo suficientemente precisos para proporcionar una buena correlación de las fases de progradación con la curva de excentricidad de Laskar et al. (2004), por lo que se pone en duda su precisión a la hora de determinar el significado climático de la ciclicidad.

3D geometry of growth strata in a fault-propagation fold: insights into space–time evolution of the Crevillente Fault (Abanilla-Alicante sector), Betic Cordillera, Spain

This work presents a 3D geometric model of growth strata cropping out in a fault-propagation fold associated with the Crevillente Fault (Abanilla-Alicante sector) from the Bajo Segura Basin (eastern Betic Cordillera, southern Spain). The analysis of this 3D model enables us to unravel the along-strike and along-section variations of the growth strata, providing constraints to assess the fold development, and hence, the fault kinematic evolution in space and time. We postulate that the observed along-strike dip variations are related to lateral variation in fault displacement. Along-section variations of the progressive unconformity opening angles indicate greater fault slip in the upper Tortonian–Messinian time span; from the Messinian on, quantitative analysis of the unconformity indicate a constant or lower tectonic activity of the Crevillente Fault (Abanilla-Alicante sector); the minor abundance of striated pebbles in the Pliocene-Quaternary units could be interpreted as a decrease in the stress magnitude and consequently in the tectonic activity of the fault. At a regional scale, comparison of the growth successions cropping out in the northern and southern limits of the Bajo Segura Basin points to a southward migration of deformation in the basin. This means that the Bajo Segura Fault became active after the Crevillente Fault (Abanilla-Alicante sector), for which activity on the latter was probably decreasing according to our data. Consequently, we propose that the seismic hazard at the northern limit of the Bajo Segura Basin should be lower than at the southern limit.

Paleoenvironmental changes during the late Miocene (Messinian)–Pliocene transition (Bajo Segura Basin, southeastern Spain): sedimentological and ichnological evidence

A detailed sedimentological and paleontological analysis of the uppermost Miocene (Messinian)–Pliocene boundary at the northern border of the Bajo Segura Basin, southeastern Spain, was carried out in order to describe the evolution of the regional paleocoastline during the Pliocene reflooding of the Mediterranean immediately after the sea-level fall related to the Messinian Salinity Crisis. Multiple trace fossils typical of firm- and hardgrounds were recognized, allowing identification of Glossifungites (two different types), Entobia, and Gnathichnus ichnofacies. Trace-fossil analysis showed that lithology and media consistency exerted considerable control on the development of the different ichnocoenoses and that there was a clear decrease in hydrodynamic energy from a coastal to a shallow-water shelf environment related to progressive sea-level rise. Ichnological and sedimentological data provide evidence that the definitive flooding of the Mediterranean was rapid and synchronous throughout the northern margin of the Bajo Segura Basin. The following model for the Pliocene transgression in the study area is therefore proposed: (1) the marine ingression penetrated along the incised paleovalleys carved as a consequence of the fall in sea level, where the first two Pliocene systems were deposited (P0–P1); (2) during the maximum flooding surface of the transgression, the sea overflowed the margins of the paleovalleys and extended throughout the entire northern margin of the basin; and (3) the third Pliocene system was deposited, forming the lower part of a highstand systems tract (P2).

Quaternary ammonium-functionalized silica sorbents for the solid-phase extraction of aromatic amines under normal phase conditions

Quaternary ammonium-functionalized silica materials were synthesized and applied for solid-phase extraction (SPE) of aromatic amines, which are classified as priority pollutants by US Environmental Protection Agency. Hexamethylenetetramine used for silica surface modification for the first time was employed as SPE sorbent under normal phase conditions. Hexaminium-functionalized silica demonstrated excellent extraction efficiencies for o-toluidine, 4-ethylaniline and quinoline (recoveries 101–107%), while for N,N-dimethylaniline and N-isopropylaniline recoveries were from low to moderate (14–46%). In addition, the suitability of 1-alkyl-3-(propyl-3-sulfonate) imidazolium-functionalized silica as SPE sorbent was tested under normal phase conditions. The recoveries achieved for the five aromatic amines ranged from 89 to 99%. The stability of the sorbent was evaluated during and after 150 extractions. Coefficients of variation between 4.5 and 10.2% proved a high stability of the synthesized sorbent. Elution was carried out using acetonitrile in the case of hexaminium-functionalized silica and water for 1-alkyl-3-(propyl-3-sulfonate) imidazolium-functionalized silica sorbent. After the extraction the analytes were separated and detected by liquid chromatography ultraviolet detection (LC-UV). The retention mechanism of the materials was primarily based on polar hydrogen bonding and π–π interactions. Comparison made with activated silica proved the quaternary ammonium-functionalized materials to offer different selectivity and better extraction efficiencies for aromatic amines. Finally, 1-alkyl-3-(propyl-3-sulfonate) imidazolium-functionalized silica sorbent was successfully tested for the extraction of wastewater and soil samples.

Evolución tectónica del borde norte de la cuenca del Bajo Segura. Implicaciones en la evolución de la falla de Crevillente (sector Abanilla-Alicante)

En este estudio presentamos los resultados del análisis estructural del borde norte de la cuenca del Bajo Segura, en la cordillera Bética oriental. En este borde se desarrolla el sinclinal de Crevillente; se trata de un pliegue de propagación de falla con geometría de crecimiento y vergente al sur asociado a la falla de Crevillente (sector Abanilla-Alicante). El estudio cuantitativo de la discordancia progresiva asociada a dicho pliegue ha puesto de manifiesto que la actividad de esta falla se inició en el Tortoniense, aumentó durante el Messiniense y, a partir de ese momento se ha mantenido constante o ha disminuido durante el Plioceno y el Cuaternario. La escasez de depósitos cuaternarios deformados no implica que no exista actividad cuaternaria de la falla de Crevillente (sector Abanilla-Alicante), ya que la mayoría de los depósitos más recientes son discontinuos o se localizan al sur, alejados de la zona de máxima deformación. Por otro lado, el hecho de que la actividad de la falla del Bajo Segura, situada en el borde meridional de la cuenca, se iniciara durante el Plioceno, parece indicar una migración de la deformación hacia el sur.

Shear wave velocity estimation in the metropolitan area of Málaga (S Spain)

We carry out a seismic noise study based on array measurements at three sites in the Málaga basin, South Spain, for the further estimation of shear wave velocity profiles. For this purpose, we use both the H/V method and the f–k technique in order to characterize the different materials present in the zone, i.e., Quaternary sediments and Pliocene sedimentary rocks above the bedrock. The H/V analysis shows frequency peaks going from 1 Hz, in areas close to the border of the basin, to 0.3 Hz in places located toward the center of the formation. The f–k analysis allows obtaining the dispersion curves associated with each site and subsequently, estimating the Vs profiles by inversion of the respective group velocities. In this way, the basin basement can be characterized by S-wave velocities greater than 2000 m/s. Regarding the basin fill, it is divided into three layers defined by different wave velocity intervals. The shallowest one is featured by velocities ranging from 150 to 400 m/s and comprises the Quaternary sediments, while velocities going from 550–700 to1200–1600 m/s characterize the two underlying layers composed by Pliocene sediments. Finally, the information provided by the three Vs profiles is integrated in a 2D cross-section of the basin to have a spatial view of its sedimentary structure. The results obtained here, in addition to providing useful information about the infill of the basin near the metropolitan area of Málaga, will be very helpful for future seismic zonation studies in the region.

The Pliocene Mediterranean infilling of the Messinian Erosional Surface: New biostratigraphic data based on calcareous nannofossils (Bajo Segura Basin, SE Spain)

The Bajo Segura Basin (eastern Betic Cordillera) is a Mediterranean marginal basin where the Messinian Erosional Surface (MES), formed during the Messinian Salinity Crisis sea-level fall, is well developed. Overlying this major discontinuity the lower Pliocene transgressive sediments record the reflooding of the Mediterranean and the return to an open marine environment, the continental shelf being rebuilt after the Messinian erosion. The stratigraphic and biostratigraphic study of six sections allows two transgressive-regressive sequences filling the MES to be distinguished, correlated with the previously distinguished Mediterranean offshore seismic units. Ten calcareous nannofossil bioevents have been identified. The lower sequence can be dated according to nannofossil biozones NN12 to NN14 and the upper sequence by NN15 to NN16. The boundary between both lower Pliocene sedimentary sequences occur after the first common occurrence (FCO) of Discoaster asymmetricus found in the uppermost sediments of the lower sequence and before the first occurrence (FO) of Discoaster tamalis in the lowermost part of the upper sequence. Thus this sequence boundary can be estimated at between 4.1 and 4.0Ma ago.