The effect of carbon nanofillers on the performance of electromechanical polyaniline-based composite actuators

Different types of crystalline carbon nanomaterials were used to reinforce polyaniline for use in electromechanical bilayer bending actuators. The objective is to analyze how the different graphitic structures of the nanocarbons affect and improve the in situ polymerized polyaniline composites and their subsequent actuator behavior. The nanocarbons investigated were multiwalled carbon nanotubes, nitrogen-doped carbon nanotubes, helical-ribbon carbon nanofibers and graphene oxide, each one presenting different shape and structural characteristics. Films of nanocarbon-PAni composite were tested in a liquid electrolyte cell system. Experimental design was used to select the type of nanocarbon filler and composite loadings, and yielded a good balance of electromechanical properties. Raman spectroscopy suggests good interaction between PAni and the nanocarbon fillers. Electron microscopy showed that graphene oxide dispersed the best, followed by multiwall carbon nanotubes, while nitrogen-doped nanotube composites showed dispersion problems and thus poor performance. Multiwall carbon nanotube composite actuators showed the best performance based on the combination of bending angle, bending velocity and maximum working cycles, while graphene oxide attained similarly good performance due to its best dispersion. This parallel testing of a broad set of nanocarbon fillers on PAni-composite actuators is unprecedented to the best of our knowledge and shows that the type and properties of the carbon nanomaterial are critical to the performance of electromechanical devices with other conditions remaining equal.

Reproducibilidad de la batería EPESE de desempeño físico en atención primaria

Objetivo. Estimar la reproducibilidad de tres medidas objetivas de desempeño físico de personas mayores en atención primaria. Diseño. Estudio descriptivo y prospectivo con observación directa de la función física por parte de profesionales de la salud de acuerdo a un protocolo estandarizado. Emplazamiento. Tres centros de atención primaria de las provincias de Alicante y Valencia. Participantes. Muestra de 66 personas de 70 y más años, evaluadas en dos ocasiones por el mismo profesional al objeto de replicar idénticas condiciones del estudio, en un intervalo temporal de dos semanas (mediana de 14 días). Mediciones principales. Se evaluó el funcionamiento físico a través de tres pruebas objetivas de desempeño: el test de equilibrio, el de velocidad de la marcha, y la capacidad para levantarse y sentarse de una silla. Estas medidas provienen de los estudios E PESE (Established Populations for Epidemiologic Studies of the Elderly). Se ha calculado la fiabilidad test-retest mediante el coeficiente de correlación intraclase. Resultados. Los coeficientes de correlación intraclase (CCI) fueron de 0,55 para el test de equilibrio, de 0,69 para el test de levantarse de la silla, y de O, 79 para el de velocidad de la marcha. El valor para la puntuación total de la batería EPESE fue de 0,80. Conclusiones. La reproducibilidad de estas medidas de desempeño es tan aceptable como las aportadas por la bibliografía de referencia. Estas pruebas de desempeño permiten evaluar con rigor cambios importantes en funcionamiento y salud que se producen con el tiempo.

Performance Assessment of a Polymer Electrolyte Membrane Electrochemical Reactor under Alkaline Conditions – A Case Study with the Electrooxidation of Alcohols

A novel polymer electrolyte membrane electrochemical reactor (PEMER) configuration has been employed for the direct electrooxidation of propargyl alcohol (PGA), a model primary alcohol, towards its carboxylic acid derivatives in alkaline medium. The PEMER configuration comprised of an anode and cathode based on nanoparticulate Ni and Pt electrocatalysts, respectively, supported on carbonaceous substrates. The electrooxidation of PGA was performed in 1.0 M NaOH, where a cathode based on a gas diffusion electrode was manufactured for the reduction of oxygen in alkaline conditions. The performance of a novel alkaline anion-exchange membrane based on Chitosan (CS) and Poly(vinyl) alcohol (PVA) in a 50:50 composition ratio doped with a 5 wt.% of poly (4-vinylpyridine) organic ionomer cross-linked, methyl chloride quaternary salt resin (4VP) was assessed as solid polymer electrolyte. The influence of 4VP anionic ionomer loading of 7, 12 and 20 wt.% incorporated into the electrocatalytic layers was examined by SEM and cyclic voltammetry (CV) upon the optimisation of the electroactive area, the mechanical stability and cohesion of the catalytic ink onto the carbonaceous substrate for both electrodes. The performance of the 4VP/CS:PVA membrane was compared with the commercial alkaline anion-exchange membrane FAA −a membrane generally used in direct alcohol alkaline fuel cells- in terms of polarisation plots in alkaline conditions. Furthermore, preparative electrolyses of the electrooxidation of PGA was performed under alkaline conditions of 1 M NaOH at constant current density of 20 mA cm−2 using a PEMER configuration to provide proof of the principle of the feasibility of the electrooxidation of other alcohols in alkaline media. PGA conversion to Z isomers of 3-(2-propynoxy)-2-propenoic acid (Z-PPA) was circa 0.77, with average current efficiency of 0.32. Alkaline stability of the membranes within the PEMER configuration was finally evaluated after the electrooxidation of PGA.