Architecture of a multi-modal dialogue system oriented to multilingual question-answering

In this paper, a proposal of a multi-modal dialogue system oriented to multilingual question-answering is presented. This system includes the following ways of access: voice, text, avatar, gestures and signs language. The proposal is oriented to the question-answering task as a user interaction mechanism. The proposal here presented is in the first stages of its development phase and the architecture is presented for the first time on the base of the experiences in question-answering and dialogues previously developed. The main objective of this research work is the development of a solid platform that will permit the modular integration of the proposed architecture.

Dynamic investigation of an ancient masonry bell tower with operational modal analysis: a non-destructive experimental technique to obtain the dynamic characteristics of a structure

This paper shows the results of an experimental analysis on the bell tower of “Chiesa della Maddalena” (Mola di Bari, Italy), to better understand the structural behavior of slender masonry structures. The research aims to calibrate a numerical model by means of the Operational Modal Analysis (OMA) method. In this way realistic conclusions about the dynamic behavior of the structure are obtained. The choice of using an OMA derives from the necessity to know the modal parameters of a structure with a non-destructive testing, especially in case of cultural-historical value structures. Therefore by means of an easy and accurate process, it is possible to acquire in-situ environmental vibrations. The data collected are very important to estimate the mode shapes, the natural frequencies and the damping ratios of the structure. To analyze the data obtained from the monitoring, the Peak Picking method has been applied to the Fast Fourier Transforms (FFT) of the signals in order to identify the values of the effective natural frequencies and damping factors of the structure. The main frequencies and the damping ratios have been determined from measurements at some relevant locations. The responses have been then extrapolated and extended to the entire tower through a 3-D Finite Element Model. In this way, knowing the modes of vibration, it has been possible to understand the overall dynamic behavior of the structure.

Spectral BRDF-based determination of proper measurement geometries to characterize color shift of special effect coatings

A reduced set of measurement geometries allows the spectral reflectance of special effect coatings to be predicted for any other geometry. A physical model based on flake-related parameters has been used to determine nonredundant measurement geometries for the complete description of the spectral bidirectional reflectance distribution function (BRDF). The analysis of experimental spectral BRDF was carried out by means of principal component analysis. From this analysis, a set of nine measurement geometries was proposed to characterize special effect coatings. It was shown that, for two different special effect coatings, these geometries provide a good prediction of their complete color shift.

From problems to opportunities a shift needed for public health

Public health has in the past been a problem orientated discipline which has devoted its energies mainly to defining, prioritizing and trying to solve problems. This means paying attention to the short-term. If we examine the rises and falls of public health as a discipline with its successes and failures in gaining health, and if we compare public health with successful organisations, the need for changing the emphasis from problems to opportunities becomes apparent. In this endeavour for the future, strategic thinking and policy analysis seem appropriate new tools for public health professionals. The economic crisis and the weakness of the welfare state are presented as major opportunities for public health to achieve health gain in Europe.

Neutrosophic and Modal Components of Relations in Complex Systems

Semiotic components in the relations of complex systems depend on the Subject. There are two main semiotic components: Neutrosophic and Modal. Modal components are alethical and deontical. In this paper the authors applied the theory of Neutrosophy and Modal Logic to Deontical Impure Systems.

Spontaneous Abortions and Shift Work in a Cohort of Nurses in Norway

Background: An association between spontaneous abortions and shift work has been suggested, but present research results are conflicting. The aim of the study is to evaluate the relationship between spontaneous abortions among nurses, shift schedules, and nights worked. Methods: This is a longitudinal study where we identified 914 females from a cohort of nurses in Norway who had worked the same type of shift schedule 2008-2010; either permanent day shift, three-shift rotation or permanent night shift. Information on age, work and life-style factors, as well as spontaneous abortions during lifetime and the past three years (2008-2010) was obtained by annual questionnaires. Results: A higher prevalence of experienced spontaneous abortions before study start (2008) was found among nurses working permanent night shift compared to other nurses. In a linear regression analysis, a risk of 1.3 was found for experienced spontaneous abortions before study start among permanent night shift nurses, with day shift as reference, when adjusting for age, smoking, caffeine and job strain, but the finding was not statistical significant (95 per cent confidence interval 0.8-2.1). Permanent night shift workers had a risk of 1.5 experiencing spontaneous abortions in 2008-2010 compared to day shift nurses, although not statistical significant (95 per cent confidence interval 0.7-3.5). The number of night shifts the past three years was not associated with experiencing spontaneous abortions 2008-2010, but associated with a reduced risk of experiencing spontaneous abortions during lifetime. The results must be interpreted in the light of a possible selection bias; both selections into the occupation of nursing and into the different shift types of the more healthy persons may have occurred in this population. Conclusion: No significant increased risk of spontaneous abortion among permanent night shift nurses compared to day-time nurses was found in this study, and no association was found between spontaneous abortions and the number of worked night shifts.

An approach to the application of shift-and-add algorithms on engineering and industrial processes

Different kinds of algorithms can be chosen so as to compute elementary functions. Among all of them, it is worthwhile mentioning the shift-and-add algorithms due to the fact that they have been specifically designed to be very simple and to save computer resources. In fact, almost the only operations usually involved with these methods are additions and shifts, which can be easily and efficiently performed by a digital processor. Shift-and-add algorithms allow fairly good precision with low cost iterations. The most famous algorithm belonging to this type is CORDIC. CORDIC has the capability of approximating a wide variety of functions with only the help of a slight change in their iterations. In this paper, we will analyze the requirements of some engineering and industrial problems in terms of type of operands and functions to approximate. Then, we will propose the application of shift-and-add algorithms based on CORDIC to these problems. We will make a comparison between the different methods applied in terms of the precision of the results and the number of iterations required.

CeO2-promoted Ni/activated carbon catalysts for the water–gas shift (WGS) reaction

The low temperature water–gas shift (WGS) reaction has been studied over carbon-supported nickel catalysts promoted by ceria. To this end, cerium oxide has been dispersed (at different loadings: 10, 20, 30 and 40 wt.%) on the activated carbon surface with the aim of obtaining small ceria particles and a highly available surface area. Furthermore, carbon- and ceria-supported nickel catalysts have also been studied as references. A combination of N2 adsorption analysis, powder X-ray diffraction, temperature-programmed reduction with H2, X-ray photoelectron spectroscopy and TEM analysis were used to characterize the Ni–CeO2 interactions and the CeO2 dispersion over the activated carbon support. Catalysts were tested in the low temperature WGS reaction with two different feed gas mixtures: the idealized one (with only CO and H2O) and a slightly harder one (with CO, CO2, H2, and H2O). The obtained results show that there is a clear effect of the ceria loading on the catalytic activity. In both cases, catalysts with 20 and 10 wt.% CeO2 were the most active materials at low temperature. On the other hand, Ni/C shows a lower activity, this assessing the determinant role of ceria in this reaction. Methane, a product of side reactions, was observed in very low amounts, when CO2 and H2 were included in the WGS feed. Nevertheless, our data indicate that the methanation process is mainly due to CO2, and no CO consumption via methanation takes place at the relevant WGS temperatures. Finally, a stability test was carried out, obtaining CO conversions greater than 40% after 150 h of reaction.

Switchable surfactant-assisted carbon nanotube coatings: innovation through pH shift

The inner surface of fused-silica capillaries has been coated with a dense/homogeneous coating of commercial multi-wall carbon nanotubes (MWCNTs) using a stable ink as deposit precursor. Solubilization of the MWCNTs was achieved in water/ethanol/dimethylformamide by the action of a surfactant, which can switch between a neutral or an ionic form depending on the pH of the medium, which thus becomes the driving force for the entire deposition process. Careful control of the experimental conditions has allowed us to selectively deposit CNTs on the inner surface of insulating silica capillaries by a simple, reproducible, and easily adaptable method.