Experiences on using Arduino for laboratory experiments of Automatic Control and Robotics

The free hardware platforms have become very important in engineering education in recent years. Among these platforms, Arduino highlights, characterized by its versatility, popularity and low price. This paper describes the implementation of four laboratory experiments for Automatic Control and Robotics courses at the University of Alicante, which have been developed based on Arduino and other existing equipment. Results were evaluated taking into account the views of students, concluding that the proposed experiments have been attractive to them, and they have acquired the knowledge about hardware configuration and programming that was intended.

Optimisation of analytical methods for the characterisation of oranges, clementines and citrus hybrids cultivated in Spain on the basis of their composition in ascorbic acid, citric acid and major sugars

Three HPLC methods were optimised for the determination of citric acid, succinic acid and ascorbic acid using a photodiode array detector and fructose, glucose and sucrose using a refractive index in twenty eight citrus juices. The analysis was completed in <16 min. Two different harvests were taken into account for this study. For the season 2011, ascorbic acid content was comprised between 19.4 and 59 mg vitamin C/100 mL; meanwhile for the season 2012, the content was slightly higher for most of the samples ranging from 33.5 to 85.3 mg vitamin C/100 mL. Moreover, the citric acid content in orange juices ranged between 9.7 and 15.1 g L−1, while for clementines the content was clearly lower (i.e. from 3.5 to 8.4 g L−1). However, clementines showed the highest sucrose content with values near to 6 g/100 mL. Finally, a cluster analysis was applied to establish a classification of the citrus species.

Changes in Access to Health Services of the Immigrant and Native-Born Population in Spain in the Context of Economic Crisis

Aim: To analyze changes in access to health care and its determinants in the immigrant and native-born populations in Spain, before and during the economic crisis. Methods: Comparative analysis of two iterations of the Spanish National Health Survey (2006 and 2012). Outcome variables were: unmet need and use of different healthcare levels; explanatory variables: need, predisposing and enabling factors. Multivariate models were performed (1) to compare outcome variables in each group between years, (2) to compare outcome variables between both groups within each year, and (3) to determine the factors associated with health service use for each group and year. Results: unmet healthcare needs decreased in 2012 compared to 2006; the use of health services remained constant, with some changes worth highlighting, such as the decline in general practitioner visits among autochthons and a narrowed gap in specialist visits between the two populations. The factors associated with health service use in 2006 remained constant in 2012. Conclusion: Access to healthcare did not worsen, possibly due to the fact that, until 2012, the national health system may have cushioned the deterioration of social determinants as a consequence of the financial crisis. Further studies are necessary to evaluate the effects of health policy responses to the crisis after 2012.

Teaching-learning process of historical heritage: a Journey as a beginning, path and end

The implantation of new university degrees within the European Higher Education Area implies the need of innovative methodologies in teaching and learning to improve the skills and competencies of students and to answer the growing needs that society continuously demands to heritage management experts. The present work shows an application of the teaching methodology proposed during the international workshop entitled “I International Planning Preservation Workshop. Learning from Al Andalus”, which included the participation of the University of Alicante and Granada, Università Politecnico di Milano and Hunter College City University of New York; where we tried to dissolve traditional boundaries derived of interuniversity cooperation programs. The main objective of the workshop was to discuss and debate the role of urban Historical Centers within the Global Heritage by the integrated work through multidisciplinary teams and the creation of a permanent international working group between these universities to both teach and research. The methodology of this workshop was very participatory and considered the idea of a new learning process generated by "a journey experience." A trip from global to local (from the big city to the small village) but also a trip from the local (historical) part of a big city to the global dimension of contemporary historical villages identified by the students through a system of exhibition panels in affinity groups, specific projects proposed by lecturers and teachers or the generation of publications in various areas (texts, photographs, videos, etc.). So, the participation of the students in this multidisciplinary meeting has enhanced their capacity for self-criticism in several disciplines and has promoted their ability to perform learning and research strategies in an autonomous way. As a result, it has been established a permanent international work structure for the development of projects of the Historical City. This relationship has generated the publication of several books whose contents have reflected the conclusions developed in the workshop and several teaching proposals shared between those institutions. All these aspects have generated a new way of understanding the teaching process through a journey, in order to study the representative role of university in the historical heritage and to make students (from planning, heritage management, architecture, geography, sociology, history or engineering areas) be compromised on searching strategies for sustainable development in the Contemporary City.

The International Competitiveness of the Biscayan Iron and Steel Industry (1880-1913)

This study has a double objective: to provide foreign colleagues with an insight into the controversy surrounding the international competitiveness of pig iron produced in Bilbao and also to present previously unpublished documentation regarding the European iron industry, which I have retrieved from the historical archive of Credit Lyonnais of Paris. This information includes the costs of Biscayan, French, British, German and Belgium pig iron broken down into five components (iron ore, coke, flux, labour and other costs), which is useful in determining the reasons why the pig iron from Bilbao became less competitive. The article is made up of three parts. Firstly, I will synthesise the controversy surrounding the competitiveness of the Basque iron and steel industry. Then I will present the itemised costs which provide information to illustrate how Biscayan pig iron was not competitive because it was produced with English coal which was more expensive than that consumed by the European factories located "on top of" or near coal seams. The article will finish with a section that, by way of conclusion, explains the comparative advantage and disadvantage of Bilbao, applying the first model of Alfred Weber's Theory of Industrial Location to three technological advances, occurring between the 1860s and 1913 (malleable iron, Bessemer steel and Thomas steel).

Controversy between curriculum design and curriculum development of online "highly specialized" education in the field of construction

Nowadays, on a global level, the Higher Education System has a complex and broad horizon of curricular tools to use in the teaching and learning process. In addition to these new educational instruments, full of possibilities, we face specific socio-economic conditions that affect in a significantly way the Curriculum Development in certain knowledge areas (areas traditionally built on a methodology based on a physical presence of students in the classroom). Some areas such as Restoration, Rehabilitation or Construction Pathologies, and the construction sector in general, require very defined and particular knowledge that only a small number of experts claim as specialized training. All these aspects condition the teaching methodology performed in a physical classroom at a university campus (the only option used until recent years) and made us consider the integration of online teaching in these areas too. The present work shows the teaching methodology used for the development of two online courses, where we offer distance learning for "highly specialized" formation in the Edification area (an area where traditionally there was only classroom training). At the beginning, both courses were designed by classroom training, but got a really small number of applications due to the specialized topic proposed. Later, we proposed a "Curriculum Redesign" of the contents, offering an online modality, which implied a significant demand both within and outside the university area. A notable feature of this educational experience is the great spectrum opened for attendees of both courses in the online version. This situation improved significantly the "Curriculum Development" for the student and implied an interesting new proposal on the offered contents and materials (what would have been really difficult to get in a face to face classroom). In conclusion, the absence of certain types of specialized contents in the academic university curricula makes essential to raise new methodologies to save the gap in this area through additional training courses as those analyzed in this paper. Thus, our experience opens a debate on the appropriateness of implementing online training in relation to the face to face training in constructive content subjects and, especially, presents a new scheme, not without controversy, for the curriculum design.