Forensic analysis of buildings affected by mining subsidence based on Differential Interferometry (Part III)

This work presents a forensic analysis of buildings affected by mining subsidence, which is based on deformation data obtained by Differential Interferometry (DInSAR). The proposed test site is La Union village (Murcia, SE Spain) where subsidence was triggered in an industrial area due to the collapse of abandoned underground mining labours occurred in 1998. In the first part of this work the study area was introduced, describing the spatial and temporal evolution of ground subsidence, through the elaboration of a cracks map on the buildings located within the affected area. In the second part, the evolution of the most significant cracks found in the most damaged buildings was monitored using biaxial extensometric units and inclinometers. This article describes the work performed in the third part, where DInSAR processing of satellite radar data, available between 1998 and 2008, has permitted to determine the spatial and temporal evolution of the deformation of all the buildings of the study area in a period when no continuous in situ instrumental data is available. Additionally, the comparison of these results with the forensic data gathered in the 2005–2008 period, reveal that there is a coincidence between damaged buildings, buildings where extensometers register significant movements of cracks, and buildings deformation estimated from radar data. As a result, it has been demonstrated that the integration of DInSAR data into forensic analysis methodologies contributes to improve significantly the assessment of the damages of buildings affected by mining subsidence.

The episcopal complex of Eio-El Tolmo de Minateda (Hellín, Albacete, Spain). Architecture and spatial organization. 7th to 8th centuries AD

The episcopal complex of Eio, located in El Tolmo de Minateda, was built between the end of the 6th century and the beginning of the 7th century, possibly as a political decision taken by the ecclesiastical authority in the capital of the Visigothic kingdom (Toletum). With the comprehensive study of the whole complex presented below (construction cycles, furniture, decoration and location of spaces), we can interpret the function of each space in the basilica and the domus episcopi, the liturgical and general movement routes, the existence of some hierarchical environments, and specify the chronological development of the buildings. After the Arab-Berber conquest of Hispania in the early 8th century, the whole complex will experience a series of transformations that will convert the religious and monumental public area into a private, residential and industrial Islamic quarter.

Invisible work, unseen hazards: the health of women immigrant household service workers in Spain

BACKGROUND: Household service work has been largely absent from occupational health studies. We examine the occupational hazards and health effects identified by immigrant women household service workers. METHODS: Exploratory, descriptive study of 46 documented and undocumented immigrant women in household services in Spain, using a phenomenological approach. Data were collected between September 2006 and May 2007 through focus groups and semi-structured individual interviews. Data were separated for analysis by documentation status and sorted using a mixed-generation process. In a second phase of analysis, data on psychosocial hazards were organized using the Copenhagen Psychosocial Questionnaire as a guide. RESULTS: Informants reported a number of environmental, ergonomic and psychosocial hazards and corresponding health effects. Psychosocial hazards were especially strongly present in data. Data on reported hazards were similar by documentation status and varied by several emerging categories: whether participants were primarily cleaners or carers and whether they lived in or outside of the homes of their employers. Documentation status was relevant in terms of empowerment and bargaining, but did not appear to influence work tasks or exposure to hazards directly. CONCLUSIONS: Female immigrant household service workers are exposed to a variety of health hazards that could be acted upon by improved legislation, enforcement, and preventive workplace measures, which are discussed.

Relationship between piezometric level and ground deformations measured by means of DInSAR in the Vega Media of the Segura River (Spain)

Differential SAR Interferometry (DInSAR) is a remote sensing method with the well demonstrated ability to monitor geological hazards like earthquakes, landslides and subsidence. Among all these hazards, subsidence involves the settlement of the ground surface affecting wide areas. Frequently, subsidence is induced by overexploitation of aquifers and constitutes a common problem that affects developed societies. The excessive pumping of underground water decreases the piezometric level in the subsoil and, as a consequence, increases the effective stresses with depth causing a consolidation of the soil column. This consolidation originates a settlement of ground surface that must be withstood by civil structures built on these areas. In this paper we make use of an advanced DInSAR approach - the Coherent Pixels Technique (CPT) [1] - to monitor subsidence induced by aquifer overexploitation in the Vega Media of the Segura River (SE Spain) from 1993 to the present. 28 ERS-1/2 scenes covering a time interval of about 10 years were used to study this phenomenon. The deformation map retrieved with CPT technique shows settlements of up to 80 mm at some points of the studied zone. These values agree with data obtained by means of borehole extensometers, but not with the distribution of damaged buildings, well points and basements, because the occurrence of damages also depends on the structural quality of the buildings and their foundations. The most interesting relationship observed is the one existing between piezometric changes, settlement evolution and local geology. Three main patterns of ground surface and piezometric level behaviour have been distinguished for the study zone during this period: 1) areas where deformation occurs while ground conditions remain altered (recent deformable sediments), 2) areas with no deformation (old and non-deformable materials), and 3) areas where ground deformation mimics piezometric level changes (expansive soils). The temporal relationship between deformation patterns and soil characteristics has been analysed in this work, showing a delay between them. Moreover, this technique has allowed the measurement of ground subsidence for a period (1993-1995) where no instrument information was available.

Identification of the local productive systems in Spain: a new approach

Paper submitted to the 44th European Congress of the European Regional Science Association, Porto, 25-29 August 2004.

The new economy in Spain: a regional analysis

Paper submitted to the 44th European Congress of the European Regional Science Association, Porto, 25-29 August 2004.

Identification of technological districts: the case of Spain

Paper submitted to the 51st European Congress of the Regional Science Association International, 37th Spanish Regional Science Association Conference, Barcelona, August 30-September 3, 2011.

Prevalence of exposure to occupational risks during preganancy in Spain

Objectives. We describe reported exposures to main categories of occupational agents and conditions in Spanish pregnant workers. Methods. Women were recruited at 12th week of pregnancy from main public gynaecological consults to be included in the INMA Spanish cohorts study (n = 2,058). Through personal interviews with structured questionnaires, information on working situation and working conditions during pregnancy was obtained. Results. Fifty percent of the women reported frequent exposure to physical load (standing, heavy lifting) and 45 % reported exposure to three or more indicators of job strain. Exposure to at least one physical agent (noise, vibrations, etc.) affected 25 % of the women. Exposure to chemicals was reported by 20 % of the women, mostly including solvents and cleaning products. Eight percent of the women worked at night shifts. Job strain was more prevalent in office workers and industrial operators. Industrial workers showed the highest prevalence of exposure to chemical and physical pollutants. Conclusions. Our data suggest that working conditions of pregnant women may need increased control in Spain.

Breaking the silence ceiling: how gender violence became into a social problem in Spain through media and politics

This research presents the explanatory model of the process of reconstruction of the ʺsocial problemʺ of Intimate Partner Violence (I.P.V) in Spain during last five years, with special attention to the role of media in this process. Using a content analysis of the three more diffused general newspapers, a content analysis of the minutes of the Parliament, and the statistics of the police reports and murders, from January of 1997 to December of 2001, it observes the relationship between the evolution of the incidence of Intimate Partner Violence (I.P.V) (measured by the number of deaths and the number of police reports) and the evolution of stories about this topic in press. It also studies the interconnection of the two previous variables with the political answer to the problem (measured by the interventions on the I.P.V. in the Senate and in the Congress). Data shows that, even though police reports have increased due to the contribution of politics and media, I.P.V murders keep on growing up.

Construcción, reconstrucción y consolidación del desaparecido Grupo Escolar “Francisco Giner de los Ríos” de Alicante (España)

La demolición del Grupo Escolar “Francisco Giner de los Ríos” supuso una pérdida incuestionable para la ciudad de Alicante (España), desapareciendo uno de los más relevantes ejemplos racionalistas, símbolo de modernidad y del desarrollo que en materia de enseñanza significó en la ciudad el “Plan de Construcción de Escuelas y Ordenación Escolar” de 1931. Con el fin de contribuir a subsanar el vacío documental que antecedió su demolición, el presente artículo muestra los resultados del estudio de las fases determinantes de la historia del edificio: proyecto (1933), construcción (1934-1935), reconstrucción y consolidación (1943-1944). Se concluyen las causas que originaron la ruina del inmueble, el alcance y magnitud de los daños y las avanzadas técnicas empleadas en su recuperación, prestando especial interés a las intervenciones de cimentación y consolidación del terreno, pilotajes e inyecciones de cemento, prácticas de relevancia internacional en el periodo de posguerra en España y Segunda Guerra Mundial.

A study of a soft computing based method for 3D scenario reconstruction

Several recent works deal with 3D data in mobile robotic problems, e.g., mapping. Data comes from any kind of sensor (time of flight, Kinect or 3D lasers) that provide a huge amount of unorganized 3D data. In this paper we detail an efficient approach to build complete 3D models using a soft computing method, the Growing Neural Gas (GNG). As neural models deal easily with noise, imprecision, uncertainty or partial data, GNG provides better results than other approaches. The GNG obtained is then applied to a sequence. We present a comprehensive study on GNG parameters to ensure the best result at the lowest time cost. From this GNG structure, we propose to calculate planar patches and thus obtaining a fast method to compute the movement performed by a mobile robot by means of a 3D models registration algorithm. Final results of 3D mapping are also shown.

GPGPU implementation of growing neural gas: application to 3D scene reconstruction

Self-organising neural models have the ability to provide a good representation of the input space. In particular the Growing Neural Gas (GNG) is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation. However, this type of learning is time-consuming, especially for high-dimensional input data. Since real applications often work under time constraints, it is necessary to adapt the learning process in order to complete it in a predefined time. This paper proposes a Graphics Processing Unit (GPU) parallel implementation of the GNG with Compute Unified Device Architecture (CUDA). In contrast to existing algorithms, the proposed GPU implementation allows the acceleration of the learning process keeping a good quality of representation. Comparative experiments using iterative, parallel and hybrid implementations are carried out to demonstrate the effectiveness of CUDA implementation. The results show that GNG learning with the proposed implementation achieves a speed-up of 6× compared with the single-threaded CPU implementation. GPU implementation has also been applied to a real application with time constraints: acceleration of 3D scene reconstruction for egomotion, in order to validate the proposal.

Adiestrando a la juventud obrera: la política de formación técnica-industrial de la dictadura primorriverista

El objetivo de este trabajo es analizar cómo la dictadura de Primo de Rivera llevó a cabo la reforma de la enseñanza industrial del joven obrero a través del Estatuto de Enseñanza Industrial de 1924 y del Estatuto de Formación Profesional de 1928, dentro de la órbita ideológica del “modernismo reaccionario”. La dictadura primorriverista se encontraba en una época influida por las consecuencias de la Gran Guerra y empezaba a percibir la formación profesional técnica-industrial como un mecanismo de adoctrinamiento de la juventud obrera, a partir del cual se podía construir una identidad nacional y profesional, a la vez que modernizar la industria nacional. Por ello, la dictadura de Primo de Rivera decidió centralizar todos los canales de formación industrial del joven obrero a través de un nuevo plan de estudios técnico e industrial dentro de las escuelas industriales y de trabajo. Así intentaba controlar al movimiento obrero, formar una clase media de técnicos industriales, satisfacer las necesidades económicas del país, al mismo tiempo que mantener la jerarquización socio-política tradicional. Pero la aplicación de este proyecto educativo durante la Segunda República no cumplió con las expectativas ideológicas y políticas de la dictadura de Primo de Rivera.

Muro Mediterráneo versus movimiento moderno

Una década antes de que fuera construido el Muro Atlántico fue ejecutado un sistema de defensas a lo largo de la costa del Mediterráneo español (1936-39). La recuperación de estas construcciones (de sus documentos gráficos) y su puesta en valor pueden ayudar a consolidar una memoria propia del siglo XX. Este trabajo consiste en inventariar, medir y dibujar los planos de estas arquitecturas a fin de fijar la memoria que se diluye por la erosión del tiempo. Estas defensas militares se sitúan en muchas fronteras: ¿son propiamente arquitectura o piezas industriales? ¿Son arquitectura moderna? Estas transitan entre dos mundos: uno que proyecta arquitecturas ligeras, flexibles y con caducidad frente a otro que construye obras compactas, rígidas y eternas. También se mueven por dos épocas: una que perpetúa las hazañas épicas frente a otras que muestra los desastres. Espacio, tiempo y materia. Son las ruinas de hormigón más modernas de nuestra historia que se encuentran camufladas en la topografía: templos y tumbas a la vez. En esta reconstrucción de la memoria, resulta crucial la restitución gráfica que es donde comienza el conocimiento.

3D-based reconstruction using growing neural gas landmark: application to rapid prototyping in shoe last manufacturing

Customizing shoe manufacturing is one of the great challenges in the footwear industry. It is a production model change where design adopts not only the main role, but also the main bottleneck. It is therefore necessary to accelerate this process by improving the accuracy of current methods. Rapid prototyping techniques are based on the reuse of manufactured footwear lasts so that they can be modified with CAD systems leading rapidly to new shoe models. In this work, we present a shoe last fast reconstruction method that fits current design and manufacturing processes. The method is based on the scanning of shoe last obtaining sections and establishing a fixed number of landmarks onto those sections to reconstruct the shoe last 3D surface. Automated landmark extraction is accomplished through the use of the self-organizing network, the growing neural gas (GNG), which is able to topographically map the low dimensionality of the network to the high dimensionality of the contour manifold without requiring a priori knowledge of the input space structure. Moreover, our GNG landmark method is tolerant to noise and eliminates outliers. Our method accelerates up to 12 times the surface reconstruction and filtering processes used by the current shoe last design software. The proposed method offers higher accuracy compared with methods with similar efficiency as voxel grid.