La cobertura periodística de la obesidad en la prensa española (2000-2005)

Antecedentes: la obesidad es un problema de salud pública en España. Los medios de comunicación son una herramienta útil para la salud pública. Objetivo: explorar el tratamiento periodístico de la obesidad en la prensa escrita española durante 2000-2005, frecuencia de aparición, fuentes de información y enfoques, en relación con el contexto social. Materiales y métodos: análisis de contenido cuantitativo de 690 noticias publicadas en El País, El Mundo y ABC. Cálculo de frecuencias y odds ratio (OR) con intervalos de confianza (IC) del 95% y significación estadística. Resultados: incrementaron las noticias de 2000 (n=25) a 2005 (n=185). Se centraron en denuncias (36,4%) y magnitud del problema (15,7%), en detrimento de aquellas sobre iniciativas-estrategias políticas (3,8%). Destacan los hombres como fuentes informativas principales (75,5%) y las mujeres como primeras firmantes de las noticias (56,1%). Los hombres del ámbito médico-sanitario (OR=1,98;IC95%,1,11-3,57) y las mujeres del ámbito político (OR=2,54;IC95%1,46-4,42) tienen mayor probabilidad de ser la fuente informativa principal. Conclusiones: la cobertura periodística de la obesidad durante 2000-2005 aumentó, coincidiendo con el desarrollo de respuestas políticas en torno al tema. Principalmente, se denuncia el problema. Destaca la escasa cobertura periodística de iniciativas-estrategias políticas, sugiriendo incipiente interacción entre la agenda política y mediática.

Preparation, characterisation and testing of CuO/Ce0.8Zr0.2O2 catalysts for NO oxidation to NO2 and mild temperature diesel soot combustion

CuO/ceria-zirconia catalysts have been prepared, deeply characterised (N2 adsorption–desorption isotherms at −196 °C, XRD, Raman spectroscopy, XPS, TEM and H2-TPR) and tested for NO oxidation to NO2 in TPR conditions, and for soot combustion at mild temperature (400 °C) in a NOx/O2 stream. The behaviour has been compared to that of a reference Pt/alumina commercial catalyst. The ceria-zirconia support was prepared by the co-precipitation method, and different amounts of copper (0.5, 1, 2, 4 and 6 wt%) were loaded by incipient wetness impregnation. The results revealed that copper is well-dispersed onto the ceria-zirconia support for the catalysts with low copper loading and CuO particles were only identified by XRD in samples with 4 and 6% of copper. A very low loading of copper increases significantly the activity for the NO oxidation to NO2 with regard to the ceria-zirconia support and an optimum was found for a 4% CuO/ceria-zirconia composition, showing a very high activity (54% at 348 °C). The soot combustion rate at 400 °C obtained with the 2% CuO/ceria-zirconia catalyst is slightly lower to that of 1% Pt/alumina in terms of mass of catalyst but higher in terms of price of catalyst.

The role of microorganisms in the formation of calcitic moonmilk deposits and speleothems in Altamira Cave

Bacteria are able to induce carbonate precipitation although the participation of microbial or chemical processes in speleothem formation remains a matter of debate. In this study, the origin of carbonate depositions such as moonmilk, an unconsolidated microcrystalline formation with high water content, and the consolidation of carbonate precipitates into hard speleothems were analyzed. The utilized methods included measurements of the composition of stable isotopes in these precipitates, fluorimetric determinations of RNA/DNA ratios and respirometric estimations in Altamira Cave. Results from isotope composition showed increases of the δ18O and δ13C ratios from moonmilk in the very first stages of formation toward large speleothems. Estimates of RNA/DNA ratios suggested an inactivation of microorganisms from incipient moonmilk toward consolidated deposits of calcium carbonate. Respiratory activity of microorganisms also showed a significant decrease in samples with accumulated calcite. These results suggest that bacterial activity induces the conditions required for calcium carbonate precipitation, initiating the first stages of deposition. Progressive accumulation of carbonate leads towards a less favorable environment for the development of bacteria. On consolidated speleothems, the importance of bacteria in carbonate deposition decreases and chemical processes gain importance in the deposition of carbonates.

Transmedialidad: series de ficción y redes sociales. El caso de Pulseras Rojas en el grupo oficial de Facebook (Antena 3. España)

Analizamos el Facebook de la teleserie Pulseras Rojas emitida en España por Antena 3, en tanto recurso transmedia y fuente de oportunidades para estimular el engagement del espectador. Estudiamos el tráfico generado durante la emisión de la segunda temporada, entre julio y agosto de 2013. Siguiendo la propuesta de Askwith (2007), se pueden identificar siete modalidades de touchpoints, es decir, puntos de contacto con la narración, adicionales a la propia emisión televisiva: acceso expandido, contenido adaptado, contenido expandido, productos de marca, actividades relacionadas, interacción social e interactividad. El estudio exploratorio se basa en el análisis del contenido del grupo de la serie en Facebook e identifica las modalidades de touchpoints y sus resultados. Facebook se revela como un potente instrumento para involucrar al espectador, aunque la estrategia comunicativa de la cadena de televisión presenta una gestión incipiente, poco evolucionada, que desaprovecha el carácter interactivo y bidireccional de la red social.

Catalytic performance of CuO/Ce0.8Zr0.2O2 loaded onto SiC-DPF in NOx-assisted combustion of diesel soot

This work presents a comparative study between the catalytic performance of the 2% CuO/ceria-zirconia powder catalyst and the same catalyst supported on silicon carbide DPF (Diesel Particulate Filter) towards NO oxidation reaction and soot combustion reaction. The ceria-zirconia catalyst was prepared by the co-precipitation method and 2 wt% copper was incorporated by the incipient wetness impregnation method. The catalyst was incorporated onto the ceramic support using a simple and organic solvent-free procedure by a simply dipping the DPF into an aqueous solution of the catalyst. The powder catalyst has been characterized using N2 adsorption at −196 °C, XRD and Raman Spectroscopy; whereas the catalytic coating morphology has been evaluated by SEM and the mechanical stability by an adherence test. Both catalyst configurations were tested for NO oxidation to NO2 and for soot combustion under NOx/O2. The results revealed that incorporation of the very active copper/ceria-zirconia catalyst onto SiC-DPF has been successfully achieved by a simple coating procedure. Furthermore, the catalytic coating has shown suitable mechanical, chemical and thermal stability. A satisfactory catalytic performance of the catalytic-coated filter was reached towards the NO oxidation reaction. Moreover, it was proved that the catalytic coating is stable and the corresponding coated DPF can be reused for several cycles of NO oxidation without a significant decrease in its activity. Finally, it was verified that the loose-contact mode is a good choice to simulate the catalytic performance of this active phase in a real diesel particulate filter.

Tiburzio Spannocchi’s project for the fortifications of Fuenterrabía in 1580

Fuenterrabía (Hondarribia) is a town located on the Franco-Spanish border. Between the 16th and 19th centuries it was considered to be one of the most outstanding strongholds in the Basque Country due to its strategic position. The bastion system of fortification was extremely prevalent in this stronghold. It was one of the first Spanish towns to adopt the incipient Renaissance designs of the bastion. The military engineers subsequently carried out continuous fortification projects that enabled the structure to withstand the advances being made in artillery and siege tactics. After the construction of the citadel of Pamplona had begun in 1571, following the design of the prestigious military engineer, Jacobo Palear Fratín and being revised by Viceroy Vespasiano Gonzaga, the aforementioned engineer undertook an ambitious project commissioned by Felipe II to modernise the fortifications of Fuenterrabía. Neither the plans nor the report of this project have been conserved, but in the year 2000, César Fernández Antuña published the report written by Spannocchi on the state of the fortifications of Fuenterrabía when he arrived to the Spanish peninsula, discovered in the Archivo Histórico Provincial de Zaragoza. This document conducts an in-depth analysis of Spannocchi’s project and how it was related to Fratín’s previous project. It concludes that this project encountered problems in updating the new bastions at the end of the 16th century, and identifies the factors which prevented the stronghold from being extended as was the case in Pamplona after Fratín’s project.