Vertical crustal motion along the Mediterranean and Black Sea coast derived from ocean altimetry and tide gauge data

Tide gauge (TG) data along the northern Mediterranean and Black Sea coasts are compared to the sea-surface height (SSH) anomaly obtained from ocean altimetry (TOPEX/Poseidon and ERS-1/2) for a period of nine years (1993–2001). The TG measures the SSH relative to the ground whereas the altimetry does so with respect to the geocentric reference frame; therefore their difference would be in principle a vertical ground motion of the TG sites, though there are different error sources for this estimate as is discussed in the paper. In this study we estimate such vertical ground motion, for each TG site, from the slope of the SSH time series of the (non-seasonal) difference between the TG record and the altimetry measurement at a point closest to the TG. Where possible, these estimates are further compared with those derived from nearby continuous Global Positioning System (GPS) data series. These results on vertical ground motion along the Mediterranean and Black Sea coasts provide useful source data for studying, contrasting, and constraining tectonic models of the region. For example, in the eastern coast of the Adriatic Sea and in the western coast of Greece, a general subsidence is observed which may be related to the Adriatic lithosphere subducting beneath the Eurasian plate along the Dinarides fault.

Geodynamic implications derived from Numidian-like distal turbidites deposited along the Internal–External Domain Boundary of the Betic Cordillera (S Spain)

New data reveal Early Burdigalian ‘Numidian-like lithofacies’ in successions of the internal (southernmost) part of the South Iberian Margin (SIM) and the south-western margin of the Mesomediterranean Microplate (MM). The well-known Numidian Formation was deposited in the external (Massylian) sub-domain of the Maghrebian Flysch Basin (a south-western branch of the Tethys Ocean). The anomalous occurrence of ‘Numidian-like lithofacies’ is induced by the particular Early Miocene palaeogeographical and geodynamic complexity of the sector. This consisted of a ‘triple point’ with a dextral transform fault between the SIM and the MM-Maghrebian Flysch Basin system. In this framework, the ageing of Iberian reliefs and the MM collapse, coupled with an African Margin upbulging, and a shortening of the Maghrebian Flysch Basin (both related to the subduction), could have resulted in the arrival of the Numidian depositional system from so far away.

A model for acoustic absorbent materials derived from coconut fiber

In the present paper, a methodology is proposed for obtaining empirical equations describing the sound absorption characteristics of an absorbing material obtained from natural fibers, specifically from coconut. The method, which was previously applied to other materials, requires performing measurements of air-flow resistivity and of acoustic impedance for samples of the material under study. The equations that govern the acoustic behavior of the material are then derived by means of a least-squares fit of the acoustic impedance and of the propagation constant. These results can be useful since they allow the empirically obtained analytical equations to be easily incorporated in prediction and simulation models of acoustic systems for noise control that incorporate the studied materials.

An improvement of a SLAM RGB-D method with movement prediction derived from a study of visual features

This paper presents a method for the fast calculation of a robot’s egomotion using visual features. The method is part of a complete system for automatic map building and Simultaneous Location and Mapping (SLAM). The method uses optical flow to determine whether the robot has undergone a movement. If so, some visual features that do not satisfy several criteria are deleted, and then egomotion is calculated. Thus, the proposed method improves the efficiency of the whole process because not all the data is processed. We use a state-of-the-art algorithm (TORO) to rectify the map and solve the SLAM problem. Additionally, a study of different visual detectors and descriptors has been conducted to identify which of them are more suitable for the SLAM problem. Finally, a navigation method is described using the map obtained from the SLAM solution.

Micro/Mesoporous Activated Carbons Derived from Polyaniline: Promising Candidates for CO2 Adsorption

A series of activated carbons were prepared by carbonization of polyaniline at different temperatures, using KOH or K2CO3 as activating agent. Pure microporous or micro/mesoporous activated carbons were obtained depending on the preparation conditions. Carbonization temperature has been proven to be a key parameter to define the textural properties of the carbon when using KOH. Low carbonization temperatures (400–650 °C) yield materials with a highly developed micro- and mesoporous structure, whereas high temperatures (800 °C) yield microporous carbons. Some of the materials prepared using KOH exhibit a BET surface area superior to 4000 m2/g, with total pore volume exceeding 2.5 cm3/g, which are among the largest found for activated carbons. On the other hand, microporous materials are obtained when using K2CO3, independently of carbonization temperature. Some of the materials were tested for CO2 capture due to their high microporosity and N content. The adsorption capacity for CO2 at atmospheric pressure and 0 °C achieves a value of ∼7.6 mmol CO2/g, which is among the largest reported in the literature. This study provides guidelines for the design of activated carbons with a proper N/C ratio for CO2 capture at atmospheric pressure.

Subsidence activity maps derived from DInSAR data: Orihuela case study

A new methodology is proposed to produce subsidence activity maps based on the geostatistical analysis of persistent scatterer interferometry (PSI) data. PSI displacement measurements are interpolated based on conditional Sequential Gaussian Simulation (SGS) to calculate multiple equiprobable realizations of subsidence. The result from this process is a series of interpolated subsidence values, with an estimation of the spatial variability and a confidence level on the interpolation. These maps complement the PSI displacement map, improving the identification of wide subsiding areas at a regional scale. At a local scale, they can be used to identify buildings susceptible to suffer subsidence related damages. In order to do so, it is necessary to calculate the maximum differential settlement and the maximum angular distortion for each building of the study area. Based on PSI-derived parameters those buildings in which the serviceability limit state has been exceeded, and where in situ forensic analysis should be made, can be automatically identified. This methodology has been tested in the city of Orihuela (SE Spain) for the study of historical buildings damaged during the last two decades by subsidence due to aquifer overexploitation. The qualitative evaluation of the results from the methodology carried out in buildings where damages have been reported shows a success rate of 100%.

Binap-silver-catalyzed enantioselective multicomponent 1,3-dipolar cycloaddition of azomethines ylides derived from ethyl glyoxylate

The enantioselective binap–silver catalyzed multicomponent 1,3-dipolar cycloaddition using ethyl glyoxylate, phenylalanine ethyl ester, and maleimides is described. The employment of basic silver carbonate allows the reaction to take place in the absence of an extra base giving high yields and ee. In addition, low-level calculations regarding the importance of the benzyl substituent at the α-position of the amino ester justify the expected absolute configuration of the final cycloadducts and the observed high enantiodiscrimination.

Pore size distributions derived from adsorption isotherms, immersion calorimetry, and isosteric heats: A comparative study

We compare the pore size distribution of a well-characterized activated carbon derived from model-dependent, adsorption integral equation (AIE) methods with those from model-independent, immersion calorimetry and isosteric heat analyses. The AIE approach applied to nitrogen gave a mean pore width of 0.57 nm; the CO2 distribution exhibited wider dispersion. Spherical model application to CO2 and diffusion limitations for nitrogen and argon were proposed as primary reasons for inconsistency. Immersion enthalpy revealed a sharp decrease in available area equivalent to a cut-off due to molecular exclusion when the accessible surface was assessed against probe kinetic diameter. Mean pore width was identified as 0.58 ± 0.02 nm, endorsing the underlying assumptions for the nitrogen-based AIE approach. A comparison of the zero-coverage isosteric heat of adsorption for various non-polar adsorptives by the porous test sample was compared with the same adsorptives in contact with a non-porous reference adsorbent, leading to an energy ratio or adsorption enhancement factor. A linear relationship between the energy ratio and probe kinetic diameter indicated a primary pore size at 0.59 nm. The advantage of this enthalpy, model-independent methods over AIE were due to no assumptions regarding probe molecular shape, and no assumptions for pore shape and/or connectivity.

15 anys de còmic-vinyetes a la Universitat d’Alacant: Unicòmic com a model acadèmic de didàctica i promoció de la lectura

El 2013 s’organitzaran les XV Jornades del Còmic de la Universitat d’Alacant-Unicòmic, celebrades ininterrompudament des del 1999. D’una petita proposta de l’alumnat, hem passat a unes jornades acadèmiques estables i reconegudes, centrades en les possibilitats didàctiques del nové art. Al llarg de les quinze edicions, hi han desfilat autors de renom internacional com Chris Claremont, Francisco Solano López o Carlos Giménez, a banda de nombrosos especialistes que ens van presentar els seus treballs al voltant del món de la historieta, com Álvaro Pons o Antonio Martín. En el següent estudi, s’hi fa un minuciós recorregut per l’organització i la història de les jornades tot destacant els moments més rellevants i la importància que han tingut aquestes jornades per al reconeixement de la narració gràfica com una forma d’expressió artística que, a l’igual que la literatura, ha de ser analitzada i treballada des de les aules universitàries, ja que ens pot beneficiar en l’ensenyament de molts àmbits d’investigació. Gràcies a Unicòmic, a la Universitat d’Alacant les vinyetes han deixat de considerar-se una distracció juvenil per a considerar-se una forma d’art equiparable a la literatura.

Single-cell derived clones from human adipose stem cells present different immunomodulatory properties

Human adipose mesenchymal stem cells are a heterogeneous population, where cell cultures derived from single cell-expanded clones present varying degrees of differential plasticity. This work focuses on the immunomodulatory/anti-inflammatory properties of these cells. To this end, 5 single cell clones were isolated (generally called 1.X and 3.X) from 2 volunteers. Regarding the expression level of the lineage-characteristic surface antigens, clones 1.10 and 1.22 expressed the lowest amounts, while clones 3.10 and 3.5 expressed more CD105 than the rest and clone 1.7 expressed higher amounts of CD73 and CD44. Regarding cytokine secretion, all clones were capable of spontaneously releasing high levels of IL-6 and low to moderate levels of IL-8. These differences can be explained in part by the distinct methylation profile exhibited by the clones. Furthermore and after lipopolysaccharide stimulation, clone 3.X produced the highest amounts of pro-inflammatory cytokines such as IL-1β, while clones 1.10 and 1.22 highly expressed IL-4 and IL-5. In co-culture experiments, clones 1.X are altogether more potent inhibitors than clones 3.X for proliferation of total, CD3+T, CD4+T and CD8+T lymphocytes and NK cells. The results of this work indicates that adipose stem cell population is heterogeneous in cytokine production profile, and that isolation, characterization and selection of the appropriate cell clone is a more exact method for the possible treatment of different patients or pathologies.

Hydrothermal Carbons from Hemicellulose-Derived Aqueous Hydrolysis Products as Electrode Materials for Supercapacitors

Acid pretreatment of lignocellulosic biomass, required for bioethanol production, generates large amounts of by-products, such as lignin and hydrolyzed hemicellulose fractions, which have found so far very limited applications. In this work, we demonstrate how the recovered hemicellulose hydrolysis products can be effectively utilized as a precursor for the synthesis of functional carbon materials through hydrothermal carbonization (HTC). The morphology and chemical structure of the synthesized HTC carbons are thoroughly characterized to highlight their similarities with glucose-derived HTC carbons. Furthermore, two routes for introducing porosity within the HTC carbon structure are presented: i) silica nanoparticle hard-templating, which is shown to be a viable method for the synthesis of carbonaceous hollow spheres; and ii) KOH chemical activation. The synthesized activated carbons (ACs) show an extremely high porosity (pore volume≈1.0 cm3 g−1) mostly composed of micropores (90 % of total pore volume). Because of their favorable textural properties, the ACs are further tested as electrodes for supercapacitors, yielding very promising results (300 F g−1 at 250 mA g−1) and confirming the high suitability of KOH-activated HTC carbons derived from spruce and corncob hydrolysis products as materials for electric double layer supercapacitors.

Key points for abolishing Female Genital Mutilation from the perspective of the men involved

Introduction: female Genital Mutilation is internationally considered an affront on human rights and an act of violence against women and young girls. Furthermore, it hierarchises and perpetuates inequality and denies the right to bodily and psychosocial integrity of women and young girls. Aims: to detect the key points for the abolition of Female Genital Mutilation as well as the necessary resources for its eradication. Material and Method: a qualitative methodology with an ethnonursing perspective, via semi-structured interviews, held both individually and in groups, in 21 men familiar with Female Genital Mutilation. Findings: through the voices of men familiar with this tradition, five key points are presented for its gradual eradication: sensitisation and awareness building, team action, abolition-promoting media, focusing action on rural areas and applying educational means before punitive ones. Conclusion and practical implications: awareness-raising via the combined efforts of families, communities and governments, together with the promotion of health education programmes in demonstrating the complications derived from this practice, play a vital part in eradicating Female Genital Mutilation.

Comparing Common Data Environment Platforms for Student Collaborative Working: A Case Study from Ulster University

PAS1192-2 (2013) outlines the “fundamental principles of Level 2 information modeling”, one of these principles is the use of what is commonly referred to as a Common Data Environment (CDE). A CDE could be described as an internet-enabled cloudhosting platform, accessible to all construction team members to access shared project information. For the construction sector to achieve increased productivity goals, the next generation of industry professionals will need to be educated in a way that provides them with an appreciation of Building Information Modelling (BIM) working methods, at all levels, including an understanding of how data in a CDE should be structured, managed, shared and published. This presents a challenge for educational institutions in terms of providing a CDE that addresses the requirements set out in PAS1192-2, and mirrors organisational and professional working practices without causing confusion due to over complexity. This paper presents the findings of a two-year study undertaken at Ulster University comparing the use of a leading industry CDE platform with one derived from the in-house Virtual Learning Environment (VLE), for the delivery of a student BIM project. The research methodology employed was a qualitative case study analysis, focusing on observations from the academics involved and feedback from students. The results of the study show advantages for both CDE platforms depending on the learning outcomes required.