Dynamic investigation of an ancient masonry bell tower with operational modal analysis: a non-destructive experimental technique to obtain the dynamic characteristics of a structure

This paper shows the results of an experimental analysis on the bell tower of “Chiesa della Maddalena” (Mola di Bari, Italy), to better understand the structural behavior of slender masonry structures. The research aims to calibrate a numerical model by means of the Operational Modal Analysis (OMA) method. In this way realistic conclusions about the dynamic behavior of the structure are obtained. The choice of using an OMA derives from the necessity to know the modal parameters of a structure with a non-destructive testing, especially in case of cultural-historical value structures. Therefore by means of an easy and accurate process, it is possible to acquire in-situ environmental vibrations. The data collected are very important to estimate the mode shapes, the natural frequencies and the damping ratios of the structure. To analyze the data obtained from the monitoring, the Peak Picking method has been applied to the Fast Fourier Transforms (FFT) of the signals in order to identify the values of the effective natural frequencies and damping factors of the structure. The main frequencies and the damping ratios have been determined from measurements at some relevant locations. The responses have been then extrapolated and extended to the entire tower through a 3-D Finite Element Model. In this way, knowing the modes of vibration, it has been possible to understand the overall dynamic behavior of the structure.

Checking the concurrence among macrobenthic organism distribution patterns at different taxonomic scales in relation to environmental factors

The interaction of both natural conditions and anthropogenic environmental impacts can lead to different soft-bottom macrobenthic distribution patterns. Soft-bottom macrobenthic community was analysed at different taxonomic scales in order to evaluate whether diverse subset of organisms respond to the variability of the environmental pressures (natural and human induced) showing or not similar distribution patterns. Therefore, this long-term survey had been focused on a heterogeneous area, where both anthropogenic and natural stress may affect the community. Three perpendicular transects to the coast were established and stations at 4, 10 and 15 m depths were sampled at each transect twice a year (summer- winter) from 2004 to 2009. Non-parametric multivariate techniques were used to analyse soft-bottom macrobenthic community distribution and its relation to the environmental factors. Similar distribution patterns between investigated taxonomic levels were detected and they were mainly related to depth.

Moisture Distribution in Partially Saturated Concrete Studied by Impedance Spectroscopy

The moisture content and its spatial distribution has a great influence on the durability properties of concrete structures. Several non-destructive techniques have been used for the determination of the total water content, but moisture distribution is difficult to determine. In this paper impedance spectroscopy is used to study the water distribution in concrete samples with controlled and homogeneously distributed moisture contents. The technique is suitable for the determination of water distribution inside the sample, using the appropriate equivalent circuits. It is shown that using the selected drying procedures there is no change in the solid phase of the samples, although the technique can only be used for the qualitative study of variations in the solid phase when samples are too thick. The results of this work show that for a wide range of concrete percentages of saturation, from full to 18 % saturation, practically all the pores keep at least a thin layer of electrolyte covering their walls, since the capacitance measurement results are practically independent of the saturation degree.

Direct versus indirect channels: Differentiated loss aversion in a high‐involvement, non‐frequently purchased hedonic product

Purpose – This article aims to investigate whether intermediaries reduce loss aversion in the context of a high-involvement non-frequently purchased hedonic product (tourism packages). Design/methodology/approach – The study incorporates the reference-dependent model into a multinomial logit model with random parameters, which controls for heterogeneity and allows representation of different correlation patterns between non-independent alternatives. Findings – Differentiated loss aversion is found: consumers buying high-involvement non-frequently purchased hedonic products are less loss averse when using an intermediary than when dealing with each provider separately and booking their services independently. This result can be taken as identifying consumer-based added value provided by the intermediaries. Practical implications – Knowing the effect of an increase in their prices is crucial for tourism collective brands (e.g. “sun and sea”, “inland”, “green destinations”, “World Heritage destinations”). This is especially applicable nowadays on account of the fact that many destinations have lowered prices to attract tourists (although, in the future, they will have to put prices back up to their normal levels). The negative effect of raising prices can be absorbed more easily via indirect channels when compared to individual providers, as the influence of loss aversion is lower for the former than the latter. The key implication is that intermediaries can – and should – add value in competition with direct e-tailing. Originality/value – Research on loss aversion in retailing has been prolific, exclusively focused on low-involvement and frequently purchased products without distinguishing the direct or indirect character of the distribution channel. However, less is known about other types of products such as high-involvement non-frequently purchased hedonic products. This article focuses on the latter and analyzes different patterns of loss aversion in direct and indirect channels.

Coupled Biomechanical Response of the Cornea Assessed by Non-Contact Tonometry. A Simulation Study

The mechanical response of the cornea subjected to a non-contact air-jet tonometry diagnostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the results obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three different sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uniform variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation determined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addition, a significant sensitivity of the apical displacement to the corneal stiffness was also obtained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in compression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a non-contact tonometry test is not sufficient to evaluate their individual contribution and a complete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior.

Evidence for non-conservative current-induced forces in the breaking of Au and Pt atomic chains

This experimental work aims at probing current-induced forces at the atomic scale. Specifically it addresses predictions in recent work regarding the appearance of run-away modes as a result of a combined effect of the non-conservative wind force and a ‘Berry force’. The systems we consider here are atomic chains of Au and Pt atoms, for which we investigate the distribution of break down voltage values. We observe two distinct modes of breaking for Au atomic chains. The breaking at high voltage appears to behave as expected for regular break down by thermal excitation due to Joule heating. However, there is a low-voltage breaking mode that has characteristics expected for the mechanism of current-induced forces. Although a full comparison would require more detailed information on the individual atomic configurations, the systems we consider are very similar to those considered in recent model calculations and the comparison between experiment and theory is very encouraging for the interpretation we propose.