Acceleration and Deflection Analysis for Class C Edge Protection Systems in Construction Work

The requirements for edge protection systems on most sloped work surfaces (class C, according to EN 13374-2013 code) in construction works are studied in this paper. Maximum deceleration suffered by a falling body and maximum deflection of the protection system were analyzed through finite-element models and confirmed through full-scale experiments. The aim of this work is to determine which value for deflection system entails a safe deceleration for the human body. This value is compared with the requirements given by the current version of EN 13374-2013. An additional series of experiments were done to determine the acceleration linked to minimum deflection required by code (200 mm) during the retention process. According to the obtained results, a modification of this value is recommended. Additionally, a simple design formula for this falling protection system is proposed as a quick tool for the initial steps of design.

Workshops in “Construction of Structures I”: A new teaching methodology in the Building Engineering Degree

Both the current economic situation in the construction sector and the continuous normative changes in the building area imply the use of new methodologies to enhance students’ competences in the degree of Building Engineer. The aim of this paper is to present, analyse and discuss the development of constructive workshops as a new teaching methodology used in the subject of Construction of Structures I at the University of Alicante to complement the constructive and technical knowledge acquired by our students and to enhance their communicative and representation skills essential for their professional practice in the future. The used methodology is based on the development of three-dimensional construction details (in groups of 3 or 4 students) to be shown in two A1-pannels exposed in the corridors of the Polytechnic School. Thus, students’ work approaches constructive problems in a global way by discussing simultaneously with teachers and other groups about the most suitable solution on each case. This contribution has multiperspective results and improves criticism of students in different areas, encouraging new learning strategies and active participation. What is more, on-line information and web applications have been used to prepare and organize this kind of workshops, allowing students to use new technologies as a complementary learning methodology. In conclusion, the use of these new workshops in the Degree of Building Engineer stimulates an interactive class versus a traditional lecture where the participative groups´ attitude and the development of oral presentations dissolve the traditional boundaries regarding public communication skills of the students in the Degree.

Las maquetas como material didáctico para la enseñanza y aprendizaje de la lectura e interpretación de planos en la ingeniería

Utilizamos las maquetas como herramientas auxiliares para proyectar y mostrar proyectos de ingeniería, pero también pueden ser un excelente material didáctico para la enseñanza y aprendizaje de la lectura, interpretación y realización de los planos que definen un proyecto o sus diferentes elementos. En este trabajo se refiere la experiencia realizada por los autores con los alumnos de Ingeniería Técnica de Obras Públicas dentro de la unidad de Interpretación de Planos de la asignatura de Sistemas de Representación. La dificultad que los alumnos de la materia tienen para interpretar el lenguaje, códigos y convenciones de la expresión gráfica está entre los motivos por los que se ha utilizado las maquetas como método de representación tridimensional que permite hacer comprensibles y fácilmente interpretadas las características constructivas de los diferentes elementos y las operaciones necesarias para pasar de la representación a la realización de la unidad de obra. En la comunicación se describe la actividad realizada con los alumnos, la selección de las unidades a representar, la elaboración de las maquetas y planos, poniendo especial acento en la concordancia entre la representación gráfica y el modelo tridimensional. Asimismo se han analizado las capacidades didácticas de uno de los trabajos realizados por los alumnos así como la evaluación y conclusiones de la experiencia realizada.

Image processing for safety assessment in Civil Engineering

Behaviour analysis of construction safety systems is of fundamental importance to avoid accidental injuries. Traditionally, measurements of dynamic actions in Civil Engineering have been done through accelerometers, but high-speed cameras and image processing techniques can play an important role in this area. Here, we propose using morphological image filtering and Hough transform on high-speed video sequence as tools for dynamic measurements on that field. The presented method is applied to obtain the trajectory and acceleration of a cylindrical ballast falling from a building and trapped by a thread net. Results show that safety recommendations given in construction codes can be potentially dangerous for workers.

3D teaching: the ideal complement for professionals in design and construction

Today, the requirement of professional skills to university students is constantly increasing in our society. In our opinion, the content offered in official degrees need to be nourished with different variables, enriching their global professional knowledge in a parallel way; that is why, in recent years, there is a great multiplicity of complementary courses at university. One of the most socially demanded technical requirements within the architectural, design or engineering field is the management of 3D drawing software, becoming an indispensable reality in these sectors. Thus, this specific training becomes essential over two-dimension traditional design, because the inclusion of great possibilities of spatial development that go beyond conventional orthographic projections (plans, sections or elevations), allowing modelling and rotation of the selected items from multiple angles and perspectives. Therefore, this paper analyzes the teaching methodology of a complementary course for those technicians in the construction industry interested in computer-aided design, using modelling (SketchupMake) and rendering programs (Kerkythea). The course is developed from the technician point of view, by learning computer management and its application to professional development from a more general to a more specific view through practical examples. The proposed methodology is based on the development of real examples in different professional environments such as rehabilitation, new constructions, opening projects or architectural design. This multidisciplinary contribution improves criticism of students in different areas, encouraging new learning strategies and the independent development of three-dimensional solutions. Thus, the practical implementation of new situations, even suggested by the students themselves, ensures active participation, saving time during the design process and the increase of effectiveness when generating elements which may be represented, moved or virtually tested. In conclusion, this teaching-learning methodology improves the skills and competencies of students to face the growing professional demands of society. After finishing the course, technicians not only improved their expertise in the field of drawing but they also enhanced their capacity for spatial vision; both essential qualities in these sectors that can be applied to their professional development with great success.

An Interdisciplinary Practical for Multimedia Engineering Students

Interdisciplinary projects in the industry typically require collaboration between professionals from various fields. However, this relationship is not generally addressed in the training offered by university programs, which often ignore this interdisciplinary approach. This paper offers an example of interdisciplinary interaction through joint laboratory activities in the curricula of two very different degree programs, i.e., Multimedia Engineering and Teacher Training in Primary Education. The programs' students formed an interdisciplinary team of multimedia engineers and trainee teachers to develop a Web product for children's cognitive development. The complexity of the task required students to engage in close and strong interdisciplinary cooperation and communication; in turn, they benefited from the synergy offered by collaborative work. The results of this paper, presented from the perspective of the multimedia engineering students, demonstrate a significant increase in their academic performance compared to the control group. This paper shows that university studies can incorporate an interdisciplinary perspective to engineering education without the need to introduce a specific course on the topic, thus avoiding further demands on the curriculum schedule.

Engineer Leandro Badarán’s project to safeguard the fortresses of Alicante in 1794

After the construction of the San Carlos bastion in Alicante in the final decade of the seventeenth century, and the great trench which the English built around the district of San Francisco during their years of dominance in the War of Succession, the waters of the San Blas gully caused serious damage to these fortifications of the city and to the trade buildings of the port. In 1772, the diversion canal was built. It was designed to divert the riverbed of the gully and send the waters directly to the sea. The project had been initially designed by the Engineer General, Jorge Próspero de Verboom in 1721. This unique work of engineering had some defects, principally in the breakwater which prevented the waters from flowing down the former river course. On several occasions, the water returned to its original riverbed due to the weakness of the breakwater, the narrowness of the channel’s bed and its lack of regularisation, causing serious damage to the bastion, the Babel-facing façade, the traders’ warehouses and other buildings. This study describes the project that the military engineer Leandro Badarán carried out in 1794 in order to technically improve this canal and examines his report on the state of the fortifications. Similar works built in Spain are also explained. It also analyses the repeated disputes between the war department and the port throughout these years over finding a technical solution to the problem.