Comparing the distribution of the electronic gap of an organic molecule with its photoluminescence spectrum

The electronic gap structure of the organic molecule N,N′-diphenyl-N,N′-bis(3-methylphenyl)-(1,1′-biphenyl)-4,4′-diamine, also known as TPD, has been studied by means of a Scanning Tunneling Microscope (STM) and by Photoluminescence (PL) analysis. Hundreds of current-voltage characteristics measured at different spots of the sample show the typical behavior of a semiconductor. The analysis of the curves allows to construct a gap distribution histogram which reassembles the PL spectrum of this compound. This analysis demonstrates that STM can give relevant information, not only related to the expected value of a semiconductor gap but also on its distribution which affects its physical properties such as its PL.

An inverse method to obtain porosity, fibre diameter and density of fibrous sound absorbing materials

Characterization of sound absorbing materials is essential to predict its acoustic behaviour. The most commonly used models to do so consider the flow resistivity, porosity, and average fibre diameter as parameters to determine the acoustic impedance and sound absorbing coefficient. Besides direct experimental techniques, numerical approaches appear to be an alternative to estimate the material’s parameters. In this work an inverse numerical method to obtain some parameters of a fibrous material is presented. Using measurements of the normal incidence sound absorption coefficient and then using the model proposed by Voronina, subsequent application of basic minimization techniques allows one to obtain the porosity, average fibre diameter and density of a sound absorbing material. The numerical results agree fairly well with the experimental data.

Detección de puntos débiles de aislamiento acústico en edificación ya construida

El aislamiento acústico es un problema de difícil solución una vez que la obra ya está acabada. En el caso de que la obra esté finalizada y no se cumplan con los valores de calidad acústicos que nos marca la legislación, deben detectarse los puntos débiles que provocan esa deficiencia de aislamiento acústico. La publicación de catálogos de soluciones constructivas hace que el problema no sea el material elegido, sino cómo se han unido estos materiales entre sí. Por tanto, debe analizarse este problema y buscar mecanismos con los que determinar los puntos débiles. En este trabajo se propone un método para la determinación de caminos débiles de transmisión entre un recinto emisor y un recinto receptor. El método obtiene el índice de reducción vibracional, como indicador de estos caminos débiles. Se muestran en el trabajo varios casos estudiados en el propio edificio, y cómo valorar la transmisión que debilita el aislamiento global de todo el conjunto constructivo.

Nuevos materiales absorbentes acústicos obtenidos a partir de restos de botellas de plástico

En el ámbito de acústica de la edificación es común el uso de materiales fibrosos como materiales absorbentes acústicos. Uno de estos materiales cada vez más utilizado es la lana de poliéster. Un problema que presenta el chip virgen de poliéster es que se obtiene del petróleo, cuyo precio no hace más que incrementarse en los últimos años. En este trabajo se presenta una lana de poliéster alternativa, obtenida mediante el tratamiento del PET, a través del conveniente ciclo de reciclado de botellas de plástico. Se comparan valores del coeficiente de absorción; en incidencia normal y en cámara reverberante de los materiales elaborados a partir de chip virgen y de las nuevas lanas obtenidas del PET. Además, se propone un modelo empírico de comportamiento acústico de estas nuevas lanas. Los resultados obtenidos han sido favorables, la fibra virgen ya ha sido sustituida por fibra reciclada en su proceso de fabricación.

Simultaneous synthesis of heat exchanger networks with pressure recovery: optimal integration between heat and work

The optimal integration between heat and work may significantly reduce the energy demand and consequently the process cost. This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs) in which the pressure levels of the process streams can be adjusted to enhance the heat integration. A superstructure is proposed for the HEN design with pressure recovery, developed via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation. The process conditions (stream temperature and pressure) must be optimized. Furthermore, the approach allows for coupling of the turbines and compressors and selection of the turbines and valves to minimize the total annualized cost, which consists of the operational and capital expenses. The model is tested for its applicability in three case studies, including a cryogenic application. The results indicate that the energy integration reduces the quantity of utilities required, thus decreasing the overall cost.

Nutrición y salud pública: políticas de alimentación escolar en la España contemporánea (1931-1978)

El trabajo aborda los antecedentes históricos de las políticas de alimentación escolar en la España del siglo XX, a través del análisis del corpus normativo y de los textos y materiales que generaron organismos nacionales e internacionales que participaron en su implementación. La investigación muestra el impacto que tuvo el contexto internacional y en particular los acuerdos que se alcanzaron durante el primer franquismo con los Estados Unidos y con la FAO y UNICEF, en el desarrollo de dichas políticas. El carácter filantrópico de las primeras cantinas fue sustituido por una creciente implicación del ámbito público, al incorporar la alimentación de los escolares como objetivo de las políticas sanitarias y educativas de la Segunda República. La Ley de Educación Primaria de 1945 permitió la gradual institucionalización de la alimentación escolar. La creación en 1954 del Servicio Escolar de Alimentación y Nutrición y la necesidad de coordinar la ayuda norteamericana facilitaron la implementación de programas como el de Productos Lácteos pro Bienestar Infantil y Social o el de Educación en Alimentación y Nutrición, lo cual permitió implantar el complemento alimenticio en escolares y llevar a cabo un conjunto de actividades educativas coordinadas encaminadas a mejorar su alimentación.

Repeatability, reproducibility, and accuracy of a novel pushbroom hyperspectral system

This study analyzes the repeatability, reproducibility and accuracy of a new hyperspectral system based on a pushbroom sensor as a means of measuring spectral features and color of materials and objects. The hyperspectral system consisted of a CCD camera, a spectrograph and an objective lens. An additional linear moving system allowed the mechanical scanning of the complete scene. A uniform overhead luminaire with daylight configuration was used to irradiate the scene using d:45 geometry. We followed the guidelines of the ASTM E2214-08 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments that define the standards and latest multidimensional procedures. The results obtained are analyzed in-depth and compared to those recently reported by other authors for spectrophotometers and multispectral systems. It can be concluded that hyperspectral systems are reliable and can be used in the industry to perform spectral and color readings with a high spatial resolution.

Nuevas herramientas para el estudio de la interacción entre especies en el espacio y en el tiempo

Las funciones de segundo orden son cada vez más empleadas en el análisis de procesos ecológicos. En este trabajo presentamos dos funciones de 2º orden desarrolladas recientemente que permiten analizar la interacción espacio-temporal entre dos especies o tipos funcionales de individuos. Estas funciones han sido desarrolladas para el estudio de interacciones entre especies en masas forestales a partir de la actual distribución diamétrica de los árboles. La primera de ellas es la función bivariante para procesos de puntos con marca Krsmm, que permite analizar la correlación espacial de una variable entre los individuos pertenecientes a dos especies en función de la distancia. La segunda es la función de reemplazo , que permite analizar la asociación entre los individuos pertenecientes a dos especies en función de la diferencia entre sus diámetros u otra variable asociada a dichos individuos. Para mostrar el comportamiento de ambas funciones en el análisis de sistemas forestales en los que operan diferentes procesos ecológicos se presentan tres casos de estudio: una masa mixta de Pinus pinea L. y Pinus pinaster Ait. en la Meseta Norte, un bosque de niebla de la Región Tropical Andina y el ecotono entre las masas de Quercus pyrenaica Willd. y Pinus sylvestris L. en el Sistema Central, en los que tanto la función Krsmm como la función r se utilizan para analizar la dinámica forestal a partir de parcelas experimentales con todos los árboles localizados y de parcelas de inventario.

Optimizing the number of stations in arrays measurements: experimental outcomes for different array geometries and the f-k method

Array measurements have become a valuable tool for site response characterization in a non-invasive way. The array design, i.e. size, geometry and number of stations, has a great influence in the quality of the obtained results. From the previous parameters, the number of available stations uses to be the main limitation for the field experiments, because of the economical and logistical constraints that it involves. Sometimes, from the initially planned array layout, carefully designed before the fieldwork campaign, one or more stations do not work properly, modifying the prearranged geometry. Whereas other times, there is not possible to set up the desired array layout, because of the lack of stations. Therefore, for a planned array layout, the number of operative stations and their arrangement in the array become a crucial point in the acquisition stage and subsequently in the dispersion curve estimation. In this paper we carry out an experimental work to analyze which is the minimum number of stations that would provide reliable dispersion curves for three prearranged array configurations (triangular, circular with central station and polygonal geometries). For the optimization study, we analyze together the theoretical array responses and the experimental dispersion curves obtained through the f-k method. In the case of the f-k method, we compare the dispersion curves obtained for the original or prearranged arrays with the ones obtained for the modified arrays, i.e. the dispersion curves obtained when a certain number of stations n is removed, each time, from the original layout of X geophones. The comparison is evaluated by means of a misfit function, which helps us to determine how constrained are the studied geometries by stations removing and which station or combination of stations affect more to the array capability when they are not available. All this information might be crucial to improve future array designs, determining when it is possible to optimize the number of arranged stations without losing the reliability of the obtained results.

Effects of high-color-discrimination capability spectra on color-deficient vision

Light sources with three spectral bands in specific spectral positions are known to have high-color-discrimination capability. W. A. Thornton hypothesized that they may also enhance color discrimination for color-deficient observers. This hypothesis was tested here by comparing the Rösch–MacAdam color volume for color-deficient observers rendered by three of these singular spectra, two reported previously and one derived in this paper by maximization of the Rösch–MacAdam color solid. It was found that all illuminants tested enhance discriminability for deuteranomalous observers, but their impact on other congenital deficiencies was variable. The best illuminant was the one derived here, as it was clearly advantageous for the two red–green anomalies and for tritanopes and almost neutral for red–green dichromats. We conclude that three-band spectra with high-color-discrimination capability for normal observers do not necessarily produce comparable enhancements for color-deficient observers, but suitable spectral optimization clearly enhances the vision of the color deficient.

Stability switches in a first-order complex neutral delay equation

Stability of the first-order neutral delay equation x’ (t) + ax’ (t – τ) = bx(t) + cx(t – τ) with complex coefficients is studied, by analyzing the existence of stability switches.

A Be-type star with a black-hole companion

Stellar-mass black holes have all been discovered through X-ray emission, which arises from the accretion of gas from their binary companions (this gas is either stripped from low-mass stars or supplied as winds from massive ones). Binary evolution models also predict the existence of black holes accreting from the equatorial envelope of rapidly spinning Be-type stars1, 2, 3 (stars of the Be type are hot blue irregular variables showing characteristic spectral emission lines of hydrogen). Of the approximately 80 Be X-ray binaries known in the Galaxy, however, only pulsating neutron stars have been found as companions2, 3, 4. A black hole was formally allowed as a solution for the companion to the Be star MWC 656 (ref. 5; also known as HD 215227), although that conclusion was based on a single radial velocity curve of the Be star, a mistaken spectral classification6 and rough estimates of the inclination angle. Here we report observations of an accretion disk line mirroring the orbit of MWC 656. This, together with an improved radial velocity curve of the Be star through fitting sharp Fe ii profiles from the equatorial disk, and a refined Be classification (to that of a B1.5–B2 III star), indicates that a black hole of 3.8 to 6.9 solar masses orbits MWC 656, the candidate counterpart of the γ-ray source AGL J2241+4454 (refs 5, 6). The black hole is X-ray quiescent and fed by a radiatively inefficient accretion flow giving a luminosity less than 1.6 × 10−7 times the Eddington luminosity. This implies that Be binaries with black-hole companions are difficult to detect in conventional X-ray surveys.

El Programa de Educación en Alimentación y Nutrición (1961-1982) y la capacitación de las amas de casa como responsables del bienestar familiar

El objetivo de este trabajo es analizar desde una perspectiva de género, a través del ejemplo del Programa de Educación en Alimentación y Nutrición (EDALNU) que se desarrolló en España en las décadas finales del siglo XX, los mensajes y estrategias de educación alimentaria nutricional que iban dirigidos a mejorar la capacitación de las amas de casa como garantes del bienestar familiar y como expertas en la gestión de los diversos aspectos del hogar. Su acción específica sobre las amas de casa y los argumentos sobre los que se sostenía dicha intervención afianzaron el modelo social de género en el que los hombres eran los únicos responsables de los recursos económicos del hogar y las mujeres las proveedoras de cuidados familiares y en concreto los relacionados con la alimentación y la nutrición.

Local probe of fractional edge states of S=1 Heisenberg spin chains

Spin chains are among the simplest physical systems in which electron-electron interactions induce novel states of matter. Here we propose to combine atomic scale engineering and spectroscopic capabilities of state of the art scanning tunnel microscopy to probe the fractionalized edge states of individual atomic scale S=1 spin chains. These edge states arise from the topological order of the ground state in the Haldane phase. We also show that the Haldane gap and the spin-spin correlation length can be measured with the same technique.

Quantum Hall effect in gapped graphene heterojunctions

We model the quantum Hall effect in heterostructures made of two gapped graphene stripes with different gaps, Δ1 and Δ2. We consider two main situations, Δ1=0,Δ2≠0, and Δ1=−Δ2. They are different in a fundamental aspect: only the latter features kink states that, when intervalley coupling is absent, are protected against backscattering. We compute the two-terminal conductance of heterostructures with channel length up to 430 nm, in two transport configurations, parallel and perpendicular to the interface. By studying the effect of disorder on the transport along the boundary, we quantify the robustness of kink states with respect to backscattering. Transport perpendicular to the boundary shows how interface states open a backscattering channel for the conducting edge states, spoiling the perfect conductance quantization featured by the homogeneously gapped graphene Hall bars. Our results can be relevant for the study of graphene deposited on hexagonal boron-nitride, as well as to model graphene with an interaction-driven gapped phase with two equivalent phases separated by a domain wall.