Dynamic visual servo control of a 4-axis joint tool to track image trajectories during machining complex shapes

A large part of the new generation of computer numerical control systems has adopted an architecture based on robotic systems. This architecture improves the implementation of many manufacturing processes in terms of flexibility, efficiency, accuracy and velocity. This paper presents a 4-axis robot tool based on a joint structure whose primary use is to perform complex machining shapes in some non-contact processes. A new dynamic visual controller is proposed in order to control the 4-axis joint structure, where image information is used in the control loop to guide the robot tool in the machining task. In addition, this controller eliminates the chaotic joint behavior which appears during tracking of the quasi-repetitive trajectories required in machining processes. Moreover, this robot tool can be coupled to a manipulator robot in order to form a multi-robot platform for complex manufacturing tasks. Therefore, the robot tool could perform a machining task using a piece grasped from the workspace by a manipulator robot. This manipulator robot could be guided by using visual information given by the robot tool, thereby obtaining an intelligent multi-robot platform controlled by only one camera.

Inclusion of immersive virtual learning environments and visual control systems to support the learning of students with Asperger syndrome

This paper presents the use of immersive virtual reality systems in the educational intervention with Asperger students. The starting points of this study are features of these students' cognitive style that requires an explicit teaching style supported by visual aids and highly structured environments. The proposed immersive virtual reality system, not only to assess the student's behavior and progress, but also is able to adapt itself to the student's specific needs. Additionally, the immersive reality system is equipped with sensors that can determine certain behaviors of the students. This paper determines the possible inclusion of immersive virtual reality as a support tool and learning strategy in these particular students' intervention. With this objective two task protocols have been defined with which the behavior and interaction situations performed by participant students are recorded. The conclusions from this study talks in favor of the inclusion of these virtual immersive environments as a support tool in the educational intervention of Asperger syndrome students as their social competences and executive functions have improved.

Control of Redundant Joint Structures Using Image Information During the Tracking of Non-Smooth Trajectories

Visual information is increasingly being used in a great number of applications in order to perform the guidance of joint structures. This paper proposes an image-based controller which allows the joint structure guidance when its number of degrees of freedom is greater than the required for the developed task. In this case, the controller solves the redundancy combining two different tasks: the primary task allows the correct guidance using image information, and the secondary task determines the most adequate joint structure posture solving the possible joint redundancy regarding the performed task in the image space. The method proposed to guide the joint structure also employs a smoothing Kalman filter not only to determine the moment when abrupt changes occur in the tracked trajectory, but also to estimate and compensate these changes using the proposed filter. Furthermore, a direct visual control approach is proposed which integrates the visual information provided by this smoothing Kalman filter. This last aspect permits the correct tracking when noisy measurements are obtained. All the contributions are integrated in an application which requires the tracking of the faces of Asperger children.

Direct Visual Servoing Framework based on Optimal Control for Redundant Joint Structures

This paper presents a new framework based on optimal control to define new dynamic visual controllers to carry out the guidance of any serial link structure. The proposed general method employs optimal control to obtain the desired behaviour in the joint space based on an indicated cost function which determines how the control effort is distributed over the joints. The proposed approach allows the development of new direct visual controllers for any mechanical joint system with redundancy. Finally, authors show experimental results and verifications on a real robotic system for some derived controllers obtained from the control framework.

Efficiency of a conductive cement-based anodic system for the application of cathodic protection, cathodic prevention and electrochemical chloride extraction to control corrosion in reinforced concrete structures

This article describes the research carried out regarding the application of cathodic protection (CP) and cathodic prevention (CPrev), in some cases with a pre-treatment of electrochemical chloride extraction (ECE), on representative specimens of reinforced concrete structures, using an anodic system consisting of a graphite-cement paste applied as a coating on the surface. The aim of this research is to find out the competence of this anode for the aforementioned electrochemical treatments. The efficiency of this anode has been clearly demonstrated, as well as its capability to apply a combined process of ECE and after CP.

Seguimiento y mejora de las asignaturas de segundo curso del Grado en Ingeniería Informática durante el curso 2013-2014

En esta memoria se describe el trabajo de la red docente para el seguimiento y control de calidad de las asignaturas del segundo curso del Grado en Ingeniería Informática impartido en la Escuela Politécnica Superior de la Universidad de Alicante. En esta edición, el trabajo de la red se ha centrado en el estudio de las necesidades formativas y los contenidos impartidos en las asignaturas. El resultado ha sido la creación de un grafo de dependencias entre asignaturas de segundo y primer curso (y de segundo curso entre sí), un mapa de necesidades formativas para acceder a las asignaturas de segundo curso y un mapa de los contenidos impartidos en éstas. Asimismo, se ha elaborado un calendario on-line de evaluaciones para el curso 2014-2015.

Estudio y planificación de contenidos, materiales y metodologías docentes según el EEES: Segundo Curso de Ingeniería Multimedia

En esta memoria se describe el proyecto llevado para establecer los mecanismos y procedimientos para el seguimiento y control de calidad de las asignaturas del segundo curso del Grado en Ingeniería Multimedia, curso 2013/2014. En concreto, los mecanismos de control se centran en la planificación de las sesiones docentes y las actividades de evaluación llevadas a cabo en cada una de dichas asignaturas.

Uso de Google Calendar para la coordinación entre asignaturas del Grado en Ingeniería Química

Uno de los aspectos peor valorados por los estudiantes de las nuevas titulaciones de grado es la coordinación entre asignaturas del mismo curso en cuanto a la distribución de controles y otro tipo de pruebas objetivas a lo largo del cuatrimestre, que afecta a la carga de trabajo no presencial en determinados momentos. En la guía docente de cada asignatura aparece la información sobre las pruebas a realizar dentro de un cronograma aproximado por semanas, y está disponible antes del comienzo del curso. Sin embargo, esa distribución puede variar ligeramente una vez empezado el curso debido a diversos motivos, y no se dispone de la información para todas las asignaturas del cuatrimestre en un mismo documento, lo que facilitaría su visualización. En este trabajo se propone el uso de la herramienta Google Calendar con el objetivo de tener un mayor control de este aspecto y poder detectar y corregir conflictos que puedan surgir, aplicándolo al Grado en Ingeniería Química.

Experiences on using Arduino for laboratory experiments of Automatic Control and Robotics

The free hardware platforms have become very important in engineering education in recent years. Among these platforms, Arduino highlights, characterized by its versatility, popularity and low price. This paper describes the implementation of four laboratory experiments for Automatic Control and Robotics courses at the University of Alicante, which have been developed based on Arduino and other existing equipment. Results were evaluated taking into account the views of students, concluding that the proposed experiments have been attractive to them, and they have acquired the knowledge about hardware configuration and programming that was intended.

Control and Guidance of Low-Cost Robots via Gesture Perception for Monitoring Activities in the Home

This paper describes the development of a low-cost mini-robot that is controlled by visual gestures. The prototype allows a person with disabilities to perform visual inspections indoors and in domestic spaces. Such a device could be used as the operator's eyes obviating the need for him to move about. The robot is equipped with a motorised webcam that is also controlled by visual gestures. This camera is used to monitor tasks in the home using the mini-robot while the operator remains quiet and motionless. The prototype was evaluated through several experiments testing the ability to use the mini-robot’s kinematics and communication systems to make it follow certain paths. The mini-robot can be programmed with specific orders and can be tele-operated by means of 3D hand gestures to enable the operator to perform movements and monitor tasks from a distance.

Coordinación para la planificación de la próxima acreditación del Grado en Ingeniería Química

El Grado en Ingeniería Química de la Universidad de Alicante, como muchas otras titulaciones, se encuentra en proceso de renovación de la acreditación nacional. La preparación para ello ha requerido un gran esfuerzo y coordinación de los profesores de la titulación, y el presente trabajo se ha desarrollado especialmente para afrontar el último tramo previo a la presentación de la documentación. Para ello, se han identificado los puntos fuertes de la titulación y los puntos con posibilidad de mejora en base a los criterios de ANECA, y se han realizado propuestas de mejora de los últimos mediante la coordinación de profesores y alumnos. Entre estas propuestas, se encuentra el uso de la herramienta Google Calendar con el objetivo de tener un mayor control de la carga de trabajo no presencial del alumnado, puesto que este aspecto es uno de los valorados con puntuación más baja en las encuestas realizadas por la Unidad Técnica de Calidad.