An isotopic analysis of geothermal brine and calcite scaling from the Blue Mountain geothermal field, Winnemucca, Nevada

Understanding, and controlling, the conditions under which calcite precipitates within geothermal energy production systems is a key step in maintaining production efficiency. In this study, I apply methods of bulk and clumped isotope thermometry to an operating geothermal energy facility in northern Nevada to see how those methods can better inform the facility owner, AltaRock Energy, Inc., about the occurrence of calcite scale in their power plant. I have taken water samples from five production wells, the combined generator effluent, shallow cold-water wells, monitoring wells, and surface water. I also collected calcite scale samples from within the production system. Water samples were analyzed for stable oxygen isotope composition (d18O). Calcite samples were analyzed for stable oxygen and carbon (d13C) composition, and clumped isotope composition (D47). With two exceptions, the water compositions are very similar, likely indicating common origin and a well-mixed hydrothermal system. The calcite samples are likewise similar to one another. Apparent temperatures calculated from d18O values of water and calcite are lower than those recorded for the system. Apparent temperatures calculated from D47 are several degrees higher than the recorded well temperatures. The lower temperatures from the bulk isotope data are consistent with temperatures that could be expected during a de-pressurization of the production system, which would cause boiling in the pipes, a reduction in system temperature, and rapid precipitation of calcite scale. However, the high apparent temperature indicated by the D47 data suggests that the calcite is depleted in clumped isotopes given the known temperature of the system, which is inconsistent with this hypothesis. This depletion could instead result from disequilibrium isotopic fractionation during the aforementioned boil events, which would make both the apparent d18O-based and D47-based temperatures unrepresentative of the actual water temperature. This research can help improve our understanding of how isotopic analyses can better inform us about the movement of water through geothermal systems of the past and how it now moves through modern systems. Increased understanding of water movement in these systems could potentially allow for more efficient utilization of geothermal energy as a renewable resource.

Geomorphic Impacts of the 2013 Colorado Front Range Flood on Black Canyon Creek and North Fork Big Thompson River

In September 2013, the Colorado Front Range experienced a five-day storm that brought record-breaking precipitation to the region. As a consequence, many Front Range streams experienced flooding, leading to erosion, debris flows, bank failures and channel incision. I compare the effects that debris flows and flooding have on the channel bar frequency, frequency and location of wood accumulation, and on the shape and size of the channel along two flood impacted reaches located near Estes Park and Glen Haven, Colorado within Rocky Mountain National Park and Arapaho-Roosevelt National Forest: Black Canyon Creek (BCC) and North Fork Big Thompson River (NFBT). The primary difference between the two study areas is that BCC was inundated by multiple debris flows, whereas NFBT only experienced flooding. Fieldwork consisted of recording location and size of large wood and channel bars and surveying reaches to produce cross-sections. Additional observations were made on bank failures in NFBT and the presence of boulders in channel bars in BCC to determine sediment source. The debris flow acted to scour and incise BCC causing long-term alteration. The post-flood channel cross-sectional area is as much as 7 to 23 times larger than the pre-flood channel, caused by the erosion of the channel bed to bedrock and the elimination of riparian vegetation. Large wood was forced out of the stream channel and deposited outside of the bankfull channel. Flooding in NFBT caused bank erosion and widening that contributed sediment to channel bars, but accomplished little stream-bed scour. As a result, there was relatively little damage to mid-channel and riparian vegetation, and most large wood remained within the wetted channel.

Geology and landslide geomorphology of the Burpee Hills, Skagit County, Washington, USA

Landforms within the Skagit Valley record a complex history of land evolution from Late Pleistocene to the present. Late Pleistocene glacial deposits and subsequent incision by the Skagit River formed the Burpee Hills terrace. The Burpee Hills comprises an approximately 205-m-thick sequence of sediments, including glacio-lacustrine silts and clays, overlain by sandy advance outwash and capped by coarse till, creating a sediment-mantled landscape where mass wasting occurs in the form of debris flows and deep-seated landslides (Heller, 1980; Skagit County, 2014). Landslide probability and location are necessary metrics for informing citizens and policy makers of the frequency of natural hazards. Remote geomorphometric analysis of the site area using airborne LiDAR combined with field investigation provide the information to determine relative ages of landslide deposits, to classify geologic units involved, and to interpret the recent hillslope evolution. Thirty-two percent of the 28-km2 Burpee Hills landform has been mapped as landslide deposits. Eighty-five percent of the south-facing slope is mapped as landslide deposits. The mapped landslides occur predominantly within the advance outwash deposits (Qgav), this glacial unit has a slope angle ranging from 27 to 36 degrees. Quantifying surface roughness as a function of standard deviation of slope provides a relative age of landslide deposits, laying the groundwork for frequency analysis of landslides on the slopes of the Burpee Hills. The south-facing slopes are predominately affected by deep-seated landslides as a result of Skagit River erosion patterns within the floodplain. The slopes eroded at the toe by the Skagit River have the highest roughness coefficients, suggesting that areas with more frequent disturbance at the toe are more prone to sliding or remobilization. Future work including radiocarbon dating and hydrologic-cycle investigations will provide a more accurate timeline of the Burpee Hills hillslope evolution, and better information for emergency management and planners in the future.

Linking surficial geomorphology with vertical structure in high and low energy marine environments

Senior thesis written for Oceanography 445

Quantifying and Modeling the Influence of Forest on the Magnitude and Duration of Mountain Snow Storage in the Pacific Northwest, USA

Thesis (Ph.D.)--University of Washington, 2016-08