Decompositions of complete tripartite graphs into triangles with an edge attached

Let K(r, s, t) denote the complete tripartite graph with partite sets of size r, s and t, where r less than or equal to s less than or equal to t. Let D be the graph consisting of a triangle with an edge attached. We show that K(r, s, t) may be decomposed into copies of D if and only if 4 divides rs + st + rt and t less than or equal to 3rs/(r + s).

Decompositions of complete graphs into triangles and Hamilton cycles

For all odd integers n greater than or equal to 1, let G(n) denote the complete graph of order n, and for all even integers n greater than or equal to 2 let G,, denote the complete graph of order n with the edges of a 1-factor removed. It is shown that for all non-negative integers h and t and all positive integers n, G, can be decomposed into h Hamilton cycles and t triangles if and only if nh + 3t is the number of edges in G(n). (C) 2004 Wiley Periodicals, Inc.

Genetic algorithm optimization of adaptive multi-scale GLCM features

We introduce a new second-order method of texture analysis called Adaptive Multi-Scale Grey Level Co-occurrence Matrix (AMSGLCM), based on the well-known Grey Level Co-occurrence Matrix (GLCM) method. The method deviates significantly from GLCM in that features are extracted, not via a fixed 2D weighting function of co-occurrence matrix elements, but by a variable summation of matrix elements in 3D localized neighborhoods. We subsequently present a new methodology for extracting optimized, highly discriminant features from these localized areas using adaptive Gaussian weighting functions. Genetic Algorithm (GA) optimization is used to produce a set of features whose classification worth is evaluated by discriminatory power and feature correlation considerations. We critically appraised the performance of our method and GLCM in pairwise classification of images from visually similar texture classes, captured from Markov Random Field (MRF) synthesized, natural, and biological origins. In these cross-validated classification trials, our method demonstrated significant benefits over GLCM, including increased feature discriminatory power, automatic feature adaptability, and significantly improved classification performance.

Social indicators and comparisons of living standards

Construction of an international index of standards of living, incorporating social indicators and economic output, typically involves scaling and weighting procedures that lack welfare-economic foundations. Revealed preference axioms can be used to make quality-of-life comparisons if we can estimate the representative household's production technology for the social indicators. This method is applied to comparisons of gross domestic product (GDP) and life expectancy for 58 countries. Neither GDP rankings, nor the rankings of the Human Development Index (HDI), are consistent with the partial ordering of revealed preference. A method of constructing a utility-consistent index incorporating both consumption and life expectancy is suggested. (C) 2003 Elsevier Science B.V. All rights reserved.

Purchasing Power Parities for Industry Comparisons Using Weighted Elteto-Koves-Szulc (EKS) Methods

This study has three main objectives. First, it develops a generalization of the commonly used EKS method to multilateral price comparisons. It is shown that the EKS system can be generalized so that weights can be attached to each of the link comparisons used in the EKS computations. These weights can account for differing levels of reliability of the underlying binary comparisons. Second, various reliability measures and corresponding weighting schemes are presented and their merits discussed. Finally, these new methods are applied to an international data set of manufacturing prices from the ICOP project. Although theoretically superior, it appears that the empirical impact of the weighted EKS method is generally small compared to the unweighted EKS. It is also found that this impact is larger when it is applied at lower levels of aggregation. Finally, the importance of using sector specific PPPs in assessing relative levels of manufacturing productivity is indicated.

Capturing expert knowledge for threatened species assessments: a case study using NatureServe conservation status ranks

Assessments for assigning the conservation status of threatened species that are based purely on subjective judgements become problematic because assessments can be influenced by hidden assumptions, personal biases and perceptions of risks, making the assessment process difficult to repeat. This can result in inconsistent assessments and misclassifications, which can lead to a lack of confidence in species assessments. It is almost impossible to Understand an expert's logic or visualise the underlying reasoning behind the many hidden assumptions used throughout the assessment process. In this paper, we formalise the decision making process of experts, by capturing their logical ordering of information, their assumptions and reasoning, and transferring them into a set of decisions rules. We illustrate this through the process used to evaluate the conservation status of species under the NatureServe system (Master, 1991). NatureServe status assessments have been used for over two decades to set conservation priorities for threatened species throughout North America. We develop a conditional point-scoring method, to reflect the current subjective process. In two test comparisons, 77% of species' assessments using the explicit NatureServe method matched the qualitative assessments done subjectively by NatureServe staff. Of those that differed, no rank varied by more than one rank level under the two methods. In general, the explicit NatureServe method tended to be more precautionary than the subjective assessments. The rank differences that emerged from the comparisons may be due, at least in part, to the flexibility of the qualitative system, which allows different factors to be weighted on a species-by-species basis according to expert judgement. The method outlined in this study is the first documented attempt to explicitly define a transparent process for weighting and combining factors under the NatureServe system. The process of eliciting expert knowledge identifies how information is combined and highlights any inconsistent logic that may not be obvious in Subjective decisions. The method provides a repeatable, transparent, and explicit benchmark for feedback, further development, and improvement. (C) 2004 Elsevier SAS. All rights reserved.

The price elasticity of the Euro to movements in foreign reserves through European Central Bank intevention

The Euro has been used as the largest weighting element in a basket of currencies for forex arrangements adopted by several Central European countries outside the European Union (EU). The paper uses a new time-series approach to examine the relationship between the Euro exchange rate and the level of foreign reserves. It employs Zero-no-zero (ZNZ) patterned vector error-correction (VECM) modelling to investigate Granger causal relations among foreign reserves, the European Monetary Union money supply and the Euro exchange rate. The findings confirm that foreign reserves may influence movements in the Euro's exchange rate. Further, ZNZ patterned VECM modelling with exogenous variables is used to estimate the amount of foreign reserves currently required in order to again achieve a targetted Euro exchange rate

Investigations into a wideband spatial beamformer employing a rectangular array of planar monopoles

This paper presents a rectangular array antenna with a suitable signal-processing algorithm that is able to steer the beam in azimuth over a wide frequency band. In the previous approach, which was reported in the literature, an inverse discrete Fourier transform technique was proposed for obtaining the signal weighting coefficients. This approach was demonstrated for large arrays in which the physical parameters of the antenna elements were not considered. In this paper, a modified signal-weighting algorithm that works for arbitrary-size arrays is described. Its validity is demonstrated in examples of moderate-size arrays with real antenna elements. It is shown that in some cases, the original beam-forming algorithm fails, while the new algorithm is able to form the desired radiation pattern over a wide frequency band. The performance of the new algorithm is assessed for two cases when the mutual coupling between array elements is both neglected and taken into account.

Export processing zones and growth triangle development: The case of the BIMP-EAGA, Southeast Asia

Exorts processing zones (EPZs) and growth triangles have been two common Asian initiatives to increase wealth and regional competitiveness in the world economy. Since they are seldom analysed jointly, this paper investigates their mutuality in the development process. Taking the problematic case of the Brunei-Indonesia-Malaysia-Philippines East ASEAN Growth Area (BIMP-EAGA) triangle, we explore the role of EPZs in enhancing regional collaboration, competitiveness, and domestic linkages. Despite the triangle's weak economic complementarities, its processing zones are found capable of advancing development by furthering opportunities in regionalisation/localisation of production. Latterly, trade and investment liberalisation within ASEAN raises broad questions about the rationale of EPZs and growth triangles. Zone-triangle nexuses will require rethinking as, under different regulatory conditions, the zones compete more directly across ASEAN and also with global rivals. Copyright © 2005 John Wiley & Sons, Ltd.

A wideband array antenna with beam-steering capability using real valued weights

This article presents an array antenna with beam-steering capability in azimuth over a wide frequency band using real-valued weighting coefficients that can be realized in practice by amplifiers or attenuators. The described beamforming scheme relies on a 2D (instead of 1D) array structure in order to make sure that there are enough degrees of freedom to realize a given radiation pattern in both the angular and frequency domains. In the presented approach, weights are determined using an inverse discrete Fourier transform (IDFT) technique by neglecting the mutual coupling between array elements. Because of the presence of mutual coupling, the actual array produces a radiation pattern with increased side-lobe levels. In order to counter this effect, the design aims to realize the initial radiation pattern with a lower side-lobe level. This strategy is demonstrated in the design example of 4 X 4 element array. (C) 2005 Wiley Periodicals. Inc.

Assessing facial approximation accuracy: How do resemblance ratings of disparate faces compare to recognition tests?

In the past, the accuracy of facial approximations has been assessed by resemblance ratings (i.e., the comparison of a facial approximation directly to a target individual) and recognition tests (e.g., the comparison of a facial approximation to a photo array of faces including foils and a target individual). Recently, several research studies have indicated that recognition tests hold major strengths in contrast to resemblance ratings. However, resemblance ratings remain popularly employed and/or are given weighting when judging facial approximations, thus indicating that no consensus has been reached. This study aims to further investigate the matter by comparing the results of resemblance ratings and recognition tests for two facial approximations which clearly differed in their morphological appearance. One facial approximation was constructed by an experienced practitioner privy to the appearance of the target individual (practitioner had direct access to an antemortem frontal photograph during face construction), while the other facial approximation was constructed by a novice under blind conditions. Both facial approximations, whilst clearly morphologically different, were given similar resemblance scores even though recognition test results produced vastly different results. One facial approximation was correctly recognized almost without exception while the other was not correctly recognized above chance rates. These results suggest that resemblance ratings are insensitive measures of the accuracy of facial approximations and lend further weight to the use of recognition tests in facial approximation assessment. (c) 2006 Elsevier Ireland Ltd. All rights reserved.

Fully spatial wide-band beamforming using a rectangular array of planar monopoles

This paper describes a spatial beamformer which by using a rectangular array antenna steers a beam in azimuth over a wide frequency band without frequency filters or tap-delay networks. The weighting coefficients are real numbers which can be realized by attenuators or amplifiers. A prototype including a 4 x 4 array of square planar monopoles and a feeding network composed of attenuators, power divider/combiners and a rat-race hybrid is developed to test the validity of this wide-band beamforming concept. The experimental results prove the validity of this wide-band spatial beamformer for small size arrays.

Assessing the quality of risk factor survey data: lessons from the WHO MONICA Project

Background and purpose Survey data quality is a combination of the representativeness of the sample, the accuracy and precision of measurements, data processing and management with several subcomponents in each. The purpose of this paper is to show how, in the final risk factor surveys of the WHO MONICA Project, information on data quality were obtained, quantified, and used in the analysis. Methods and results In the WHO MONICA (Multinational MONItoring of trends and determinants in CArdiovascular disease) Project, the information about the data quality components was documented in retrospective quality assessment reports. On the basis of the documented information and the survey data, the quality of each data component was assessed and summarized using quality scores. The quality scores were used in sensitivity testing of the results both by excluding populations with low quality scores and by weighting the data by its quality scores. Conclusions Detailed documentation of all survey procedures with standardized protocols, training, and quality control are steps towards optimizing data quality. Quantifying data quality is a further step. Methods used in the WHO MONICA Project could be adopted to improve quality in other health surveys.