N-Substituent effect of maleimides on acrylate polymerization initiated by three-component systems

In this paper, the relative photopolymerization efficiency for polymerization of a difunctional acrylate initiated by various N-substituted maleimides in the presence of amine and benzophenone are compared on the basis of a photo-differential scanning calorimetry (photo-DSC) study. The trends in the polymerization rates were obtained from the photopolymerization profiles and expressed in terms of a photoinitiation index, I-p. An N-substituent index, I-s, which indicates whether each N-substituent plays either a positive (when I-s > 1) or a negative (when I-s < 1) role in the initiation process relative to MI (unsubstituted maleimide), was determined. (C) 2003 Society of Chemical Industry.

Quantitative prediction of phase diagrams for polymer partitioning in aqueous two-phase systems

Published polymer distribution data for aqueous poly(ethylene glycol)/dextran mixtures have been reassessed to illustrate the feasibility of their quantitative characterization in terms of the Flory-Huggins theory of polymer thermodynamics. Phase diagrams predicted by this characterization procedure provide better descriptions of the experimental data than those based on an earlier, oversimplified treatment in similar terms. (C) 2003 Wiley Periodicals, Inc.

Hydrodynamics and mass transfer coefficient in three-phase air-lift reactors containing activated sludge

This study was to investigate the impacts of operating conditions and liquid properties on the hydrodynamics and volumetric mass transfer coefficient in activated sludge air-lift reactors. Experiments were conducted in internal and external air-lift reactors. The activated sludge liquid displayed a non-Newtonian rheological behavior. With an increase in the superficial gas velocity, the liquid circulation velocity, gas holdup and mass transfer coefficient increased, and the gas residence time decreased. The liquid circulation velocity, gas holdup and the mass transfer coefficient decreased as the sludge loading increased. The flow regime in the activated sludge air-lift reactors had significant effect on the liquid circulation velocity and the gas holdup, but appeared to have little impact on the mass transfer coefficient. The experimental results in this study were best described by the empirical models, in which the reactor geometry, superficial gas velocity and/or power consumption unit, and solid and fluid properties were employed. (c) 2006 Elsevier B.V. All rights reserved.

Analysis of the phase behavior of the aqueous poly(ethylene glycol)-Ficoll system

The PEG-Ficoll polymer phase system is one that has been overlooked in the past for biotechnology applications because of the stability of its emulsions. However, new applications, such as emulsion coating of cells, are appearing that rely on this very property. Ficoll is highly polydisperse and multimodal with three distinct Ficoll peaks in gel permeation chromatography. As a result, the transition between one-phase and two-phase systems is blurred and the binodials obtained through turbidometric titration and tie-line analysis differ significantly. Moreover, since the three Ficoll peaks partition differently, tie-line analysis cannot be described by a simple model of the aqueous two-phase system. A simple modification to the model allowed for excellent fit, and this modification may prove well-suited for the many practical cases where aqueous two-phase systems fail to display parallel tie-lines as implicitly assumed in the simpler model.

Experimental manipulation of prior experience: Effects on item and associative recognition

Frequency of exposure to very low- and high-frequency words was manipulated in a three-phase (familiarisation, study, and test) design. During familiarisation, words were presented with their definition (once, four times, or not presented). One week (Experiment 1) or one day (Experiment 2) later, participants studied a list of homogeneous pairs (i.e., pair members were matched on background and familiarisation frequency). Item and associative recognition of high- and very low-frequency words presented in intact, rearranged, old-new, or new-new pairs were tested in Experiment 1. Associative recognition of very low-frequency words was tested in Experiment 2. Results showed that prior familiaris ation improved associative recognition of very low-frequency pairs, but had no effect on high-frequency pairs. The role of meaning in the formation of item-to-item and item-to-context associations and the implications for current models of memory are discussed.

Layered silicate nanocomposites based on various high-functionality epoxy resins: The influence of an organoclay on resin cure

The influence of an organically modified clay on the curing behavior of three epoxy systems widely used in the aerospace industry and of different structures and functionalities, was studied. Diglycidyl ether of bisphenol A (DGEBA), triglycidyl p-amino phenol (TGAP) and tetraglycidyl diamino diphenylmethane (TGDDM) were mixed with an octadecyl ammonium ion modified organoclay and cured with diethyltoluene diamine (DETDA). The techniques of dynamic mechanical thermal analysis (DMTA), chemorheology and differential scanning calorimetry (DSC) were applied to investigate gelation and vitrification behavior, as well as catalytic effects of the clay on resin cure. While the formation of layered silicate nanocomposite based on the bifunctional DGEBA resin has been previously investigated to some extent, this paper represents the first detailed study of the cure behavior of different high performance, epoxy nanocomposite systems.

Effect of particle hydrophobicity on particle and water transport across a flotation froth

Froth recovery measurements have been conducted in both the presence (three-phase froth) and absence (two-phase froth) of particles of different contact angles in a specially modified laboratory flotation column. Increasing the particle hydrophobicity increased the flow rate of particles entering the froth, while the recovery of particles across the froth phase itself also increased for particle contact angles to 63 and at all vertical heights of the froth column. However, a further increase in the contact angle to 69 resulted in lower particle recovery across the froth phase. The reduced froth recovery for particles of 69 contact angle was linked to significant bubble coalescence within the froth phase. The reduced froth recovery occurred uniformly across the entire particle size range, and was, presumably, a result of particle detachment from coalescing bubbles. Water flow rates across the froth phase also varied with particle contact angle. The general trend was a decrease in the concentrate flow rate of water with increasing particle contact angle. An inverse relationship between water flow rate and bubble radius was also observed, possibly allowing prediction of water flow rate from bubble size measurements in the froth. Comparison of the froth structure, defined by bubble size, gas hold-up and bubble layer thickness, for two- and three-phase froths, at the same frother concentration, showed there was a relationship between water flow rate and froth structure. (c) 2005 Elsevier B.V. All rights reserved.

Using different structure types of microemulsions for the preparation of poly(alkylcyanoacrylate) nanoparticles by interfacial polymerization

A phase diagram of the pseudoternary system ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with butanol as a cosurfactant was prepared. Areas containing optically isotropic, low viscosity one-phase systems were identified and systems therein designated as w/o droplet-, bicontinuous- or solution-type microemulsions using conductivity, viscosity, cryo-field emission scanning electron microscopy and self-diffusion NMR. Nanoparticles were prepared by interfacial polymerization of selected w/o droplet, bicontinuous- or solution-type microemulsions with ethyl-2-cyanoacrylate. Morphology of the particles and entrapment of the water-soluble model protein ovalbumin were investigated. Addition of monomer to the different types of microemulsions (w/o droplet, bicontinuous, solution) led to the formation of nanoparticles, which were similar in size (similar to 250 nm), polydispersity index (similar to 0.13), zeta-potential (similar to-17 mV) and morphology. The entrapment of the protein within these particles was up to 95%, depending on the amount of monomer used for polymerization and the type of microemulsion used as a polymerization template. The formation of particles with similar characteristics from templates having different microstructure is surprising, particularly considering that polymerization is expected to occur at the water-oil interface by base-catalysed polymerization. Dynamics within the template (stirring, viscosity) or indeed interfacial phenomena relating to the solid-liquid interface appear to be more important for the determination of nanoparticle morphology and characteristics than the microstructure of the template system. (c) 2005 Elsevier B.V. All rights reserved.

Grammatical sensitivity: Its origins and potential contribution to early word reading skill

A three-phase longitudinal study examined the origins of grammatical sensitivity and its usefulness as a predictor of early word-level reading. At about 4 years of age, children were given a range of language and cognitive tests. One year later, the children were given a further series of language and cognitive tests, this time including grammatical sensitivity, phonological sensitivity, and nonword repetition. Another year later, word-level reading achievement was assessed. Overall, grammatical sensitivity and phonological sensitivity were more firmly grounded in earlier language ability than in cognitive ability. Phonological sensitivity and nonword repetition showed reliable predictive associations with subsequent word reading skills. Grammatical sensitivity did not. (c) 2005 Elsevier Inc. All rights reserved.

Preparation of poly (alkylcyanoacrylate) nanoparticles by polymerization of water-free microemulsions

Phase diagrams of the pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and propylene glycol with and without butanol as a co-surfactant were prepared. Areas containing optically isotropic, one-phase systems were identified and samples therein designated as droplet, bicontinuous or solution type microemulsions using conductivity, viscosity and self-diffusion NMR. Nanoparticles were prepared by polymerization of selected microemulsions with ethyl-2-cyanoacrylate and the morphology of the particles was investigated. Addition of monomer to all types of microemulsions led to the formation of nanoparticles, which had an average size of 244 +/- 25 nm, an average polydispersity index of 0.15 +/- 0.04 and a zeta-potential of -17 +/- 3 mV. The formation of particles from water-free microemulsions of different types is surprising, particularly considering that polymerization is expected to occur at a water-oil interface by base-catalysed polymerization. It would appear that propylene glycol is sufficiently nucleophilic to initiate the polymerization. The use of water-free microemulsions as templates for the preparation of poly (alkylcyanoacrylate) nanoparticles opens up interesting opportunities for the encapsulation of bioactives which do not have suitable properties for encapsulation on the basis of water-containing microemulsions.

Fast-tracking middle schooling reform: A model for the integrated curriculum

To participate effectively in the post-industrial information societies and knowledge/service economies of the 21st century, individuals must be better-informed, have greater thinking and problem-solving abilities, be self-motivated; have a capacity for cooperative interaction; possess varied and specialised skills; and be more resourceful and adaptable than ever before. This paper reports on one outcome from a national project funded by the Ministerial Council on Education, Employment Training and Youth Affairs, which investigated what practices, processes, strategies and structures best promote lifelong learning and the development of lifelong learners in the middle years of schooling. The investigation linked lifelong learning with middle schooling because there were indications that middle schooling reform practices also lead to the development of lifelong learning attributes, which is regarded as a desirable outcome of schooling in Australia. While this larger project provides depth around these questions, this paper specifically reports on the development of a three-phase model that can guide the sequence in which schools undertaking middle schooling reform attend to particular core component changes. The model is developed from the extensive analysis of 25 innovative schools around the nation, and provides a unique insight into the desirable sequences and time spent achieving reforms, along with typical pitfalls that lead to a regression in the reform process. Importantly, the model confirms that schooling reform takes much more time than planners typically expect or allocate, and there are predictable and identifiable inhibitors to achieving it.

An exploration of the needs and goals of the health professional and patient in a medical consultation

This Study is the first phase of a three-phase study continuing over three years. Twent)' health professionals from different disciplinary backgrounds (medical doctors, nurses, allied health professionals) and 20 patients across a range of medical condidons, education, gender, and socio-economic backgrounds, pardcipated in one-on-one semi-structured interviews. Participants described their experiences and percepdons of both effecdve and sadsfying medical consultations and dissadsf)'ing and ineffecdve ones. They also discussed their individual goals and needs in the consultation process. Results indicated that while there were some similarides in consultation goals and needs between health professionals, there were also clear differences across the different discipUnes. In addition, there were clear differences in goals and needs across the twenty padents. These findings are discussed within the framework of communicadon accommodadon theor}' (CAT) and the linguisdc model of padent pardcipadon (LMOPP) and focus on understanding the different dynamics that underpin varying health professional and padent interacdons.