Determination of the hemispheric character (i.e. southern or northern latitudinal position) of equatorial ionosonde stations as deduced from long-term recordings of the minimum height of the F-region (h ' F)

The virtual (or minimum) height of the F-region (h'F), recorded over a number of solar cycles for I I equatorial and mid-latitude ionosonde stations, was used to deduce the hemispheric (i.e. southern or northern hemisphere) character of equatorial stations. The semi-annual median monthly height (h'F) variations consist of two components: major local summer maximum and winter sub-maximum (about 5 percent of the summer maximum). This hemispheric pattern was most consistently observed for equatorial stations (within 5degrees of the geomagnetic equator) in a period centred on the local midnight (21-03 LT) but was also present, to a lesser extent, at mid-latitude stations and at other time intervals. It is evident that the physical parameter h'F defines the hemispheric character of an equatorial station which has different (sometimes opposite) geographic and geomagnetic latitudes. There is a sharp transition in the latitudinal character of the stations on both sides of the equator leading to hypothesis that the equal maxima in h'F in December and June solstices are observed at a near-equator position labelled as ionosonde deduced equator (IDE). Such a signature was observed for an American equatorial (both geographic and geomagnetic) station Talara (Peru) which is an experimental support of the hypothesis. The IDE can be another useful parameter characterising the equatorial ionosphere. This finding reveals a new application of the standard ionosonde data in defining the geophysical character of equatorial stations, being an important contribution to space climatology. (C) 2002 Elsevier Science Ltd. All rights reserved.

Development and evaluation of neural network freeway incident detection models using field data

This paper discusses a multi-layer feedforward (MLF) neural network incident detection model that was developed and evaluated using field data. In contrast to published neural network incident detection models which relied on simulated or limited field data for model development and testing, the model described in this paper was trained and tested on a real-world data set of 100 incidents. The model uses speed, flow and occupancy data measured at dual stations, averaged across all lanes and only from time interval t. The off-line performance of the model is reported under both incident and non-incident conditions. The incident detection performance of the model is reported based on a validation-test data set of 40 incidents that were independent of the 60 incidents used for training. The false alarm rates of the model are evaluated based on non-incident data that were collected from a freeway section which was video-taped for a period of 33 days. A comparative evaluation between the neural network model and the incident detection model in operation on Melbourne's freeways is also presented. The results of the comparative performance evaluation clearly demonstrate the substantial improvement in incident detection performance obtained by the neural network model. The paper also presents additional results that demonstrate how improvements in model performance can be achieved using variable decision thresholds. Finally, the model's fault-tolerance under conditions of corrupt or missing data is investigated and the impact of loop detector failure/malfunction on the performance of the trained model is evaluated and discussed. The results presented in this paper provide a comprehensive evaluation of the developed model and confirm that neural network models can provide fast and reliable incident detection on freeways. (C) 1997 Elsevier Science Ltd. All rights reserved.

The response of native Australian rodents to predator odours varies seasonally: a by-product of life history variation?

Small mammals are subject to predation from mammalian, avian and reptilian predators. There is an obvious advantage for prey species to detect the presence of predators in their environment, enabling them to make decisions about movement and foraging behaviour based on perceived risk of predation. We examined the effect of faecal odours from marsupial and eutherian predators, and a native reptilian predator, on the behaviour of three endemic Australian rodent species (the fawn-footed melomys, Melomys cervinipes, the bush rat, Rattus fuscipes, and the giant white-tailed rat, Uromys caudimaculatus) in rainforest remnants on the Atherton Tableland, North Queensland, Australia. Infrared camera traps were used to assess visit rates of rodents to odour stations containing faecal and control odours. Rodents avoided odour stations containing predator faeces, but did not avoid herbivore or control odours. The responses of the three prey species differed: in the late wet season U. caudimaculatus avoided predator odours, whereas R. fuscipes and M. cervinipes did not. In contrast, in the late dry season all three species avoided odour stations containing predator odours. We speculate that these different responses may result from variation in life history traits between the species. (c) 2006 The Association for the Study of Animal Behaviour Published by Elsevier Ltd. All rights reserved.

Improved VDC casting of aluminium alloys through an understanding of the surface properties of the molten metal

Vertical direct chill (VDC) casting of aluminium alloys is a mature process that has evolved over many decades through gradual change to both equipment design and casting practice. Today, air-pressurised, continuous lubrication, hot top mould systems with advanced station automation are selected as the process of choice for producing extrusion billet. Specific sets of operating parameters are employed on these stations for each alloy and size combination to produce optimal billet quality. The designs and parameters are largely derived from past experience and accumulated know-how. Recent experimental work at the University of Queensland has concentrated on understanding the way in which the surface properties of liquid aluminium alloys, e.g., surface tension, wetting angle and oxide skin strength, influence the size and shape of the naturally-stab le meniscus for a given alloy, temperature and atmosphere. The wide range of alloy-and condition-dependent values measured has led to the consideration of how these properties impact the stability of the enforced molten metal meniscus within the hot top mould cavity. The actual shape and position of the enforced meniscus is controlled by parameters such as the upstream conduction distance (UCD) from sub-mould cooling and the molten metal head. The degree of deviation of this actual meniscus from the predicted stable meniscus is considered to be a key driver in surface defect formation. This paper reports on liquid alloy property results and proposes how this knowledge might be used to better design VDC mould systems and casting practices.

Associations involving delays (particularly long delays) between certain weather parameters and geomagnetic activity

Four sunspot-minimum periods (1963-1966, 1971-1977, 1983-1987 and 1992-1997) have been examined for the results which are presented. Using several different weather parameters, tropospheric gravity waves, enhanced cold fronts and two rainfall data sets in Eastern Australia, associations at reasonably high levels of significance have been found with enhanced geomagnetic activity (EGA). Statistically this EGA involved either short delays of several days or long delays of about 20 days. The geomagnetic parameters used were (a) the AE index (b) the hourly H component for a number of stations and (c) the daily K-P-sum value. The K-P-sum analyses have shown that the EGA associated with the delays form part of four or five cycles of recurrent geomagnetic activity for 27-day periodicities. Furthermore statistically two recurrent cycles are found to exist concurrently, one apparently related to the short delays and the other to the long delays. Periodicities of 13.5 days are created because the two sets are displaced from each other by approximately this interval. A brief reference is made to the 13.5 periodicity known to exist for geomagnetic activity and the evidence in the literature for active regions on the sun to be displaced by 180 degrees of solar longitude.

Reproductive dynamics of endeavour prawns, Metapenaeus endeavouri and M-ensis, in Albatross Bay, Gulf of Carpentaria, Australia

The spawning patterns of two penaeid prawns, Metapenaeus endeavouri (Schmitt) and M. ensis (De Haan), were examined from data collected at 45 stations between March 1986 and March 1992. An index of population fecundity based on the abundance, proportion and fecundity of sexually mature females was used as a measure of spawning output of the prawn stock. The population fecundity index for M. ensis was higher than that for M. endeavouri. The monthly population fecundity index for M. endeavouri varied markedly among years, while that for M. ensis was consistent among years. Spawning of M. endeavouri occurred year-round, while that of M. ensis was concentrated mainly in spring (September to November). For M. endeavouri, a minor spawning, derived from a relatively small number of summer spawners, occurred in the 20 to 30 m offshore waters in summer. In early summer (after May), the major spawning group consisted of large females from the winter-spawning cohort, and the spawning area shifted to depths of 30 to 60 m. In winter (July), the major spawning, derived from the winter-spawning cohort, occurred at depths of 20 to 40 m. For M. ensis, the major spawning, derived from the spring-spawning cohort, was observed in depths < 50 m and was concentrated particularly in inshore waters ( 50 m). These results suggest that mature female M. endeavouri and M. ensis move offshore (>40 m) by May and July, respectively, and return to shallow waters (

Parasite infection rather than tactile stimulation is the proximate cause of cleaning behaviour in reef fish

Cleaning behavior is a popular example of non-kin cooperation. However, quantitative support for this is generally sparse and the alternative, that cleaners are parasitic: has also been proposed. Although the behaviour involves some of the most complex and highly developed interspecific communication signals known, the proximate causal factors for why clients Seek cleaners are controversial. However, this information is essential to understanding the evolution of cleaning. I tested whether clients seek cleaners in response to parasite infection or whether clients seek cleaners for tactile stimulation regardless of parasite load. Parasite loads oil client fish were manipulated and clients exposed to cleaner fish and control fish hehind glass. I found that parasitized client fish spent more time than unparasitized fish next to a cleaner fish. In addition; parasitized clients spent more rime next to cleaners than next to control fish whereas unparasitized fish were not attracted to cleaners. This study shows, I believe for the first time, which is somewhat surprising, that parasite infection alone causes clients to seek cleaning by cleaners and provides insight into how this behaviour evolved.

Asymmetric cheating opportunities and partner control in a cleaner fish mutualism

How can cooperation persist if, for one partner, cheating is more profitable than cooperation in each round, while the other partner has no option to cheat? Our laboratory experiments suggest that such a situation exists between the cleaner fish Labroides dimidiatus and its nonpredatory client reef fish species, which actively seek cleaners to have their ectoparasites removed. Clients Ctenochaetus striatus regularly jolted in response to cleaner mouth contact, and these jolts were not linked to the removal of parasites. In addition, cleaners did not search for parasites but fed on mucus when exposed to anaesthetized clients, which could not control the cleaners' behaviour. Field data showed that clients often terminated an interaction immediately after a jolt. Client species with access to only one cleaning station, owing to their small territories or home ranges, terminated interactions mainly by chasing cleaners while clients with access to two or more cleaning stations mainly swam away. Thus, the chasing of cleaners appeared to be a form of punishment, imposing costs on the cleaner at the client's (momentary) expense. Chasing yields future benefits, as jolts were on average less frequent during interactions between cleaners and individuals that had terminated their previous interaction by aggressive chasing. 2002 The Association for the Study of Animal Behaviour.

Parasite distribution on client reef fish determines cleaner fish foraging patterns

Recent evidence suggests that cleaner fish Labroides dimidiatus effectively control parasite densities on client reef fish that actively visit them to have parasites and dead or infected tissue removed. These findings support the hypothesis that clients benefit from cleaning, However, they do not show how cleaners reduce the parasite load of their clients. Cleaners could selectively feed on parasites or parasite removal could be a side product of cleaners foraging indifferently on the client surface, resulting in the removal of healthy mucus and scales also. To investigate cleaner fish foraging behaviour, we infected individuals of the surgeon fish Ctenochaetus striatus, with parasitic monogeneans on one body side, while the other body side was parasite free. We then allowed these clients to interact with L, dimidiatus. We found that the duration of interactions depended on parasite load, and that cleaners spent both more time and took more bites per time unit on the infected than on the uninfected side, Our data thus support the idea that parasite abundance determines food patch quality for cleaners. The overall outcome of cleaning interactions is thus likely to benefit the clients.

Application of spatial analysis techniques to adjust for fertility trends and identify interplot competition in early stage sugarcane selection trials

Most sugarcane breeding programs in Australia use large unreplicated trials to evaluate clones in the early stages of selection. Commercial varieties that are replicated provide a method of local control of soil fertility. Although such methods may be useful in detecting broad trends in the field, variation often occurs on a much smaller scale. Methods such as spatial analysis adjust a plot for variability by using information from immediate neighbours. These techniques are routinely used to analyse cereal data in Australia and have resulted in increased accuracy and precision in the estimates of variety effects. In this paper, spatial analyses in which the variability is decomposed into local, natural, and extraneous components are applied to early selection trials in sugarcane. Interplot competition in cane yield and trend in sugar content were substantial in many of the trials and there were often large differences in the selections between the spatial and current method used by the Bureau of Sugar Experiment Stations. A joint modelling approach for tonnes sugar per hectare in response to fertility trends and interplot competition is recommended.

The surface chemistry of leaching coal fly ash

The utilization of coal fly ash in the construction and non-construction areas has seen a rapid growth in the last decade. As production outweighs the utilization of fly ash, its disposal as a dilute or dense slurry is still practiced in coal fired power stations. In this review the surface chemistry of leaching coal fly ash is presented to highlight the role of mass transfer in providing resistance and consequently delayed leaching of elements, when fly ash is disposed or used for value addition. (C) 2002 Elsevier Science B.V. All rights reserved.

Analysis of the wind field and heat budget in an alpine lake basin during summertime fair weather conditions

Observational data collected in the Lake Tekapo hydro catchment of the Southern Alps in New Zealand are used to analyse the wind and temperature fields in the alpine lake basin during summertime fair weather conditions. Measurements from surface stations, pilot balloon and tethersonde soundings, Doppler sodar and an instrumented light aircraft provide evidence of multi-scale interacting wind systems, ranging from microscale slope winds to mesoscale coast-to-basin flows. Thermal forcing of the winds occurred due to differential heating as a consequence of orography and heterogeneous surface features, which is quantified by heat budget and pressure field analysis. The daytime vertical temperature structure was characterised by distinct layering. Features of particular interest are the formation of thermal internal boundary layers due to the lake-land discontinuity and the development of elevated mixed layers. The latter were generated by advective heating from the basin and valley sidewalls by slope winds and by a superimposed valley wind blowing from the basin over Lake Tekapo and up the tributary Godley Valley. Daytime heating in the basin and its tributary valleys caused the development of a strong horizontal temperature gradient between the basin atmosphere and that over the surrounding landscape, and hence the development of a mesoscale heat low over the basin. After noon, air from outside the basin started flowing over mountain saddles into the basin causing cooling in the lowest layers, whereas at ridge top height the horizontal air temperature gradient between inside and outside the basin continued to increase. In the early evening, a more massive intrusion of cold air caused rapid cooling and a transition to a rather uniform slightly stable stratification up to about 2000 m agl. The onset time of this rapid cooling varied about 1-2 h between observation sites and was probably triggered by the decay of up-slope winds inside the basin, which previously countered the intrusion of air over the surrounding ridges. The intrusion of air from outside the basin continued until about mid-night, when a northerly mountain wind from the Godley Valley became dominant. The results illustrate the extreme complexity that can be caused by the operation of thermal forcing processes at a wide range of spatial scales.