Service performance of engineering materials

Corrosion research by Atrens and co-workers has made significant contributions to the understanding of the service performance of engineering materials. This includes: (1) elucidated corrosion mechanisms of Mg alloys, stainless steels and Cu alloys, (2) developed an improved understanding of passivity in stainless steels and binary alloys such as Fe-Cr, Ni-Cr, Co-Cr, Fe-Ti, and Fe-Si, (3) developed an improved understanding of the melt spinning of Cu alloys, and (4) elucidated mechanisms of environment assisted fracture (EAF) of steels and Zr alloys. This paper summarises contributions in the following: (1) intergranular stress corrosion cracking of pipeline steels, (2) atmospheric corrosion and patination of Cu, (3) corrosion of Mg alloys, and (4) transgranular stress corrosion cracking of rock bolts.

Heterogeneous nucleation of Mg-Al alloys

Grain size is one of the most important microstructural characteristics determining the mechanical properties and therefore the service performance of polycrystalline materials. Heterogeneous nucleation involves the addition or in situ formation of potent nuclei in the system to promote nucleation events, leading to a fine grain structure. This paper reports experimental results using graphite and SiC as potential grain refining agents to form in situ nuclei for Mg in Mg-Al alloys, and demonstrates the key role of Al4C3 in grain refilling this important alloy system. This insight will contribute to the design and development of the most cost effective, eco-friendly grain refining agents for Mg-Al alloys. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Understanding magnesium corrosion - A framework for improved alloy performance

The purpose of this paper is to provide a succinct but nevertheless complete mechanistic overview of the various types of magnesium corrosion. The understanding of the corrosion processes of magnesium alloys builds upon our understanding of the corrosion of pure magnesium. This provides an understanding of the types of corrosion exhibited by,magnesium alloys, and also of the environmental factors Of most importance. This deep understanding is required as a foundation if we are to produce magnesium alloys much more resistant to corrosion than the present alloys. Much has already been achieved, but there is vast scope for improvement. This present analysis can provide a foundation and a theoretical framework for further, much needed research. There is still vast scope both for better fundamental understanding of corrosion processes, engineering usage of magnesium, and also on the corrosion protection of magnesium alloys in service.

Performance of improved guayule lines in Australia

Guayule (Parthenium argentatum Gray) is a potential source of commercial natural rubber. Its commercialisation depends mainly on economical plant production. The objective of this study was to evaluate the performance of improved lines in Australia. Seeds from five improved lines (AZ-1, AZ-2, AZ-3, AZ-5 and AZ-6) and two previously developed guayule lines (N 565 and 11591) were obtained from the Agricultural Research Service (ARS) of the United States Department of Agriculture (USDA). Seedlings from these lines were grown in a glasshouse for 3 months and later transplanted in a field experiment in early September 2001. Plant height and width were monitored from transplanting to 62 weeks at regular intervals. After 62 weeks, plant dry matter production, rubber and resin content, and yields were analysed. Plant height and width of the improved lines were higher than N 565 and 11591. Plant dry matter, rubber and resin yields were significantly different among lines. Of the five lines, AZ-1 and AZ-2 produced rubber yields of 620 and 550 kg/ha, respectively and these yields were significantly greater than for N 565 (371 kg/ha) and 11591 (391 kg/ha). AZ-1 and AZ-2 also produced significantly higher resin yields, 727 and 668 kg/ha, respectively, than those for N 565 (436 kg/ha) and 11591 (325 kg/ha). Rubber and resin yield increase of lines, AZ-1 and AZ-2, were in the range of 41-68% and 53-123%, respectively over N 565 and 11591. AZ-1 tended to produce higher rubber and resin yields than AZ-2 but exhibited highly variable plant height (CV = 25%) and width (CV = 41%) indicating potential for further genetic improvement. AZ-2 offers the best combination of desirable characters including early vigour, uniformity and comparatively higher rubber and resin yields. (C) 2003 Published by Elsevier B.V.

Financial and economic performance of long-rotation hardwood plantation investments in Queensland, Australia

In Queensland, Australia, there is presently a high level of interest in long-rotation hardwood plantation investments for sawlog production, despite the consensus in Australian literature that such investments are not financially viable. Continuing genetics, silviculture and processing research, and increasing awareness about the ecosystem services generated by plantations, are anticipated to make future plantings profitable and socio-economically desirable in many parts of Queensland. Financial and economic models of hardwood plantations in Queensland are developed to test this hypothesis. The economic model accounts for carbon sequestration, salinity amelioration and other ecosystem service values of hardwood plantations. A carbon model estimates the value of carbon sequestered, while salinity and other ecosystem service values are estimated by the benefit transfer method. Where high growth rates (20-25 m(3) ha(-1) year(-1)) are achievable, long-rotation hardwood plantations are profitable in Queensland Hardwood Regions 1, 3 and 7 when rural land values are less than $2300/ha. Under optimistic assumptions, hardwood plantations growing at a rate of 15 in 3 ha-1 year 1 are financially viable in Hardwood Regions 2, 4 and 8, provided land values are less than $1600/ha. The major implication of the economic analysis is that long-rotation hardwood plantation forestry is socio-economically justified in most Hardwood Regions, even though financial returns from timber production may be negative. (c) 2003 Elsevier B.V. All rights reserved.

Understanding service experience in non-profit performing arts: Implications for operations and service management

Recent research in the non-profit performing arts has shown that marketing efforts designed to increase revenue from ticket sales are not achieving the results required to sustain the performing arts. This paper applies operations management analytical techniques to the non-profit performing arts to increase understanding of operational issues and inform service management strategy. The paper takes a two-study idiographic approach. Implementing a modified version of service transaction analysis (STA), Study One describes a performing arts service from provider and customer perspectives, identifies service gaps and develops an elaborated service description incorporating both perspectives. In Study Two, building on the elaborated service description and extant research, in-depth interviews are conducted to gather thick descriptions of predictors of satisfaction, value and service quality as they relate to repurchase intention (RI). Technical, functional and critical factors required to improve organizational performance are identified. Implications for operational strategy, service design and service management theory for this context are discussed. (c) 2005 Published by Elsevier B.V.

Benchmarking of performance of Mexican states with effective coverage

Benchmarking of the performance of states, provinces, or districts in a decentralised health system is important for fostering of accountability, monitoring of progress, identification of determinants of success and failure, and creation of a culture of evidence. The Mexican Ministry of Health has, since 2001, used a benchmarking approach based on the World Health Organization (WHO) concept of effective coverage of an intervention, which is defined as the proportion of potential health gain that could be delivered by the health system to that which is actually delivered. Using data collection systems, including state representative examination surveys, vital registration, and hospital discharge registries, we have monitored the delivery of 14 interventions for 2005-06. Overall effective coverage ranges from 54.0% in Chiapas, a poor state, to 65.1% in the Federal District. Effective coverage for maternal and child health interventions is substantially higher than that for interventions that target other health problems. Effective coverage for the lowest wealth quintile is 52% compared with 61% for the highest quintile. Effective coverage is closely related to public-health spending per head across states; this relation is stronger for interventions that are not related to maternal and child health than those for maternal and child health. Considerable variation also exists in effective coverage at similar amounts of spending. We discuss the implications of these issues for the further development of the Mexican health-information system. Benchmarking of performance by measuring effective coverage encourages decision-makers to focus on quality service provision, not only service availability. The effective coverage calculation is an important device for health-system stewardship. In adopting this approach, other countries should select interventions to be measured on the basis of the criteria of affordability, effect on population health, effect on health inequalities, and capacity to measure the effects of the intervention. The national institutions undertaking this benchmarking must have the mandate, skills, resources, and independence to succeed.

Performance of some unbound roadbase materials from Queensland = Performance de certains matériaux granulaires de base du Queensland

This paper summarises recent investigations into characterisation and performance of unbound roadbase materials carried out by Main Roads, Queensland (QDMR), on road projects across the state. Performance based tests such as the Repeated Load Triaxial (RLT) and the Wheel Tracker (WT) are the primary tools which are increasingly used by QDMR to overcome the limitations of simple specification type tests. This paper shows the inadequacy of current specification tests to rank material performance. The performance based tests show that the properties of the coarse aggregate alone are inadequate for sound performance; enable the contribution to mechanical behaviour by plastic fines with high matric suction to be assessed,- further, and facilitates ranking of material behaviour. Simple shakedown analyses undertaken yield similar material rankings. Finally, some materials from the performance based characterisation are compared with Falling Weight Deflectometer (FWD) in-service pavement performance data.

Performance analysis of multi-radio AODV in hybrid wireless mesh networks

Wireless Mesh Networks (WMNs), based on commodity hardware, present a promising technology for a wide range of applications due to their self-configuring and self-healing capabilities, as well as their low equipment and deployment costs. One of the key challenges that WMN technology faces is the limited capacity and scalability due to co-channel interference, which is typical for multi-hop wireless networks. A simple and relatively low-cost approach to address this problem is the use of multiple wireless network interfaces (radios) per node. Operating the radios on distinct orthogonal channels permits effective use of the frequency spectrum, thereby, reducing interference and contention. In this paper, we evaluate the performance of the multi-radio Ad-hoc On-demand Distance Vector (AODV) routing protocol with a specific focus on hybrid WMNs. Our simulation results show that under high mobility and traffic load conditions, multi-radio AODV offers superior performance as compared to its single-radio counterpart. We believe that multi-radio AODV is a promising candidate for WMNs, which need to service a large number of mobile clients with low latency and high bandwidth requirements.