Nanostructures, Semicrytalline Morphology, and Nanoscale Confinement Effect on the Crystallization Kinetics in Self-Organized Block Copolymer/Thermoset Blends

This work reports the first instance of self-organized thermoset blends containing diblock copolymers with a crystallizable thermoset-immiscible block. Nanostructured thermoset blends of bisphenol A-type epoxy resin (ER) and a low-molecular-weight (M-n = 1400) amphiphilic polyethylene-block-poly(ethylene oxide) (EEO) symmetric diblock copolymer were prepared using 4,4'-methylenedianiline (MDA) as curing agent and were characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), small-angle X-ray scattering (SAXS), and differential scanning calorimetry (DSC). All the MDA-cured ER/EEO blends do not show macroscopic phase separation but exhibit microstructures. The ER selectively mixes with the epoxy-miscible PEO block in the EEO diblock copolymer whereas the crystallizable PE blocks that are immiscible with ER form separate microdomains at nanoscales in the blends. The PE crystals with size on nanoscales are formed and restricted within the individual spherical micelles in the nanostructured ER/EEO blends with EEO content up to 30 wt %. The spherical micelles are highly aggregated in the blends containing 40 and 50 wt % EEO. The PE dentritic crystallites exist in the blend containing 50 wt % EEO whereas the blends with even higher EEO content are completely volume-filled with PE spherulites. The semicrystalline microphase-separated lamellae in the symmetric EEO diblock copolymer are swollen in the blend with decreasing EEO content, followed by a structural transition to aggregated spherical micellar phase morphology and, eventually, spherical micellar phase morphology at the lowest EEO contents. Three morphological regimes are identified, corresponding precisely to the three regimes of crystallization kinetics of the PE blocks. The nanoscale confinement effect on the crystallization kinetics in nanostructured thermoset blends is revealed for the first time. This new phenomenon is explained on the basis of homogeneous nucleation controlled crystallization within nanoscale confined environments in the block copolymer/thermoset blends.

The development of self-awareness and relationship to emotional functioning during early community reintegration after traumatic brain injury

Impaired self-awareness may affect clients' emotional status, engagement in rehabilitation and community reintegration following traumatic brain injury (TBI). The study aimed to investigate the relationship between self-awareness, emotional distress and community integration in adults with TBI during the transition from hospital to the community. Thirty-four rehabilitation clients with TBI were assessed in the week before and 2 months after discharge home. Measures of self-awareness and emotional functioning were administered predischarge and repeated at follow-up along with a measure of community integration. Nonparametric tests were used to compare levels of self-awareness and emotional distress pre- and postdischarge, their interrelationships and association with community integration. Self-awareness significantly increased following discharge, and a trend towards increased depression was found. There were no consistent relationships found between level of self-awareness, emotional functioning, and community integration. The development of self-awareness in the immediate postdischarge phase suggests this is an important time for clinical interventions targeting compensation strategies and adjustment to disability.

Pattern and correlates of inpatient admission during the initial acute phase of first-episode psychosis

Objectives: The first aim of this study was to examine the rate, pattern and correlates of inpatient admission during the first 3 months of treatment for first-episode psychosis (FEP). The second aim was to determine whether the pattern of inpatient admission during this period was associated with remission of psychotic symptoms or inpatient service use at 15-month follow-up. Method: One hundred and four consecutive patients with FEP at a specialist treatment service were approached to participate in a follow-up study. Patients were grouped on the basis of the pattern of inpatient admission (none, one, or multiple) during the first 3 months of treatment. Clinical ratings at baseline and 3-month follow-up, and ratings of remission of psychotic symptoms at 3 and 15-month follow-up, were available for two-thirds of the patients. Inpatient data for the 15-month follow-up period were derived from an electronic database for most patients (n = 98). Results: Eighty (76.9%) of the 104 patients were admitted to an inpatient unit during the first 3 months of treatment. Fifty-nine (56.7%) patients had a single admission and 21 (20.2%) had multiple admissions. At baseline, inpatient admission was associated with a diagnosis of affective psychosis and more severe behavioural and functional disturbance but not positive psychotic symptoms. Multiple admissions were associated with risks to self or others at baseline and 3-month follow-up, and lack of remission of positive symptoms at 3 and 15-month follow-up. There was no association between the pattern of inpatient admission during the initial 3-month period and inpatient service use during the following 12-month period. Conclusions: The substantial proportion of young patients with FEP admitted to hospital emphasizes the need for youth-friendly treatment environments and practices. Although patients with multiple admissions during the initial treatment period are less likely to achieve remission, these patients are no more likely to establish a pattern of revolving-door hospitalizations compared with other patients.

Mechanical properties of interfacial films formed by lysozyme self-assembly at the air-water interface

We present the first characterization of the mechanical properties of lysozyme films formed by self-assembly at the air-water interface using the Cambridge interfacial tensiometer (CIT), an apparatus capable of subjecting protein films to a much higher level of extensional strain than traditional dilatational techniques. CIT analysis, which is insensitive to surface pressure, provides a direct measure of the extensional stress-strain behavior of an interfacial film without the need to assume a mechanical model (e.g., viscoelastic), and without requiring difficult-to-test assumptions regarding low-strain material linearity. This testing method has revealed that the bulk solution pH from which assembly of an interfacial lysozyme film occurs influences the mechanical properties of the film more significantly than is suggested by the observed differences in elastic moduli or surface pressure. We have also identified a previously undescribed pH dependency in the effect of solution ionic strength on the mechanical strength of the lysozyme films formed at the air-water interface. Increasing solution ionic strength was found to increase lysozyme film strength when assembly occurred at pH 7, but it caused a decrease in film strength at pH 11, close to the pI of lysozyme. This result is discussed in terms of the significant contribution made to protein film strength by both electrostatic interactions and the hydrophobic effect. Washout experiments to remove protein from the bulk phase have shown that a small percentage of the interfacially adsorbed lysozyme molecules are reversibly adsorbed. Finally, the washout tests have probed the role played by additional adsorption to the fresh interface formed by the application of a large strain to the lysozyme film and have suggested the movement of reversibly bound lysozyme molecules from a subinterfacial layer to the interface.

Distance measurement using the change in junction voltage across a laser diode due to the self-mixing effect

Conventional detection scheme for self-mixing sensors uses an integrated photodiode within the laser package to monitor the self mixing signal. This arrangement can be simplified by directly obtaining the self-mixing signals across the laser diode itself and omitting the photodiode. This work reports on a Vertical-Cavity Surface-Emitting Laser (VCSEL) based selfmixing sensor using the laser junction voltage to obtain the selfmixing signal. We show that the same information can be obtained with only minor changes to the extraction circuitry leading to potential cost saving with reductions in component costs and complexity and significant increase in bandwidth favoring high speed modulation. Experiments using both photo current and voltage detection were carried out and the results obtained show good agreement with the theory.

Self-reported risk perception, mood and risk behaviour across the human menstrual cycle

Normally ovulating women exhibit a decline in risk behaviours that may lead to sexual assault during the fertile phase of the menstrual cycle, whereas women using the Pill do not. The current study tests two explanatory models: the mood and fertility models. Self-reported risk and non-risk behaviours, mood, and risk perception in sexual assault and physical risk domains were assessed by testing fiftyone women at menstruation and during their fertile period. Based on the decline in risk behaviours shown in past research, the fertility model predicts that normally ovulating women will display greater risk perception during the fertile phase of their cycle. The mood model predicts that at menstruation, when negative mood is highest, risk perception will be increased and risk behaviours correspondingly reduced. Risk behaviours did not vary over the cycle or between groups. Overall, results support the mood model. Negative mood was greater at menstruation and positive mood during the fertile period for both groups, rational risk perception was correspondingly greater at menstruation. The fertility model was not supported as risk perception ratings did not vary in the expected direction and ratings were not specific to the sexual assault domain.