Partial completion of activity in business process specification

We examine the current workflow modelling capability from a new angle and demonstrate a weakness of current workflow specification languages in relation to execution of activities. This shortcoming is mainly due to serious limitations of the corresponding computational/execution model behind the business process modelling language constructs. The main purpose of this paper is the introduction of new specification/modelling constructs allowing for more precise representation of complex activity states during its execution. This new concept enables visibility of a new activity state–partial completion of activity, which in turn allows for a more flexible and precise enforcement/monitoring of automated business processes.

Specification and Evaluation of Safety Properties in a Component-Based Software Engineering Process

Over the past years, component-based software engineering has become an established paradigm in the area of complex software intensive systems. However, many techniques for analyzing these systems for critical properties currently do not make use of the component orientation. In particular, safety analysis of component-based systems is an open field of research. In this chapter we investigate the problems arising and define a set of requirements that apply when adapting the analysis of safety properties to a component-based software engineering process. Based on these requirements some important component-oriented safety evaluation approaches are examined and compared.

Specification and validation of process constraints for flexible workflows

Workflow systems have traditionally focused on the so-called production processes which are characterized by pre-definition, high volume, and repetitiveness. Recently, the deployment of workflow systems in non-traditional domains such as collaborative applications, e-learning and cross-organizational process integration, have put forth new requirements for flexible and dynamic specification. However, this flexibility cannot be offered at the expense of control, a critical requirement of business processes. In this paper, we will present a foundation set of constraints for flexible workflow specification. These constraints are intended to provide an appropriate balance between flexibility and control. The constraint specification framework is based on the concept of pockets of flexibility which allows ad hoc changes and/or building of workflows for highly flexible processes. Basically, our approach is to provide the ability to execute on the basis of a partially specified model, where the full specification of the model is made at runtime, and may be unique to each instance. The verification of dynamically built models is essential. Where as ensuring that the model conforms to specified constraints does not pose great difficulty, ensuring that the constraint set itself does not carry conflicts and redundancy is an interesting and challenging problem. In this paper, we will provide a discussion on both the static and dynamic verification aspects. We will also briefly present Chameleon, a prototype workflow engine that implements these concepts. (c) 2004 Elsevier Ltd. All rights reserved.

Supporting the software testing process through specification animation

Achieving consistency between a specification and its implementation is an important part of software development. In this paper, we present a method for generating passive test oracles that act as self-checking implementations. The implementation is verified using an animation tool to check that the behavior of the implementation matches the behavior of the specification. We discuss how to integrate this method into a framework developed for systematically animating specifications, which means a tester can significantly reduce testing time and effort by reusing work products from the animation. One such work product is a testgraph: a directed graph that partially models the states and transitions of the specification. Testgraphs are used to generate sequences for animation, and during testing, to execute these same sequences on the implementation.

A framework for specification-based testing

Test templates and a test template framework are introduced as useful concepts in specification-based testing. The framework can be defined using any model-based specification notation and used to derive tests from model-based specifications-in this paper, it is demonstrated using the Z notation. The framework formally defines test data sets and their relation to the operations in a specification and to other test data sets, providing structure to the testing process. Flexibility is preserved, so that many testing strategies can be used. Important application areas of the framework are discussed, including refinement of test data, regression testing, and test oracles.

Specification, refinement and verification of concurrent systems - An integration of Object-Z and CSP

This paper presents a method of formally specifying, refining and verifying concurrent systems which uses the object-oriented state-based specification language Object-Z together with the process algebra CSP. Object-Z provides a convenient way of modelling complex data structures needed to define the component processes of such systems, and CSP enables the concise specification of process interactions. The basis of the integration is a semantics of Object-Z classes identical to that of CSP processes. This allows classes specified in Object-Z to he used directly within the CSP part of the specification. In addition to specification, we also discuss refinement and verification in this model. The common semantic basis enables a unified method of refinement to be used, based upon CSP refinement. To enable state-based techniques to be used fur the Object-Z components of a specification we develop state-based refinement relations which are sound and complete with respect to CSP refinement. In addition, a verification method for static and dynamic properties is presented. The method allows us to verify properties of the CSP system specification in terms of its component Object-Z classes by using the laws of the the CSP operators together with the logic for Object-Z.

Model specification tests in nonparametric stochastic regression models

In this paper, we consider testing for additivity in a class of nonparametric stochastic regression models. Two test statistics are constructed and their asymptotic distributions are established. We also conduct a small sample study for one of the test statistics through a simulated example. (C) 2002 Elsevier Science (USA).

Rice morphogenesis and plant architecture: Measurement, specification and the reconstruction of structural development by 3D architectural modelling

Background and Aims The morphogenesis and architecture of a rice plant, Oryza sativa, are critical factors in the yield equation, but they are not well studied because of the lack of appropriate tools for 3D measurement. The architecture of rice plants is characterized by a large number of tillers and leaves. The aims of this study were to specify rice plant architecture and to find appropriate functions to represent the 3D growth across all growth stages. Methods A japonica type rice, 'Namaga', was grown in pots under outdoor conditions. A 3D digitizer was used to measure the rice plant structure at intervals from the young seedling stage to maturity. The L-system formalism was applied to create '3D virtual rice' plants, incorporating models of phenological development and leaf emergence period as a function of temperature and photoperiod, which were used to determine the timing of tiller emergence. Key Results The relationships between the nodal positions and leaf lengths, leaf angles and tiller angles were analysed and used to determine growth functions for the models. The '3D virtual rice' reproduces the structural development of isolated plants and provides a good estimation of the fillering process, and of the accumulation of leaves. Conclusions The results indicated that the '3D virtual rice' has a possibility to demonstrate the differences in the structure and development between cultivars and under different environmental conditions. Future work, necessary to reflect both cultivar and environmental effects on the model performance, and to link with physiological models, is proposed in the discussion.

Development of the Minimum Information Specification for in situ Hybridization and Immunohistochemistry Experiments (MISFISHIE)

We describe the creation process of the Minimum Information Specification for In Situ Hybridization and Immunohistochemistry Experiments (MISFISHIE). Modeled after the existing minimum information specification for microarray data, we created a new specification for gene expression localization experiments, initially to facilitate data sharing within a consortium. After successful use within the consortium, the specification was circulated to members of the wider biomedical research community for comment and refinement. After a period of acquiring many new suggested requirements, it was necessary to enter a final phase of excluding those requirements that were deemed inappropriate as a minimum requirement for all experiments. The full specification will soon be published as a version 1.0 proposal to the community, upon which a more full discussion must take place so that the final specification may be achieved with the involvement of the whole community. This paper is part of the special issue of OMICS on data standards.

Product performance and specification in new product development

This paper deals with product performance and specification in new product development. There are many different definitions of performance and specification in the literature. These are reviewed and a new classification scheme for product performance is proposed. The link between performance and specification is discussed in detail using a new model for the new product development process. The new model involves two stages, with each containing three main phases, and is useful for making decisions with regards to product performance and specification.

Quality of service in flexible workflows through process constraints

Workflow technology has delivered effectively for a large class of business processes, providing the requisite control and monitoring functions. At the same time, this technology has been the target of much criticism due to its limited ability to cope with dynamically changing business conditions which require business processes to be adapted frequently, and/or its limited ability to model business processes which cannot be entirely predefined. Requirements indicate the need for generic solutions where a balance between process control and flexibility may be achieved. In this paper we present a framework that allows the workflow to execute on the basis of a partially specified model where the full specification of the model is made at runtime, and may be unique to each instance. This framework is based on the notion of process constraints. Where as process constraints may be specified for any aspect of the workflow, such as structural, temporal, etc. our focus in this paper is on a constraint which allows dynamic selection of activities for inclusion in a given instance. We call these cardinality constraints, and this paper will discuss their specification and validation requirements.

It's all in the game: Teaching software process concepts

A major challenge in teaching software engineering to undergraduates is that most students have limited industry experience, so the problems addressed are unknown and hence unappreciated. Issues of scope prevent a realistic software engineering experience, and students often graduate with a simplistic view of software engineering’s challenges. Problems and Programmers (PnP) is a competitive, physical card game that simulates the software engineering process from requirements specification to product delivery. Deliverables are abstracted, allowing a focus on process issues and for lessons to be learned in a relatively short time. The rules are easy to understand and the game’s physical nature allows for face-to-face interaction between players. The game’s developers have described PnP in previous publications, but this paper reports the game’s use within a larger educational scheme. Students learn and play PnP, and then are required to create a software requirements specification based on the game. Finally, students reflect on the game’s strengths and weaknesses and their experiences in an individual essay. The paper discusses this approach, students’ experiences and overall outcomes, and offers an independent, critical look at the game, its use, and potential improvements.

Pockets of flexibility in workflow specification

Workflow technology is currently being deployed in quite diverse domains. However, the element of change is present in some degree and form in almost all domains. A workflow implementation that does not support the process of change will not benefit the organization in the long run. Change can be manifested in different forms in workflow processes. In this paper, we first present a categorization of workflow change characteristics and divide workflow processes into dynamic, adaptive and flexible processes. We define flexibility as the ability of the workflow process to execute on the basis of a loosely, or partially specified model, where the full specification of the model is made at runtime, and may be unique to each instance. To provide a modeling framework that offers true flexibility, we need to consider the factors, which influence the paths of (unique) instances together with the process definition. We advocate an approach that aims at making the process of change part of the workflow process itself. We introduce the notion of an open instance that consists of a core process and several pockets of flexibility, and present a framework based on this notion, which makes use of special build activities that provide the functionality to integrate the process of defining a change, into the open workflow instance.

Abstract specification in Object-Z and CSP

A number of integrations of the state-based specification language Object-Z and the process algebra CSP have been proposed in recent years. In developing such integrations, a number of semantic decisions have to be made. In particular, what happens when an operation's precondition is not satisfied? Is the operation blocked, i.e., prevented from occurring, or can it occur with an undefined result? Also, are outputs from operations angelic, satisfying the environment's constraints on them, or are they demonic and not influenced by the environment at all? In this paper we discuss the differences between the models, and show that by adopting a blocking model of preconditions together with an angelic model of outputs one can specify systems at higher levels of abstraction.

Major Issues in Business Process Management: An Expert Perspective

The results presented in this report form a part of a larger global study on the major issues in BPM. Only one part of the larger study is reported here, viz. interviews with BPM experts. Interviews of BPM tool vendors together with focus groups involving user organizations, are continuing in parallel and will set the groundwork for the identification of BPM issues on a global scale via a survey (including a Delphi study). Through this multi-method approach, we identify four distinct sets of outcomes. First, as is the focus of this report, we identify the BPM issues as perceived by BPM experts. Second, the research design allows us to gain insight into the opinions of organisations deploying BPM solutions. Third, an understanding of organizations’ misconceptions of BPM technologies, as confronted by BPM tool vendors is obtained. Last, we seek to gain an understanding of BPM issues on a global scale, together with knowledge of matters of concern. This final outcome is aimed to produce an industry driven research agenda which will inform practitioners and in particular, the research community world-wide on issues and challenges that are prevalent or emerging in BPM and related areas.