Model-based procedure for scale-up of wet, overflow ball mills - Part III: Validation and discussion

A new ball mill scale-up procedure is developed. This procedure has been validated using seven sets of Ml-scale ball mil data. The largest ball mills in these data have diameters (inside liners) of 6.58m. The procedure can predict the 80% passing size of the circuit product to within +/-6% of the measured value, with a precision of +/-11% (one standard deviation); the re-circulating load to within +/-33% of the mass-balanced value (this error margin is within the uncertainty associated with the determination of the re-circulating load); and the mill power to within +/-5% of the measured value. This procedure is applicable for the design of ball mills which are preceded by autogenous (AG) mills, semi-autogenous (SAG) mills, crushers and flotation circuits. The new procedure is more precise and more accurate than Bond's method for ball mill scale-up. This procedure contains no efficiency correction which relates to the mill diameter. This suggests that, within the range of mill diameter studied, milling efficiency does not vary with mill diameter. This is in contrast with Bond's equation-Bond claimed that milling efficiency increases with mill diameter. (C) 2001 Elsevier Science Ltd. All rights reserved.

The specification of vector autoregressive moving average models

In this paper we propose a new identification method based on the residual white noise autoregressive criterion (Pukkila et al. , 1990) to select the order of VARMA structures. Results from extensive simulation experiments based on different model structures with varying number of observations and number of component series are used to demonstrate the performance of this new procedure. We also use economic and business data to compare the model structures selected by this order selection method with those identified in other published studies.

Emotional cue exposure for alcohol abuse: Development of a new treatment procedure to train moderation drinking in the context of dysphoria

Negative mood states are credited to exacerbate excessive drinking among problem drinkers. We developed an emotional cue exposure treatment procedure and applied it to three problem drinkers who have a history of drinking excessively under stressful emotional states. All three preferred a controlled drinking goal and received an average of seven sessions of treatment. Treatment comprised of providing alcohol (priming doses), followed by negative mood induction and response prevention of further drinking. Reductions were observed in the quantity and frequency of drinking, the Beck Depression Inventory, the Severity of Alcohol Dependence Questionnaire (Form C) and the Impaired Control Questionnaire scores. Increments were observed in self-efficacy to face different difficult situations. These gains were maintained at the 6-month follow-up. Providing alcohol to problem drinkers in treatment, followed by negative mood induction and response prevention, is clinically feasible and may benefit clients who drink under a variety of stressful mood states. Copyright (C) 2001 John Wiley & Sons, Ltd.

A new synthesis of chiral aminoalkyloxazolecarboxylate esters from isoxazol-5(2H)-ones: the synthesis of almazoles A and B

2-(1-Aminoalkyl)oxazole-4 and 5-carboxylates are available, without detectable racemisation, by a sequence involving N-acylation of isoxazol-5(2H)one carboxylates with phthalimidoamino acids, photolysis of the acylated product, and hydrazinolysis. An application of the procedure to the synthesis of almazole A and B is described (C) 1998 Elsevier Science Ltd. All rights reserved.

Nuapapuin A and sigmosceptrellins D and E: New norterpene cyclic peroxides from a southern Australian marine sponge, Sigmosceptrella sp.

A Sigmosceptrella sp. from the Great Australian Eight, Australia, has yielded the new norditerpene cyclic peroxide, nuapapuin A (2a), and the norsesterterpene cyclic peroxide sigmosceptrellin D (3a), characterized as the corresponding methyl esters 2b and 3b. The crude methylated sponge extract also yielded the new norsesterterpene cyclic peroxide sigmosceptrellin E methyl ester (4). Relative stereochemistry about C2, C3, and C6 was assigned by established empirical rules and absolute stereochemistry by the advanced Mosher procedure. A plausible biosynthetic pathway has been proposed that rationalizes key transformations in the biosynthesis of all known norterpene cyclic peroxides and related norterpene ketones, dienes and sigmosceptrins.

Hysterectomy fractions in New South Wales, 1971-2006

Hysterectomy fractions by age group for particular periods are of interest for: estimating proper population denominators for calculation of disease and procedure rates affecting the cervix and uterus; estimating the target population for Pap test programs, and response rates; and as a way of displaying the cumulative consequences of hysterectomies in a population. Hysterectomy fractions for populations can be determined by direct inquiry via a representative sample survey, or, as in this study, from prior hysterectomy rates of the cohorts of women which compose each age bracket. Hysterectomy data 1979-93 were obtained from the hospital In-patients Statistics Collection (ISC) which covers both public and private hospitals in NSW. Annual population denominators of women were obtained from Census data. Data were modelled by Poisson regression, using five.-year age group (15-greater than or equal to 85 years), annual period, and five-year birth cohort (APC model). Forward- and back-projection of the period effects were undertaken. The resultant NSW hysterectomy fractions by age and period are consistent with fractions obtained from modelled hysterectomy rates for Western Australia (1980-84), and fractions from national representative sample surveys (1989/90 and 1995) for younger women, but not for women aged greater than or equal to 70 years in 1995, which revealed higher hysterectomy fractions than modelled hysterectomy data would suggest. Hysterectomy fractions for NSW women by five-year age group for quinquennia centred on 1971 to 2006 are provided.

Cancer knowledge and skills of interns in Australia and New Zealand in 2001: comparison with 1990, and between course types

Objective: To compare the cancer knowledge and skills of interns in 2001 who graduated from graduate medical program (GMP) courses with those from non-GMP courses, and to compare the cancer knowledge and skills of interns in 2001 with those who completed a similar survey in 1990. Design: Questionnaire survey of recently graduated interns in a random sample of Australian and New Zealand hospitals. The questionnaire was designed to allow direct comparison with the 1990 survey, and was guided by the Australian Cancer Society's Ideal Oncology Curriculum for Medical Schools. Results: 443 interns completed the survey (response rate, 62%; 42 were excluded, leaving 401 surveys for analysis: 118 from GMP courses and 283 from non-GMP courses). Interns from GMP courses felt more competent than those from non-GMP courses at discussing death (P= 0.02), breaking bad news (P= 0.04) and advising on smoking cessation (P= 0.02), but less competent at preparing a patient for a hazardous procedure (P= 0.02). Mote GMP interns would refer a breast cancer patient to a multidisciplinary clinic (83% versus 70%; P= 0.03). Knowledge about cancer risks and prognosis was significantly less in GMP interns, but GMP interns rated their clinical skills, such as taking a Pap smear, higher than non-GMP interns. The GMP and non-GMP groups did not differ in their exposure to cancer patients, but compared with 1990 interns recent graduates had less exposure to patients with cancer. Conclusions: GMP curricula appear to have successfully introduced new course material and new methods of teaching, but have not always succeeded in producing doctors with better knowledge about cancer. Recent graduates have less exposure to cancer patients than those who trained 10 years ago.

Thermogravimetric analytical procedures for determining reactivities of chars from New Zealand coals

Tightly constrained thermogravimetric experimental procedures (particle size < 212 mu m, sample mass 15.5 mg, CO2 reactant gas, near isothermal conditions) allow the reactivity of chars from high volatile New Zealand coals to be determined to a repeatability of +/-0.07 h(-1) at 900 degrees C and +/-0.5 h(-1) at 1100 degrees C. The procedure also provides proximate analyses information and affords a quick (< 90 min) comparison between different coal types as well as indicating likely operating conditions and problems associated with a particular coal or blend. A clear difference is evident between reactivities of differing New Zealand coal ranks. Between 900 and 1100 degrees C, bituminous coals increase thirtyfold in reactivity compared with fourfold for subbituminous, with the latter being three to five times greater in reactivity at higher temperature. (C) 1997 Elsevier Science B.V.

Model based procedure for scale-up of wet overflow ball mills Part 1: Outline of the methodology

Bond's method for ball mill scale-up only gives the mill power draw for a given duty. This method is incompatible with computer modelling and simulation techniques. It might not be applicable for the design of fine grinding ball mills and ball mills preceded by autogenous and semi-autogenous grinding mills. Model-based ball mill scale-up methods have not been validated using a wide range of full-scale circuit data. Their accuracy is therefore questionable. Some of these methods also need expensive pilot testing. A new ball mill scale-up procedure is developed which does not have these limitations. This procedure uses data from two laboratory tests to determine the parameters of a ball mill model. A set of scale-up criteria then scales-up these parameters. The procedure uses the scaled-up parameters to simulate the steady state performance of full-scale mill circuits. At the end of the simulation, the scale-up procedure gives the size distribution, the volumetric flowrate and the mass flowrate of all the streams in the circuit, and the mill power draw.

Model-based procedure for scale-up of wet, overflow ball mills - Part II: Worked example

A new ball mill scale-up procedure is developed which uses laboratory data to predict the performance of MI-scale ball mill circuits. This procedure contains two laboratory tests. These laboratory tests give the data for the determination of the parameters of a ball mill model. A set of scale-up criteria then scales-up these parameters. The procedure uses the scaled-up parameters to simulate the steady state performance of the full-scale mill circuit. At the end of the simulation, the scale-up procedure gives the size distribution, the volumetric flowrate and the mass flowrate of all the streams in the circuit, and the mill power draw. A worked example shows how the new ball mill scale-up procedure is executed. This worked example uses laboratory data to predict the performance of a full-scale re-grind mill circuit. This circuit consists of a ball mill in closed circuit with hydrocyclones. The MI-scale ball mill has a diameter (inside liners) of 1.85m. The scale-up procedure shows that the full-scale circuit produces a product (hydrocyclone overflow) that has an 80% passing size of 80 mum. The circuit has a recirculating load of 173%. The calculated power draw of the full-scale mill is 92kW (C) 2001 Elsevier Science Ltd. All rights reserved.

A DNA fingerprinting procedure for ultra high-throughput genetic analysis of insects

Existing procedures for the generation of polymorphic DNA markers are not optimal for insect studies in which the organisms are often tiny and background molecular Information is often non-existent. We have used a new high throughput DNA marker generation protocol called randomly amplified DNA fingerprints (RAF) to analyse the genetic variability In three separate strains of the stored grain pest, Rhyzopertha dominica. This protocol is quick, robust and reliable even though it requires minimal sample preparation, minute amounts of DNA and no prior molecular analysis of the organism. Arbitrarily selected oligonucleotide primers routinely produced similar to 50 scoreable polymorphic DNA markers, between individuals of three Independent field isolates of R. dominica. Multivariate cluster analysis using forty-nine arbitrarily selected polymorphisms generated from a single primer reliably separated individuals into three clades corresponding to their geographical origin. The resulting clades were quite distinct, with an average genetic difference of 37.5 +/- 6.0% between clades and of 21.0 +/- 7.1% between individuals within clades. As a prelude to future gene mapping efforts, we have also assessed the performance of RAF under conditions commonly used in gene mapping. In this analysis, fingerprints from pooled DNA samples accurately and reproducibly reflected RAF profiles obtained from Individual DNA samples that had been combined to create the bulked samples.

Spontaneous-combustion propensity of New Zealand coals under adiabatic conditions

Pulverised New Zealand coal samples have been tested from an initial temperature of 40 degreesC and reacted adiabatisally in an oven with oxygen to provide a full temperature history of auto-oxidation up to the self-sustained process of combustion. This procedure produces a self-heating rate index, R-70, calculated as the ratio of the time taken to reach 70 degreesC (degreesC/h). The R-70 index is a measure of the coal's propensity to spontaneous combustion. R-70 values for New Zealand coals are much higher than any previously published results. They show a rank dependence, whereby subbituminous coals have the highest propensity to spontaneous combustion (14.91-17.23 degreesC/h). A lignite sample has an R-70 value of 7.76 degreesC/h, and high-volatile bituminous B coals have R-70 values of 0.31-2.23 degreesC/h. Samples stored for 2 years show the same rank trend. The nature of this trend is most likely a function of the internal surface area of the coal that governs the available sites for oxidation. Calculating the Suggate rank; for any New Zealand coal can be used to rare its propensity to spontaneous combustion. Resin bodies in the subbituminous coal show no propensity to spontaneous combustion. (C) 2001 Elsevier Science B.V. All rights reserved.

Development and evaluation of a species diagnostic polymerase chain reaction-restriction fragment-length polymorphism procedure for cryptic members of the Culex sitiens (Diptera : Culicidae) subgroup in Australia and the southwest Pacific

Members of the Culex sitiens subgroup are important vectors of arboviruses, including Japanese encephalitis virus, Murray Valley encephalitis virus and Ross River virus. Of the eight described species, Cx. annulirostris Skuse, Cx. sitiens Wiedemann, and Cx. palpalis Taylor appear to be the most abundant and widespread throughout northern Australia and Papua New Guinea (PNG). Recent investigations using allozymes have shown this subgroup to contain cryptic species that possess overlapping adult morphology. We report the development of a polymerase chain reaction-restriction fragment-length polymorphism (PCR-RFLP) procedure that reliably separates these three species. This procedure utilizes the sequence variation in the ribosomal DNA ITS1 and demonstrates species-specific PCR-RFLP profiles from both colony and field collected material. Assessment of the consistency of this procedure was undertaken on mosquitoes sampled from a wide geographic area including Australia, PNG, and the Solomon Islands. Overlapping adult morphology was observed for Cx. annulirostris and Cx. palpalis in both northern Queensland and PNG and for all three species at one site in northwest Queensland.

A convergent solution-phase synthesis of the macrocycle Ac-Phe-[Orn-Pro-D-Cha-Trp-Arg], a potent new antiinflammatory drug

Relatively few cyclic peptides have reached the pharmaceutical marketplace during the past decade, most produced through fermentation rather than made synthetically. Generally, this class of compounds is synthesized for research purposes on milligram scales by solid-phase methods, but if the potential of macrocyclic peptidomimetics is to be realized, low-cost larger scale solution-phase syntheses need to be devised and optimized to provide sufficient quantities for preclinical, clinical, and commercial uses. Here, we describe a cheap, medium-scale, solution-phase synthesis of the first reported highly potent, selective, and orally active antagonist of the human C5a receptor. This compound, Ac-Phe[Orn-Pro-D-Cha-Trp-Arg], known as 3D53, is a macrocyclic peptidomimetic of the human plasma protein C5a and displays excellent antiinflammatory activity in numerous animal models of human disease. In a convergent approach, two tripeptide fragments Ac-Phe-Orn-(Boc)-Pro-OH and H-D-Cha-Trp(For)-Arg-OEt were first prepared by high-yielding solution-phase couplings using a mixed anhydride method before coupling them to give a linear hexapeptide which, after deprotection, was obtained in 38% overall yield from the commercially available amino acids. Cyclization in solution using BOP reagent gave the antagonist in 33% yield (13% overall) after HPLC purification. Significant features of the synthesis were that the Arg side chain was left unprotected throughout, the component Boe-D-Cha-OH was obtained very efficiently via hydrogenation Of D-Phe with PtO2 in TFA/water, the tripeptides were coupled at the Pro-Cha junction to minimize racemization via the oxazolone pathway, and the entire synthesis was carried out without purification of any intermediates. The target cyclic product was purified (>97%) by reversed-phase HPLC. This convergent synthesis with minimal use of protecting groups allowed batches of 50100 g to be prepared efficiently in high yield using standard laboratory equipment. This type of procedure should be useful for making even larger quantities of this and other macrocyclic peptidomimetic drugs.

A new perspective on the integration responsiveness pressures confronting multinational firms

The Integration-Responsiveness framework of Prahalad and Doz (1987) has been used extensively in the international business literature to typify the diverse and often-conflicting environmental pressures confronting firms as they expand worldwide. Although the IR framework has been successfully applied for over a decade, many theoretical and empirical studies have focused on the consequences of these pressures rather than the pressures themselves. Prahalad and Doz identified the economic, technological, political, customer and competitive factors that create the global integration and local responsiveness pressures on the diverse businesses and functions in MNEs. This article explains the methodology, including the procedure for data collection and analysis. The researchers conclude with a discussion of their findings and directions for future research, speculating as to the appropriate definition of the domain of IR pressures and the criteria they might use to validate measures of these.