Starting out: Quality of working life of young workers in the retail and hospitality industries in Australia

In the 1990s workers in Australia were increasingly subjected to negative work pressures. Irregular work patterns, work intensification, and the transformation of the notion of career, often in the name of ‘flexibility’, were increasingly common. This period was also characterised by scant regard for the quality of working life of young people in entry-level employment, which is often portrayed as a transition stage prior to their admission into the full-time core workforce. This paper explores the experiences of twenty-two young people at the beginning of their careers, in the hospitality and retail industries, with reference to three quality of working life (QWL) elements: hours flexibility, work-life balance and career potential. Qualitative evidence reveals a variety of experiences but, on balance, suggests a negative quality of working life and limited commitment to their current industry. In conclusion, the paper suggests that these industries must pay more attention to QWL issues in order to attract and retain quality staff.

Manufacture of high pressure die-cast radio frequency filter bodies

The manufacture of a radio frequency filter box using high pressure die casting (HPDC) is compared to the traditional high speed machining route. This paper describes an industrial exercise that concluded HPDC to be an economical and appropriate method to produce larger volumes of thin-walled telecommunications components. Modifications to the component design were made to make the component suitable for the HPDC process. Development of the die design through simulation modelling is described. The wrought alloy was replaced by near-eutectic Al-Si die casting alloy that was found to give better temperature stability performance. Apart from the economic benefits, HPDC was found to give lower filter efficiency losses through better surface finish. The effects of HPDC process variables, such as intensification pressure and injection piston velocity, on component quality, particularly porosity levels, were investigated. The pressure was analysed in terms of HPDC machine set pressure and the pressure measured in the die cavity by pressure sensors. Porosity was found to decrease with increased pressure and slightly increase with higher casting velocities.

Farmers' strategies for managing acid upland soils in Southeast Asia: an evolutionary perspective

The acid soils of the uplands of Southeast Asia have resisted intensive agricultural use for centuries. In recent decades, however, due to rapid population growth, escalating market demand for agricultural produce, and govemment policies for land development and settlement, the acid uplands have become the focus of more intensive land-use systems, placing greater demands on farmers and requiring the development and dissemination of improved practices for soil management. In order to develop appropriate soil management technologies and plan effective interventions to facilitate their adoption, it is important to understand the goals and circumstances of farmers in the acid uplands, the range of farming systems they have developed, and the variety of socio-economic factors and trends influencing the evolution of these farming systems. Building on Boserup's model of agrarian change, an evolutionary framework is developed and applied to five case studies: a long-fallow (shifting) cultivation system in Sarawak, Malaysia; a short-fallow system in South Kalimantan, Indonesia; a continuous cropping system in Bukidnon, Philippines; a tree crop (with intercropping) system in Southern Thailand; a livestock grazing system in Daclac, Vietnam. The framework provides a useful tool to interpret and categorise farmers' evolving soil management strategies and to plan more effective soil management research and interventions. (c) 2004 Elsevier B.V. All rights reserved.

Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting Effect of the process parameters

A heat transfer coefficient gauge has been built, obeying particular rules in order to ensure the relevance and accuracy of the collected information. The gauge body is made out of the same materials as the die casting die (H13). It is equipped with six thermocouples located at different depths in the body and with a sapphire light pipe. The light pipe is linked to an optic fibre, which is connected to a monochromatic pyrometer. Thermocouples and pyrometer measurements are recorded with a data logger. A high pressure die casting die was instrumented with one such gauge. A set of 150 castings was done and the data recorded. During the casting, some process parameters have been modified such as piston velocity, intensification pressure, delay before switch to the intensification stage, temperature of the alloy, etc.... The data was treated with an inverse method in order to transform temperature measurements into heat flux density and heat transfer coefficient plots. The piston velocity and the initial temperature of the die seem to be the process parameters that have the greatest influence on the heat transfer. (c) 2005 Elsevier B.V. All rights reserved.

Endocrine-disrupting compounds: A review of their challenge to sustainable and safe water supply and water reuse

The relevance of endocrine-disrupting compounds as potential contaminants of drinking water is reviewed, particularly in the reuse of wastewater. Growing populations and increasing intensification of land and water use for industry and agriculture have increased the need to reclaim wastewater for reuse, including to supplement the drinking water supply. The variety of anthropogenic chemicals that have been identified as potential endocrine disruptors in the environment and the problems arising from their use as human and livestock pharmaceuticals, as agricultural chemicals and in industry are discussed. The potentially adverse impact of these chemicals on human health and the ecology of the natural environment are reviewed. Data for the removal of estrogenic compounds from wastewater treatment are presented, together with the comparative potencies of estrogenic compounds. The relative exposure to estrogens of women on oral contraceptives, hormone replacement therapy, and through food consumption is estimated. A brief overview of some methods available or under development for the assessment of estrogenic activity in environmental samples is provided. The review concludes with a discussion of the directions for further investigation, which include human epidemiology, methodology development, and wastewater monitoring. (C) 2006 Wiley Periodicals, Inc.

Planted forests and biodiversity

Expansion of planted forests and intensification of their management has raised concerns among forest managers and the public over the implications of these trends for sustainable production and conservation of forest biological diversity. We review the current state of knowledge on the impacts of plantation forestry on genetic and species diversity at different spatial scales and discuss the economic and ecological implications of biodiversity management within plantation stands and landscapes. Managing plantations to produce goods such as timber while also enhancing ecological services such as biodiversity involves tradeoffs, which can be made only with a clear understanding of the ecological context of plantations in the broader landscape and agreement among stakeholders on the desired balance of goods and ecological services from plantations.

Sweet potato in Oceania: a reappraisal

allard's introductory chapter reviews the lively debate concerning the introduction of sweet potato into Oceania and its role in debates concerning population growth, population density, and their relationship to agricultural intensification and socio- economic and political change, particularly in New Guinea. Other forms of proxy data include archaeological evidence for cropping and agricultural technology (Coil and Kirch); temporal data indicative of shifts in landscape use and changing agricultural practices (Bayliss-Smith et al.; Haberle and Atkin; Wallin et al.); and data from legends, ethnohistoric documents, and ethnographic studies providing evidence for the timing of the introduction, and the importance of the crop in various Oceanic societies (Allen; Dunis; Wallin et al.).

The influence of pressure during solidification of high pressure die cast aluminium telecommunications components

The effects of process variables on the quality of high-pressure die cast components was determined with the aid of in-cavity pressure sensors. In particular, the effects of set intensification pressure, delay time, and casting velocity have been investigated. The in-cavity pressure sensor has been used to determine how conditions within the die-cavity are related to the process parameters regulated by the die casting machine, and in turn the effect of variations in these parameters on the integrity of the final part. Porosity was found to decrease with increasing intensification pressure and increase with increasing casting velocity. The delay time before the application of the intensification pressure was not observed to have a significant effect on porosity levels. (c) 2006 Elsevier B.V. All rights reserved.