Method for determining reaction rate of mild steel containers during melting of magnesium-aluminium alloys and effect of aluminium content on directionally solidified microstructures

A magnesium alloy of eutectic composition (33 wt-'%Al) was directionally solidified in mild steel tubes at two growth rates, 32 and 580 mum s(-1,) in a temperature gradient between 10 and 20 K mm(-1). After directional solidification, the composition of each specimen varied dramatically, from 32'%Al in the region that had remained solid to 18%Al (32 mum s(-1) specimen) and 13%Al (580 mum s(-1) specimen) at the plane that had been quenched from the eutectic temperature. As the aluminium content decreased, the microstructure contained an increasing volume fraction of primary magnesium dendrites and the eutectic morphology gradually changed from lamellar to partially divorced. The reduction in aluminium content was caused by the growth of an Al-Fe phase ahead of the Mg-Al growth front. Most of the growth of the Al-Fe phase occurred during the remelting period before directional solidification. The thickness of the Al-Fe phase increased with increased temperature and time of contact with the molten Mg-Al alloy. (C) 2003 Maney Publishing.

Novel silica gel supported TiO2 photocatalyst synthesized by CVD method

TiO2 in anatase crystal phase is a very effective catalyst in the photocatalytic oxidation of organic compounds in water. To improve the recovery rate of TiO2 photocatalysts, which in most cases are in fine powder form, the chemical vapor deposition (CVD) method was used to load TiO2 onto a bigger particle support, silica gel. The amount of titania coating was found to depend strongly on the synthesis parameters of carrier gas flow rate and coating time. XPS and nitrogen ads/desorption results showed that most of the TiO2 particles generated from CVD were distributed on the external surface of the support and the coating was stable. The photocatalytic activities of TiO2/silica gel with different amounts of titania were evaluated for the oxidation of phenol aqueous solution and compared with that of Degussa P25. The optimum titania loading rate was found around 6 wt % of the TiO2 bulk concentration. Although the activity of the best TiO2/silica gel sample was still lower than that of P25, the synthesized TiO2/silica gel catalyst can be easily separated from the treated water and was found to maintain its TiO2 content and catalytic activity.

Searches and content of the OTseeker database: Informing research priorities

BACKGROUND. A strategic and prioritized approach to occupational therapy research is needed, particularly given the limited research funding available. Comparing occupational therapists' information needs with the research evidence available can potentially inform research debate within the profession. This study aimed to identify research topics most often sought by users of the OTseeker database and to compare these with the quantity of topics available in the database. METHOD. A random sample of keyword search terms submitted to OTseeker (n = 4,500) was coded according to diagnostic and intervention categories, and compared with the amount of research contained in OTseeker in 2004. RESULTS. Most frequently sought topics were relevant to the diagnostic categories of pediatric conditions (19%), neurology and neuromuscular disorders (17%), and mental health (17%). Most frequently sought intervention topics included modes of service delivery, sensory interventions, and physical modalities. Although many frequently sought topics had a correspondingly high volume of research in OTseeker, a few areas had very little content (e.g., fine motor skill acquisition, autistic spectrum disorder). This information is offered to inform discussions about research priorities and resource allocation for research within occupational therapy.

Estimating nutrient intake in comparative studies of animals: an example using dietary carotenoid content in birds

Many different methods of reporting animal diets have been used in ecological research. These vary greatly in level of accuracy and precision and therefore complicate attempts to measure and compare diets, and quantitites of nutrients in those diets, across a wide range of taxa. For most birds, the carotenoid content of the diet has not been directly measured. Here, therefore, I use an avian example to show how different methods of measuring the quantities of various foods in the diet affect the relative rankings of higher taxa (families, subfamilies, and tribes), and species within these taxa, with regard to the carotenoid contents of their diets. This is a timely example, as much recent avian literature has focused on the way dietary carotenoids may be traded off among aspects of survival, fitness and signalling. I assessed the mean dietary carotenoid contents of representatives of thirty higher taxa of birds using four different carotenoid intake indices varying in precision, including trophic levels, a coarse-scale and a fine-scale categorical index, and quantitative estimates of dietary carotenoids. This last method was used as the benchmark. For comparisons among taxa, all but the trophic level index were significantly correlated with each other. However, for comparisons of species within taxa, the fine-scale index outperformed the coarse-scale index, which in turn outperformed the trophic level index. In addition, each method has advantages and disadvantages, as well as underlying assumptions that must be considered. Examination and comparison of several possible methods of diet assessment appears to highlight these so that the best possible index is used given available data, and it is recommended that such a step be taken prior to the inclusion of estimated nutrient intake in any statistical analysis. Although applied to avian carotenoids here, this method could readily be applied to other taxa and types of nutrients.

Carotenoid content of pandanus fruit cultivars and other foods of the Republic of Kiribati

Background: Kiribati, a remote atoll island country of the Pacific, has serious problems of vitamin A deficiency (VAD). Thus, it is important to identify locally grown acceptable foods that might be promoted to alleviate this problem. Pandanus fruit (Pandanus tectorius) is a well-liked indigenous Kiribati food with many cultivars that have orange/yellow flesh, indicative of carotenoid content. Few have been previously analysed. Aim: This study was conducted to identify cultivars of pandanus and other foods that could be promoted to alleviate VAD in Kiribati. Method: Ethnography was used to select foods and assess acceptability factors. Pandanus and other foods were analysed for beta- and alpha-carotene, beta-cryptoxanthin, lutein, zeaxanthin, lycopene and total carotenoids using high-performance liquid chromatography. Results: Of the nine pandanus cultivars investigated there was a great range of provitamin A carotenoid levels (from 62 to 19 086 mu g beta-carotene/100 g), generally with higher levels in those more deeply coloured. Seven pandanus cultivars, one giant swamp taro (Cyrtosperma chamissonis) cultivar and native fig (Ficus tinctoria) had significant provitamin A carotenoid content, meeting all or half of estimated daily vitamin A requirements within normal consumption patterns. Analyses in different laboratories confirmed high carotenoid levels in pandanus but showed that there are still questions as to how high the levels might be, owing to variation arising from different handling/preparation/analytical techniques. Conclusions: These carotenoid-rich acceptable foods should be promoted for alleviating VAD in Kiribati and possibly other Pacific contexts where these foods are important. Further research in the Pacific is needed to identify additional indigenous foods with potential health benefits.

A survey of regular ecstasy users' knowledge and practices around determining pill content and purity: Implications for policy and practice.

Objective: To examine the methods used by a sample of regular ecstasy users to determine the content and purity of ecstasy pills, their knowledge of the limitations of available pill testing methods, and how pill test results would influence their drug use behaviour. Method: Data were collected from regular ecstasy users (n = 810) recruited from all eight capital cities of Australia. Data were analysed using multiple logistic regression and chi-square (chi(2)) tests of association. Open-ended responses were coded for themes. Results: The majority of the sample(84%) reported attempting to find out the content and purity of ecstasy at least some of the time, most commonly asking friends or dealers. Less than one quarter (22%) reported personal use of testing kits. There was a moderate level of awareness of the limitations of testing kits among those who reported having used them. Over half (57%) of those reporting personal use of testing kits reported that they would not take a pill if test results indicated that it contained ketamine and over three quarters (76%) reported that they would not take an "unknown" pill (producing no reaction in a reagent test). Finally, a considerable majority (63%) expressed interest in pill testing should it be more widely available. Conclusions: The majority of regular ecstasy users sampled in this Australian study report previous attempts to determine the content and purity of pills sold as ecstasy. Although only a small proportion have used testing kits, many report that they would do so if they were more widely available. The results of pill tests may influence drug use if they indicate that pills contain substances which ecstasy users do not want to ingest or are of unknown content. More detailed research examining ways in which pill testing may influence drug use is required to inform evidence-based policy. (c) 2006 Elsevier B.V. All rights reserved.

Towards more personalized web: Extraction and integration of dynamic content from the Web

Information and content integration are believed to be a possible solution to the problem of information overload in the Internet. The article is an overview of a simple solution for integration of information and content on the Web. Previous approaches to content extraction and integration are discussed, followed by introduction of a novel technology to deal with the problems, based on XML processing. The article includes lessons learned from solving issues of changing webpage layout, incompatibility with HTML standards and multiplicity of the results returned. The method adopting relative XPath queries over DOM tree proves to be more robust than previous approaches to Web information integration. Furthermore, the prototype implementation demonstrates the simplicity that enables non-professional users to easily adopt this approach in their day-to-day information management routines.

Making Fedora easier to implement with Fez: A free open source content model and workflow management front-end to Fedora

The University of Queensland, Australia has developed Fez, a world-leading user-interface and management system for Fedora-based institutional repositories, which bridges the gap between a repository and users. Christiaan Kortekaas, Andrew Bennett and Keith Webster will review this open source software that gives institutions the power to create a comprehensive repository solution without the hassle..

The Equilibrium Flux Method for the calculation of flows with non-equilbrium chemical reactions

The Equilibrium Flux Method [1] is a kinetic theory based finite volume method for calculating the flow of a compressible ideal gas. It is shown here that, in effect, the method solves the Euler equations with added pseudo-dissipative terms and that it is a natural upwinding scheme. The method can be easily modified so that the flow of a chemically reacting gas mixture can be calculated. Results from the method for a one-dimensional non-equilibrium reacting flow are shown to agree well with a conventional continuum solution. Results are also presented for the calculation of a plane two-dimensional flow, at hypersonic speed, of a dissociating gas around a blunt-nosed body.

Towards realistic simulations of lava dome growth using the level set method

The level set method has been implemented in a computational volcanology context. New techniques are presented to solve the advection equation and the reinitialisation equation. These techniques are based upon an algorithm developed in the finite difference context, but are modified to take advantage of the robustness of the finite element method. The resulting algorithm is tested on a well documented Rayleigh–Taylor instability benchmark [19], and on an axisymmetric problem where the analytical solution is known. Finally, the algorithm is applied to a basic study of lava dome growth.

A rapid single-step multiplex method for discriminating between Trichogramma (Hymenoptera: Trichogrammatidae) species in Australia

Inaccurate species identification confounds insect ecological studies. Examining aspects of Trichogramma ecology pertinent to the novel insect resistance management strategy for future transgenic cotton, Gossypium hirsutum L., production in the Ord River Irrigation Area (ORIA) of Western Australia required accurate differentiation between morphologically similar Trichogramma species. Established molecular diagnostic methods for Trichogramma identification use species-specific sequence difference in the internal transcribed spacer (ITS)-2 chromosomal region; yet, difficulties arise discerning polymerase chain reaction (PCR) fragments of similar base pair length by gel electrophoresis. This necessitates the restriction enzyme digestion of PCR-amplified ITS-2 fragments to readily differentiate Trichogramma australicum Girault and Trichogramma pretiosum Riley. To overcome the time and expense associated with a two-step diagnostic procedure, we developed a “one-step” multiplex PCR technique using species-specific primers designed to the ITS-2 region. This approach allowed for a high-throughput analysis of samples as part of ongoing ecological studies examining Trichogramma biological control potential in the ORIA where these two species occur in sympatry.

A method to lower the detection limit for optical beat signals from a frequency-dithered stabilized laser

A narrow absorption feature in an atomic or molecular gas (such as iodine or methane) is used as the frequency reference in many stabilized lasers. As part of the stabilization scheme an optical frequency dither is applied to the laser. In optical heterodyne experiments, this dither is transferred to the RF beat signal, reducing the spectral power density and hence the signal to noise ratio over that in the absence of dither. We removed the dither by mixing the raw beat signal with a dithered local oscillator signal. When the dither waveform is matched to that of the reference laser the output signal from the mixer is rendered dither free. Application of this method to a Winters iodine-stabilized helium-neon laser reduced the bandwidth of the beat signal from 6 MHz to 390 kHz, thereby lowering the detection threshold from 5 pW of laser power to 3 pW. In addition, a simple signal detection model is developed which predicts similar threshold reductions.

A first-principles density-functional calculation of the electronic and vibrational structure of the key melanin monomers

We report first-principles density-functional calculations for hydroquinone (HQ), indolequinone (IQ), and semiquinone (SQ). These molecules are believed to be the basic building blocks of the eumelanins, a class of biomacromolecules with important biological functions (including photoprotection) and with the potential for certain bioengineering applications. We have used the difference of self-consistent fields method to study the energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, HL. We show that HL is similar in IQ and SQ, but approximately twice as large in HQ. This may have important implications for our understanding of the observed broadband optical absorption of the eumelanins. The possibility of using this difference in HL to molecularly engineer the electronic properties of eumelanins is discussed. We calculate the infrared and Raman spectra of the three redox forms from first principles. Each of the molecules have significantly different infrared and Raman signatures, and so these spectra could be used in situ to nondestructively identify the monomeric content of macromolecules. It is hoped that this may be a helpful analytical tool in determining the structure of eumelanin macromolecules and hence in helping to determine the structure-property-function relationships that control the behavior of the eumelanins.

Is YouTube telling or selling you something? Tobacco content on the YouTube video sharing website

The effectiveness of overt tobacco advertising and sponsorship bans is well established. The industry has responded to these bans by implementing “buzz” or “viral” marketing techniques, such as nightclub and dance party promotions. This paper analyses possible tobacco industry content on the burgeoning consumer generated media website, YouTube. Tobacco control efforts need to embrace this new medium in order to counter pro-smoking messages and maximize media advocacy opportunities.