Identity and pathogenicity of Fusarium spp. Isolated from wheat fields in Queensland and northern New South Wales

To establish the identity of Fusarium species associated with head blight (FHB) and crown rot (CR) of wheat, samples were collected from wheat paddocks with different cropping history in southern Queensland and northern New South Wales during 2001. CR was more widespread but FHB was only evident in northern NSW and often occurred with CR in the same paddock. Twenty different Fusarium spp. were identified from monoconidial isolates originating from different plant parts by using morphology and species-specific PCR assays. Fusarium pseudograminearum constituted 48% of all isolates and was more frequently obtained from the crown, whereas Fusarium graminearum made up 28% of all isolates and came mostly from the head. All 17 Fusarium species tested caused FHB and all 10 tested caused CR in plant infection assays, with significant (P < 0.001) difference in aggressiveness among species and among isolates within species for both diseases. Overall, isolates from stubble and crown were more aggressive for CR, whereas isolates from the flag leaf node were more aggressive for FHB. Isolates that were highly aggressive in causing CR were those originating from paddocks with wheat following wheat, whereas those from fields with wheat following maize or sorghum were highly aggressive for FHB. Although 20% of isolates caused severe to highly severe FHB and CR, there was no significant (P < 0.32) correlation between aggressiveness for FHB and CR. Given the ability of F. graminearum to colonise crowns in the field and to cause severe CR in bioassays, it is unclear why this pathogen is not more widely distributed in Australia.

Functional-structural plant modelling using a combination of architectural analysis, L-systems and a canonical model of function

This paper presents a new method for producing a functional-structural plant model that simulates response to different growth conditions, yet does not require detailed knowledge of underlying physiology. The example used to present this method is the modelling of the mountain birch tree. This new functional-structural modelling approach is based on linking an L-system representation of the dynamic structure of the plant with a canonical mathematical model of plant function. Growth indicated by the canonical model is allocated to the structural model according to probabilistic growth rules, such as rules for the placement and length of new shoots, which were derived from an analysis of architectural data. The main advantage of the approach is that it is relatively simple compared to the prevalent process-based functional-structural plant models and does not require a detailed understanding of underlying physiological processes, yet it is able to capture important aspects of plant function and adaptability, unlike simple empirical models. This approach, combining canonical modelling, architectural analysis and L-systems, thus fills the important role of providing an intermediate level of abstraction between the two extremes of deeply mechanistic process-based modelling and purely empirical modelling. We also investigated the relative importance of various aspects of this integrated modelling approach by analysing the sensitivity of the standard birch model to a number of variations in its parameters, functions and algorithms. The results show that using light as the sole factor determining the structural location of new growth gives satisfactory results. Including the influence of additional regulating factors made little difference to global characteristics of the emergent architecture. Changing the form of the probability functions and using alternative methods for choosing the sites of new growth also had little effect. (c) 2004 Elsevier B.V. All rights reserved.

Manipulating avocado fruit ripening with 1-methylcyclopropene

Previous investigations with 1-methylcyclopropene (1-MCP) on avocado (Persea americana Mill.) fruit have focussed mainly on improving storage life by reducing the severity of disorders causing discolouration of the flesh. Development of 1-MCP and ethylene treatments, which also help control the time to reach the eating ripe stage, may confer additional practical benefits. In this context, the current study investigated the potential of 1-MCP to accurately manipulate ripening of non-stored 'Hass' avocado fruit by treatment before or after ethylene and at different times during ripening. To investigate this, 500 nL L-1 1-MCP was applied within 1 day after harvest, followed by ethylene 0-14 days after 1-MCP. In addition, fruit were treated with ethylene, then 1-MCP 0-8 days after ethylene. Treatment of fruit with 500 nL L-1 1-MCP for 18 h at 20 degreesC provided the maximum effect by increasing the days from harvest to ripe (DTR) from 8 (with no 1-MCP) to 20. Fruit treated with 500 nL L-1 1-MCP for 18 h at 20 degreesC remained insensitive to 100 muL L-1 ethylene applied between 0 and 14 days after 1-MCP for 24 h at 20 degreesC. Ripening of fruit exposed to 100 muL L-1 ethylene for 24 h at 20 degreesC could be delayed by up to 3.3 days by applying 500 nL L-1 1-MCP for 18 h at 20 degreesC up to 2 days after ethylene treatment. However, once the fruit started to soften (sprung) there was little effect of 1-MCP on DTR, compared with no 1-MCP. 1-MCP treatment was associated with increased severity of body rots (caused mainly by Colletotrichum spp.) and stem-end rots (caused mainly by Dothiorella spp.), which was likely due to the increased DTR in these treatments. Significant differences in disease severity were found between orchards (replications), with replicates with low disease severity being less affected by 1-MCP treatment. These results indicate that 1-MCP can delay ripening, but careful sourcing of fruit is required to reduce the risk of diseases in ripe fruit. There is some capacity to delay ripening using 1-MCP after ethylene. There is little potential to control ripening using ethylene after treatment with 500 nL L-1 1-1-MCP, but lower concentrations may be more effective. (C) 2004 Elsevier B.V. All rights reserved.

A CFTR chloride channel activator prevents HrpN(ea)-induced cell death in Arabidopsis thaliana suspension cells

Erwinia amylovora is a necrogenic bacterium that causes fire blight of the Maloideae subfamily of Roseacae, such as apple and pear. It provokes necrosis in aerial parts of susceptible host plants and the typical hypersensitive reaction in non-host plants. The secreted hatpin, HrpN(ea), is able by itself to induce an active cell death in non-host plants. Ion flux modulations were shown to be involved early in such processes but very few data are available on the plasma membrane ion channel activities responsible for the pathogen-induced ion fluxes. We show here that HrpNea induces cell death in non-host Arabidopsis thaliana suspension cells. We further show that two cystic fibrosis transmembrane conductance regulator modulators, glibenclamide and bromotetramisole, can regulate anion channel activities and HrpN(ea)-induced cell death. (c) 2005 Elsevier SAS. All rights reserved.

Genetic diversity of Australian Fusarium graminearum and F-pseudograminearum

Genotypic diversity in Fusarium pseudograminearum and F. graminearum from Australia and the relationship between diversity and pathogen aggressiveness for head blight and/or crown rot of wheat were examined. Amplified fragment length polymorphism (AFLP) analysis revealed a high level of genotypic diversity within each species. Sixty-three of the 149 AFLP loci were significantly different between the two species and 70 of 72 F. pseudograminearum and 56 of 59 F. graminearum isolates had distinct haplotypes. When head blight and crown rot severity data from a recently published work on isolates representing the entire range of aggressiveness were used, only the genotypic diversity of F. pseudograminearum was significantly associated with its aggressiveness for the two diseases. Cluster analyses clearly demonstrated the polyphyletic structures that exist in both pathogen populations. The spatial diversity within F. graminearum was high within a single field, while frequent gene flow (N-m similar to 14) and a low fixation index (G(st) = 0.03) were recorded among F. pseudograminearum isolates from the adjacent states of New South Wales and Queensland. The differences in population structure between the heterothallic F. pseudograminearum (teleomorph G. coronicola) and the homothallic F. graminearum (teleomorph G. zeae) were not as pronounced as expected given their contrasting mating systems. Neither species was panmictic or strictly clonal. This points to sexual recombination in F. pseudograminearum, suggesting that ascospores of G. coronicola may also play a role in its biology and epidemiology.

Applications of the cyclone stickiness test for characterization of stickiness in food powders

The cyclone stickiness test (CST) technique was applied to measure the stickiness temperature and relative humidity of whey, honey, and apple juice powders. A moisture sorption isotherm study was conducted to analyze the surface moisture content of whey powder. The glass transition temperatures of the sample powder were analyzed using differential scanning calorimetry (DSC). The stickiness results of these products were found within 20 degrees C above their surface glass transition temperatures, which is well within the normal temperature range for glass transition in general. The results obtained by the CST technique were found consistent with DSC values.

Applications of Thermal Mechanical Compression Tests in food powder analysis

A new Thermal Mechanical Compression Test (TMCT) was applied for glass-rubber transition and melting analyses of food powders and crystals. The TMCT technique measures the phase change of a material based on mechanical changes during the transition. Whey, honey, and apple juice powders were analyzed for their glass-rubber transition temperatures. Sucrose and glucose monohydrate crystals were analyzed for their melting temperatures. The results were compared to the values obtained by conventional DSC and TMA techniques. The new TMCT technique provided the results that were very close to the conventional techniques. This technique can be an alternative to analyze glass-rubber transition of food, pharmaceutical, and chemical dry products.