Virtual training environments to improve train driver's crisis decision making

This paper reports on a current research project in which virtual reality simulators are being investigated as a means of simulating hazardous Rail work conditions in order to allow train drivers to practice decision-making under stress. When working under high stress conditions train drivers need to move beyond procedural responses into a response activated through their own problem-solving and decision-making skills. This study focuses on the use of stress inoculation training which aims to build driver’s confidence in the use of new decision-making skills by being repeatedly required to respond to hazardous driving conditions. In particular, the study makes use of a train cab driving simulator to reproduce potentially stress inducing real-world scenarios. Initial pilot research has been undertaken in which drivers have experienced the training simulation and subsequently completed surveys on the level of immersion experienced. Concurrently drivers have also participated in a velocity perception experiment designed to objectively measure the fidelity of the virtual training environment. Baseline data, against which decision-making skills post training will be measured, is being gathered via cognitive task analysis designed to identify primary decision requirements for specific rail events. While considerable efforts have been invested in improving Virtual Reality technology, little is known about how to best use this technology for training personnel to respond to workplace conditions in the Rail Industry. To enable the best use of simulators for training in the Rail context the project aims to identify those factors within virtual reality that support required learning outcomes and use this information to design training simulations that reliably and safely train staff in required workplace accident response skills.

Relation between cell disruption conditions, cell debris particle size, and inclusion body release

The efficiency of physical separation of inclusion bodies from cell debris is related to cell debris size and inclusion body release and both factors should be taken into account when designing a process. In this work, cell disruption by enzymatic treatment with lysozyme and cellulase, by homogenization, and by homogenization with ammonia pretreatment is discussed. These disruption methods are compared on the basis of inclusion body release, operating costs, and cell debris particle size. The latter was measured with cumulative sedimentation analysis in combination with membrane-associated protein quantification by SDS-PAGE and a spectrophotometric pepticloglycan quantification method. Comparison of the results obtained with these two cell debris quantification methods shows that enzymatic treatment yields cell debris particles with varying chemical composition, while this is not the case with the other disruption methods that were investigated. Furthermore, the experiments show that ammonia pretreatment with homogenization increases inclusion body release compared to homogenization without pretreatment and that this pretreatment may be used to control the cell debris size to some extent. The enzymatic disruption process gives a higher product release than homogenization with or without ammonia pretreatment at lower operating costs, but it also yields a much smaller cell debris size than the other disruption process. This is unfavorable for centrifugal inclusion body purification in this case, where cell debris is the component going to the sediment and the inclusion body is the floating component. Nevertheless, calculations show that centrifugal separation of inclusion bodies from the enzymatically treated cells gives a high inclusion body yield and purity. (C) 2004 Wiley Periodicals, Inc.

Acetazolamide reduces exercise capacity and increases leg fatigue under hypoxic conditions

Acetazolamide (Acz) is used at altitude to prevent acute mountain sickness, but its effect on exercise capacity under hypoxic conditions is uncertain. Nine healthy men completed this double-blind, randomized, crossover study. All subjects underwent incremental exercise to exhaustion with an inspired O-2 fraction of 0.13, hypoxic ventilatory responses, and hypercapnic ventilatory responses after Acz (500 mg twice daily for 5 doses) and placebo. Maximum power of 203 +/- 38 (SD) Won Acz was less than the placebo value of 225 +/- 40 W (P < 0.01). At peak exercise, arterialized capillary pH was lower and PO2 higher on Acz (P < 0.01). Ventilation was 118.6 +/- 20.0 l/min at the maximal power on Acz and 102.4 +/- 20.7 l/min at the same power on placebo (P < 0.02), and Borg score for leg fatigue was increased on Acz (P < 0.02), with no difference in Borg score for dyspnea. Hypercapnic ventilatory response on Acz was greater (P < 0.02), whereas hypoxic ventilatory response was unchanged. During hypoxic exercise, Acz reduced exercise capacity associated with increased perception of leg fatigue. Despite increased ventilation, dyspnea was not increased.

Assessing cost-effectiveness in mental health: vocational rehabilitation for schizophrenia and related conditions

Objective: Existing evidence suggests that vocational rehabilitation services, in particular individual placement and support (IPS), are effective in assisting people with schizophrenia and related conditions gain open employment. Despite this, such services are not available to all unemployed people with schizophrenia who wish to work. Existing evidence suggests that while IPS confers no clinical advantages over routine care, it does improve the proportion of people returning to employment. The objective of the current study is to investigate the net benefit of introducing IPS services into current mental health services in Australia. Method: The net benefit of IPS is assessed from a health sector perspective using cost-benefit analysis. A two-stage approach is taken to the assessment of benefit. The first stage involves a quantitative analysis of the net benefit, defined as the benefits of IPS (comprising transfer payments averted, income tax accrued and individual income earned) minus the costs. The second stage involves application of 'second-filter' criteria (including equity, strength of evidence, feasibility and acceptability to stakeholders) to results. The robustness of results is tested using the multivariate probabilistic sensitivity analysis. Results: The costs of IPS are $A10.3M (95% uncertainty interval $A7.4M-$A13.6M), the benefits are $A4.7M ($A3.1M-$A6.5M), resulting in a negative net benefit of $A5.6M ($A8.4M-$A3.4M). Conclusions: The current analysis suggests that IPS costs are greater than the monetary benefits. However, the evidence-base of the current analysis is weak. Structural conditions surrounding welfare payments in Australia create disincentives to full-time employment for people with disabilities.

The impact of computer display height and desk design on 3D posture during information technology work by young adults

Computer display height and desk design to allow forearm support are two critical design features of workstations for information technology tasks. However there is currently no 3D description of head and neck posture with different computer display heights and no direct comparison to paper based information technology tasks. There is also inconsistent evidence on the effect of forearm support on posture and no evidence on whether these features interact. This study compared the 3D head, neck and upper limb postures of 18 male and 18 female young adults whilst working with different display and desk design conditions. There was no substantial interaction between display height and desk design. Lower display heights increased head and neck flexion with more spinal asymmetry when working with paper. The curved desk, designed to provide forearm support, increased scapula elevation/protraction and shoulder flexion/abduction.

Entropy generation for microscale forced convection: effects of different thermal boundary conditions, velocity slip, temperature jump, viscous dissipation, and duct geometry

This work presents closed form solutions for fully developed temperature distribution and entropy generation due to forced convection in microelectromechanical systems (MEMS) in the Slip-flow regime, for which the Knudsen number lies within the range 0.001

Evaluation of a pilot telemedicine network for accident and emergency work

A pilot accident and emergency. teleconsulting service was established in Scotland. It was based at the accident and emergency department of the main hospital in Aberdeen. There were three peripheral sites in rural Grampian (Peterhead, Turriff and Huntly) and one in the Shetland Isles. The videoconferencing equipment used was connected by ISDN at 384 kbit/s. During the 15 months of the study, 1998 videoconference calls were made, of which 402 (20%) calls were made to the accident and emergency department for clinical consultations. The majority of the clinical calls (95%) were made between 09:00 and 17:00, and more than 90% were completed within 20 min. During the majority of calls (87%) one or more X-ray images were transmitted. The majority of patients (89%) received treatment without transportation to the main centre in Aberdeen. The present study demonstrated that accident and emergency teleconsultations can be technically reliable, effective in reducing the number of patient transfers and acceptable to the referring clinicians. As a result, approximately pound1.5 million has been made available by the government to develop a national system for Scotland.