Undergraduate student experiences and perceptions of group projects

This paper reports the experiences and perceptions of student group projects of three cohorts of undergraduates: a 3rd year capstone course in professional communication (N = 54), a 3rd year elective in chemical engineering (N = 29), and a core 2nd-year course in chemical engineering (N = 74).

Undergraduate teaching of ideal and real fluid flows: The value of real-world experimental projects

This study describes the pedagogical impact of real-world experimental projects undertaken as part of an advanced undergraduate Fluid Mechanics subject at an Australian university. The projects have been organised to complement traditional lectures and introduce students to the challenges of professional design, physical modelling, data collection and analysis. The physical model studies combine experimental, analytical and numerical work in order to develop students’ abilities to tackle real-world problems. A first study illustrates the differences between ideal and real fluid flow force predictions based upon model tests of buildings in a large size wind tunnel used for research and professional testing. A second study introduces the complexity arising from unsteady non-uniform wave loading on a sheltered pile. The teaching initiative is supported by feedback from undergraduate students. The pedagogy of the course and projects is discussed with reference to experiential, project-based and collaborative learning. The practical work complements traditional lectures and tutorials, and provides opportunities which cannot be learnt in the classroom, real or virtual. Student feedback demonstrates a strong interest for the project phases of the course. This was associated with greater motivation for the course, leading in turn to lower failure rates. In terms of learning outcomes, the primary aim is to enable students to deliver a professional report as the final product, where physical model data are compared to ideal-fluid flow calculations and real-fluid flow analyses. Thus the students are exposed to a professional design approach involving a high level of expertise in fluid mechanics, with sufficient academic guidance to achieve carefully defined learning goals, while retaining sufficient flexibility for students to construct there own learning goals. The overall pedagogy is a blend of problem-based and project-based learning, which reflects academic research and professional practice. The assessment is a mix of peer-assessed oral presentations and written reports that aims to maximise student reflection and development. Student feedback indicated a strong motivation for courses that include a well-designed project component.

Undergraduate student experience in dental service delivery in rural South Australia: An analysis of costs and benefits

Background, Rural experience for dental students can provide valuable clinical education, change attitudes to rural practice, and make a valuable contribution to clinical service provision. The aim of this paper is to assess the costs and benefits of service delivery by students through rural training programmes Methods: Groups of two students worked in the public dental clinics in adjacent rural centres where there had been long-term difficulties in recruiting staff. The costs and benefits of the programme were assessed by the impact on waiting lists, the total cost per patient of, a course of care and by the marginal cost of adding service provision by students to existing arrangements. Results: The total costs of emergency and complete treatment provided by students were greater than the costs of treatment provided by public-sector dentists but less than the costs of private providers treating public patients. However, the value of services were greater when care was provided by students or private providers and the marginal cost of students providing services was 50-70 per cent of the cost of care provided by public dentists. Conclusion: This assessment suggests that the service benefits achieved compliment the primary objective of influencing the attitude of students to rural practice.

Impact of undergraduate and postgraduate rural training, and medical school entry criteria on rural practice among Australian general practitioners: national study of 2414 doctors

Objective To determine the association between rural undergraduate training, rural postgraduate training and medical school entry criteria favouring rural students, on likelihood of working in rural Australian general practice. Methods National case - control study of 2414 rural and urban general practitioners (GPs) sampled from the Health Insurance Commission database. Participants completed a questionnaire providing information on demographics, current practice location and rural undergraduate and postgraduate experience. Results Rural GPs were more likely to report having had any rural undergraduate training [ odds ratio ( OR) 1.61, 95% confidence interval (CI) 1.32 - 1.95] than were urban GPs. Rural GPs were much more likely to report having had rural postgraduate training ( OR 3.14, 95% CI 2.57 - 3.83). As the duration of rural postgraduate training increased so did the likelihood of working as a rural GP: those reporting that more than half their postgraduate training was rural were most likely to be rural GPs ( OR 10.52, 95% CI 5.39 - 20.51). South Australians whose final high school year was rural were more likely to be rural GPs ( OR 3.18, 95% CI 0.99 - 10.22). Conclusions Undergraduate rural training, postgraduate training and medical school entry criteria favouring rural students, all are associated with an increased likelihood of being a rural GP. Longer rural postgraduate training is more strongly associated with rural practice. These findings argue for continuation of rural undergraduate training opportunities and rural entry schemes, and an expansion in postgraduate training opportunities for GPs.

Evaluating curriculum changes in undergraduate cancer education

Background. Previous studies have indicated that Australian medical schools have not adequately prepared our graduating doctors to care for patients with cancer. The University of Western Australia (UWA) introduced a two-week clinical attachment in cancer medicine for fifth-year students in 2000 and a four-day clinical attachment in palliative care for sixth-year students in 2001. This article evaluates the introduction of these dedicated clinical attachments in cancer and palliative care. Method. The Australian Cancer Society's Cancer Education Survey was administered to the UWA graduates starting their intern year in teaching hospitals in Perth, Western Australia, in 2002. Their responses were compared with data collected in a similar national survey of Australian and New Zealand interns in 2001. Results. The response rate was 56% (n = 70). When compared with the national data for 2001, more UWA interns (2002) would refer a newly diagnosed breast cancer patient to a multidisciplinary breast clinic (97% vs. 74%, P<.001). Fewer UWA 2002 interns rated their training as poor or very poor in the management of patients with incurable cancer (19% vs. 35%, P=.008) and the management of symptoms in patients dying from cancer (10% vs. 37%, P<.001), but they were more likely to rate their training in assisting a patient to stop smoking as poor or very poor (54% vs. 21%, P<.001). Only a quarter of the UWA 2002 interns had examined a patient with a cancer of the mouth or tongue (25% vs. 49%, P<.001), and only two thirds had examined a patient with lymphoma (64% vs. 83%, P<.001). Conclusions. Our data reflect changes in the final two years of the medical course at UWA and suggest that the introduction of dedicated attachments in cancer and palliative care has better prepared graduating doctors to care for patients with cancer.

A model for the integration of legal research into Australian undergraduate law curricula

The marginalisation of the teaching and learning of legal research in the Australian law school curriculum is, in the author's experience, a condition common to many law schools. This is reflected in the reluctance of some law teachers to include legal research skills in the substantive law teaching schedule — often the result of unwillingness on the part of law school administrators to provide the resources necessary to ensure that such integration does not place a disproportionately heavy burden of assessment on those who are tempted. However, this may only be one of many reasons for the marginalisation of legal research in the law school experience. Rather than analyse the reasons for this marginalisation, this article deals with what needs to be done to rectify the situation, and to ensure that the teaching of legal research can be integrated into the law school curriculum in a meaningful way. This requires the use of teaching and learning theory which focuses on student-centred learning. This article outlines a model of legal research. It incorporates five transparent stages which are: analysis, contextualisation, bibliographic skills, interpretation and assessment and application.

The effect of pre-clinical fieldwork subject on the confidence and professional skills of undergraduate occupational therapy students

Objectives: This study investigated the effect of a pre-clinical fieldwork subject on the confidence and professional skills of undergraduate occupational therapy students during their first full-time clinical fieldwork placement. Methods: Participants were 31 third year students enrolled in the pre-clinical fieldwork subject (experimental group), and 25 students not enrolled in the subject (control group). Both quantitative and qualitative methodologies were employed to address the research question. Student anxiety levels were measured using the State-Trait Anxiety Inventory (STAI) and compared at three different intervals - prior to commencing the university semester, prior to commencing full-time practical placement, and following this full-time placement. Individual interviews were conducted with six students (three from the experimental group, three from the control group) to explore their perceptions regarding confidence levels and skill proficiencies during full-time placement. At each data analysis interval, responses for both groups were compared using independent samples t-tests. Responses were compared over time using analysis of variance (ANOVA). The qualitative data were subjected to thematic and content analysis. Results and Conclusions: In general, student anxiety levels did not differ between the experimental and control groups over time. However, qualitative results suggest that students who were enrolled in the pre-clinical subject have greater confidence and competence with occupational therapy skills, and have heightened awareness of the expectations on full-time placement.

Undergraduate performance in accounting and business-based information technology

The pervasiveness of information systems (IS) in organizations mandates the need for high levels of IS skills. In recognition, professional bodies impose IS course requirements for accreditation. For both students and employers, performance in IS courses has become important. The tertiary entrance overall performance score accounted for 19.7 per cent of the variance in students' passing grades. Thereafter, proficiency in office automation software and programming accounted for 1.5 and 0.8 per cent of the variance, respectively. Students living in a stable, family home-based environment performed better and it is likely that this environment underpinned other factors affecting performance.

Improving learning in undergraduate control engineering courses using context-based learning models

Control Engineering is an essential part of university electrical engineering education. Normally, a control course requires considerable mathematical as well as engineering knowledge and is consequently regarded as a difficult course by many undergraduate students. From the academic point of view, how to help the students to improve their learning of the control engineering knowledge is therefore an important task which requires careful planning and innovative teaching methods. Traditionally, the didactic teaching approach has been used to teach the students the concepts needed to solve control problems. This approach is commonly adopted in many mathematics intensive courses; however it generally lacks reflection from the students to improve their learning. This paper addresses the practice of action learning and context-based learning models in teaching university control courses. This context-based approach has been practised in teaching several control engineering courses in a university with promising results, particularly in view of student learning performances.