Experiments and modelling of phenanthrene biodegradation in the aqueous phase by a mixed culture

Pollution by polycyclic aromatic hydrocarbons(PAHs) is widespread due to unsuitable disposal of industrial waste. They are mostly defined as priority pollutants by environmental protection authorities worldwide. Phenanthrene, a typical PAH, was selected as the target in this paper. The PAH-degrading mixed culture, named ZM, was collected from a petroleum contaminated river bed. This culture was injected into phenanthrene solutions at different concentrations to quantify the biodegradation process. Results show near-complete removal of phenanthrene in three days of biodegradation if the initial phenanthrene concentration is low. When the initial concentration is high, the removal rate is increased but 20%-40% of the phenanthrene remains at the end of the experiment. The biomass shows a peak on the third day due to the combined effects of microbial growth and decay. Another peak is evident for cases with a high initial concentration, possibly due to production of an intermediate metabolite. The pH generally decreased during biodegradation because of the production of organic acid. Two phenomenological models were designed to simulate the phenanthrene biodegradation and biomass growth. A relatively simple model that does not consider the intermediate metabolite and its inhibition of phenanthrene biodegradation cannot fit the observed data. A modified Monod model that considered an intermediate metabolite (organic acid) and its inhibiting reversal effect reasonably depicts the experimental results.

Rhizopus arrhizus - a producer for simultaneous saccharification and fermentation of starch waste materials to L(+)-lactic acid

Rhizopus arrhizus, strain DAR 36017, produced L(+)-lactic acid in a simultaneous saccharification and fermentation process using starch waste effluents. Lactic acid at 19.5 - 44.3 g l(-1) with a yield of 0.85 - 0.96 g g(-1) was produced in 40 h using 20 - 60 g starch l(-1). Supplementation of nitrogen source may be unnecessary if potato or corn starch waste effluent was used as a production medium.

Bubble load measurement in the pulp zone of industrial flotation machines - a new device for determining the froth recovery of attached particles

A new device has been developed to directly measure the bubble loading of particle-bubble aggregates in industrial flotation machines, both mechanical flotation cells as well as flotation column cells. The bubble loading of aggregates allows for in-depth analysis of the operating performance of a flotation machine in terms of both pulp/collection zone and froth zone performance. This paper presents the methodology along with an example showing the excellent reproducibility of the device and an analysis of different operating conditions of the device itself. (C) 2004 Elsevier B.V All rights reserved.

Sanguinicola maritimus n. sp (Digenea : Sanguinicolidae) from Labridae (Teleostei : Perciformes) of southern Australian waters

A new species of Sanguinicola Plehn, 1905 is described from the marine teleosts Notolabrus parilus (Richardson) and N. tetricus (Richardson) (Perciformes: Labridae) from Western Australian and Tasmanian waters. This host distribution is strikingly anomalous; however, the present material fulfils the morphological criteria of Sanguinicola. S. maritimus n. sp. differs from previously described species in having the combination of a body 1,432-1,701 mu m long, the oesophagus 18.3-21.7% of the body length, the testis occupying 42.8-52.3% of the body length, an oviducal seminal receptacle and Mehlis' gland present, ovoid eggs, and vitelline follicles that extend anteriorly past the nerve commissure, laterally past the lateral nerve chords and posteriorly to the anterior margin of the cirrus-sac. S. maritimus also lacks a protrusible anterior proboscis. It also differs in the combination of host and geographical location, being the first Sanguinicola species from a marine teleost and the first from Australian waters.