The Australian Universities Teaching Committee project in 'Learning Outcomes and Curriculum Development in Psychology'

The Australian Universities Teaching Committee (AUTC) funds projects intended to improve the quality of teaching and learning in specific disciplinary areas. The project brief for 'Learning Outcomes and Curriculum Development in Psychology' for 2004/2005 was to 'produce an evaluative overview of courses ... with a focus on the specification and assessment of learning outcomes and ... identify strategic directions for universities to enhance teaching and learning'. This project was awarded to a consortium from The University of Queensland, University of Tasmania, and Southern Cross University. The starting point for this project is an analysis of the scientist-practitioner model and its role in curriculum design, a review of current challenges at a conceptual level, and consideration of the implications of recent changes to universities relating to such things as intemationalisation of programs and technological advances. The project will seek to bring together stakeholders from around the country in order to survey the widest possible range of perspectives on the project brief requirements. It is hoped also to establish mechanisms for fiiture scholarly discussion of these issues, including the establishment of an Australian Society for the Teaching of Psychology and an annual conference.

The Anatomy of an International Cartel: Cyanide 1897-1927

The development of a new product or a new process, if adopted by the market, may generate a number of economic processes including secondary innovations to promote the exploitation of the new discovery. Such technological advances may also promote new industrial ventures which may exist over many decades, enhancing economic development. The history of the adoption of the cyanide process for the extraction of gold from its ores exemplifies such developments. One outcome was the formation of an international cyanide cartel.

Adapting immunity with subunit vaccines: case studies with group A Streptococcus and malaria

Although vaccines have widely been regarded as the most cost-effective way to improve public health, for some organisms new technological advances in vaccine design and delivery, incurring additional developmental costs, will be essential. These organisms are typically those for which natural immunity is either slow to develop or does not develop at all. Clearly, such organisms have evolved strategies to evade immune responses and innovative approaches will be required to induce a type of immune response which is both different to that which develops naturally and is effective. This article describes some approaches to develop vaccines for two such organisms (malaria parasites and Streptococcus pyogenes (group A Streptococcus)) that are associated with widespread mortality and morbidity, mostly in the poorest countries of the world. At this stage, the challenges are primarily scientific, but if these hurdles are surmounted then the challenges will become financial ones - developing much needed vaccines for people least able to afford them. (C) 2002 Australian Society for Parasitology Inc. Published by Elsevier Science Ltd. All rights reserved.

Factors affecting student attitudes toward flexible online learning in management education

In response to recent technological advances and the trend toward flexible learning in education, the authors examined the factors affecting student satisfaction with flexible online learning. The authors identified 2 key student attributes of student satisfaction: (a) positive perceptions of technology in terms of ease of access and use of online flexible learning material and (b) autonomous and innovative learning styles. The authors derived measures of perceptions of technology from research on the Technology Acceptance Model and used locus of control and innovative attitude as indicators of an autonomous and innovative learning mode. First-year students undertaking an introductory management course completed surveys at the beginning (n = 248) and at the end (n = 256) of course work. The authors analyzed the data by using structural equation modeling. Results suggest that student satisfaction is influenced by positive perceptions toward technology and an autonomous learning mode.

Rapport-building through call in teaching Chinese as a foreign language: An exploratory study

Technological advances have brought about the ever-increasing utilisation of computer-assisted language learning ( CALL) media in the learning of a second language (L2). Computer-mediated communication, for example, provides a practical means for extending the learning of spoken language, a challenging process in tonal languages such as Chinese, beyond the realms of the classroom. In order to effectively improve spoken language competency, however, CALL applications must also reproduce the social interaction that lies at the heart of language learning and language use. This study draws on data obtained from the utilisation of CALL in the learning of L2 Chinese to explore whether this medium can be used to extend opportunities for rapport-building in language teaching beyond the face-to-face interaction of the classroom. Rapport's importance lies in its potential to enhance learning, motivate learners, and reduce learner anxiety. To date, CALL's potential in relation to this facet of social interaction remains a neglected area of research. The results of this exploratory study suggest that CALL may help foster learner-teacher rapport and that scaffolding, such as strategically composing rapport-fostering questions in sound-files, is conducive to this outcome. The study provides an instruction model for this application of CALL.

Applications of transcranial Doppler in the ICU: a review

Objective: Transcranial Doppler (TCD) ultrasonography is a technique that uses a hand-held Doppler transducer (placed on the surface of the cranial skin) to measure the velocity and pulsatility of blood flow within the intracranial and the extracranial arteries. This review critically evaluates the evidence for the use of TCD in the critical care population. Discussion: TCD has been frequently employed for the clinical evaluation of cerebral vasospasm following subarachnoid haemorrhage (SAH). To a lesser degree, TCD has also been used to evaluate cerebral autoregulatory capacity, monitor cerebral circulation during cardiopulmonary bypass and carotid endarterectomies and to diagnose brain death. Technological advances such as M mode, colour Doppler and three-dimensional power Doppler ultrasonography have extended the scope of TCD to include other non-critical care applications including assessment of cerebral emboli, functional TCD and the management of sickle cell disease. Conclusions: Despite publications suggesting concordance between TCD velocity measurements and cerebral blood flow there are few randomized controlled studies demonstrating an improved outcome with the use of TCD monitoring in neurocritical care. Newer developments in this technology include venous Doppler, functional Doppler and use of ultrasound contrast agents.

Incremental cost-effectiveness of exercise echocardiography vs. SPECT imaging for the evaluation of stable chest pain

Aims Technological advances in cardiac imaging have led to dramatic increases in test utilization and consumption of a growing proportion of cardiovascular healthcare costs. The opportunity costs of strategies favouring exercise echocardiography or SPECT imaging have been incompletely evaluated. Methods and results We examined prognosis and cost-effectiveness of exercise echocardiography (n=4884) vs. SPECT (n=4637) imaging in stable, intermediate risk, chest pain patients. Ischaemia extent was defined as the number of vascular territories with echocardiographic wall motion or SPECT perfusion abnormalities. Cox proportional hazard models were employed to assess time to cardiac death or myocardial infarction (MI). Total cardiovascular costs were summed (discounted and inflation-corrected) throughout follow-up. A cost-effectiveness ratio = 2% annual event risk), SPECT ischaemia was associated with earlier and greater utilization of coronary revascularization (P < 0.0001) resulting in an incremental cost-effectiveness ratio of $32 381/LYS. Conclusion Health care policies aimed at allocating limited resources can be effectively guided by applying clinical and economic outcomes evidence. A strategy aimed at cost-effective testing would support using echocardiography in low-risk patients with suspected coronary disease, whereas those higher risk patients benefit from referral to SPECT imaging.

What does the community think about lifespan extension technologies? The need for an empirical base for ethical and policy debates

Objectives: This paper examines public understandings of possibilities for increasing life expectancy, interest in taking up lifespan-extending interventions, and motivations influencing these intentions. Methods: Structured interviews were conducted with 31 adults, aged 50 and over. Results: Participants believed that technological advances would increase life expectancy but questioned the value of quantity over quality of life. Life in itself was not considered valuable without the ability to put it to good use. Participants would not use technologies to extend their own lifespan unless the result would also enhance their health. Conclusions: These findings may not be generalisable to the general public but they provide the first empirical evidence on the plausibility of common assumptions about public interest in 'anti-ageing' interventions. Surveys of the views of representative samples of the population are needed to inform the development of a research agenda on the ethical, legal and social implications of lifespan extension.

Control of vector-borne disease by genetic manipulation of insect populations: technological requirements and research priorities

The possibility of controlling vector-borne disease through the development and release of transgenic insect vectors has recently gained popular support and is being actively pursued by a number of research laboratories around the world. Several technical problems must be solved before such a strategy could be implemented: genes encoding refractory traits (traits that render the insect unable to transmit the pathogen) must be identified, a transformation system for important vector species has to be developed, and a strategy to spread the refractory trait into natural vector populations must be designed. Recent advances in this field of research make it seem likely that this technology will be available in the near future. In this paper we review recent progress in this area as well as argue that care should be taken in selecting the most appropriate disease system with which to first attempt this form of intervention. Much attention is currently being given to the application of this technology to the control of malaria, transmitted by Anopheles gambiae in Africa. While malaria is undoubtedly the most important vector-borne disease in the world and its control should remain an important goal, we maintain that the complex epidemiology of malaria together with the intense transmission rates in Africa may make it unsuitable for the first application of this technology. Diseases such as African trypanosomiasis, transmitted by the tsetse fly, or unstable malaria in India may provide more appropriate initial targets to evaluate the potential of this form of intervention.

Recent advances in the preparation and utilization of carbon nanotubes for hydrogen storage

Recent progress in the production, purification, and experimental and theoretical investigations of carbon nanotubes for hydrogen storage are reviewed. From the industrial point of view, the chemical vapor deposition process has shown advantages over laser ablation and electric-arc-discharge methods. The ultimate goal in nanotube synthesis should be to gain control over geometrical aspects of nanotubes, such as location and orientation, and the atomic structure of nanotubes, including helicity and diameter. There is currently no effective and simple purification procedure that fulfills all requirements for processing carbon nanotubes. Purification is still the bottleneck for technical applications, especially where large amounts of material are required. Although the alkali-metal-doped carbon nanotubes showed high H-2 Weight uptake, further investigations indicated that some of this uptake was due to water rather than hydrogen. This discovery indicates a potential source of error in evaluation of the storage capacity of doped carbon nanotubes. Nevertheless, currently available single-wall nanotubes yield a hydrogen uptake value near 4 wt% under moderate pressure and room temperature. A further 50% increase is needed to meet U.S. Department of Energy targets for commercial exploitation. Meeting this target will require combining experimental and theoretical efforts to achieve a full understanding of the adsorption process, so that the uptake can be rationally optimized to commercially attractive levels. Large-scale production and purification of carbon nanotubes and remarkable improvement of H-2 storage capacity in carbon nanotubes represent significant technological and theoretical challenges in the years to come.

Special issue on advances in data mining and its applications

Data mining is the process to identify valid, implicit, previously unknown, potentially useful and understandable information from large databases. It is an important step in the process of knowledge discovery in databases, (Olaru & Wehenkel, 1999). In a data mining process, input data can be structured, seme-structured, or unstructured. Data can be in text, categorical or numerical values. One of the important characteristics of data mining is its ability to deal data with large volume, distributed, time variant, noisy, and high dimensionality. A large number of data mining algorithms have been developed for different applications. For example, association rules mining can be useful for market basket problems, clustering algorithms can be used to discover trends in unsupervised learning problems, classification algorithms can be applied in decision-making problems, and sequential and time series mining algorithms can be used in predicting events, fault detection, and other supervised learning problems (Vapnik, 1999). Classification is among the most important tasks in the data mining, particularly for data mining applications into engineering fields. Together with regression, classification is mainly for predictive modelling. So far, there have been a number of classification algorithms in practice. According to (Sebastiani, 2002), the main classification algorithms can be categorized as: decision tree and rule based approach such as C4.5 (Quinlan, 1996); probability methods such as Bayesian classifier (Lewis, 1998); on-line methods such as Winnow (Littlestone, 1988) and CVFDT (Hulten 2001), neural networks methods (Rumelhart, Hinton & Wiliams, 1986); example-based methods such as k-nearest neighbors (Duda & Hart, 1973), and SVM (Cortes & Vapnik, 1995). Other important techniques for classification tasks include Associative Classification (Liu et al, 1998) and Ensemble Classification (Tumer, 1996).

A technological and organisational explanation for the size distribution of firms

This paper combines insights from the literature on the economics of organisation with traditional models of market structure to construct a theory of equilibrium firm size heterogeneity under the assumption of a homogenous product industry. It is possible that configurations consisting entirely of small firms (run by entrepreneurs with limited attention) and with larger firms (using managerial techniques to substitute away these limits to allow increasing returns technologies to become profitable) can arise in equilibrium. However, there also exist equilibrium configurations with the co-existence of large and small firms. The efficiency properties of these respective equilibria are discussed. Finally, the implications of an expanding market size are considered.