A step in the right direction

Selection of papers from conference entitled A step in the right direction, University of Queensland, 16 November 2002. Papers relate to work placements of Behavioural Studies students.

Large-eddy simulation of heat transfer downstream of a backward-facing step

Large-eddy simulation is used to predict heat transfer in the separated and reattached flow regions downstream of a backward-facing step. Simulations were carried out at a Reynolds number of 28 000 (based on the step height and the upstream centreline velocity) with a channel expansion ratio of 1.25. The Prandtl number was 0.71. Two subgrid-scale models were tested, namely the dynamic eddy-viscosity, eddy-diffusivity model and the dynamic mixed model. Both models showed good overall agreement with available experimental data. The simulations indicated that the peak in heat-transfer coefficient occurs slightly upstream of the mean reattachment location, in agreement with experimental data. The results of these simulations have been analysed to discover the mechanisms that cause this phenomenon. The peak in heat-transfer coefficient shows a direct correlation with the peak in wall shear-stress fluctuations. It is conjectured that the peak in these fluctuations is caused by an impingement mechanism, in which large eddies, originating in the shear layer, impact the wall just upstream of the mean reattachment location. These eddies cause a 'downwash', which increases the local heat-transfer coefficient by bringing cold fluid from above the shear layer towards the wall.

A Two-Step Sol–Gel Method for Synthesis of Nanoporous TiO2

This article reports a study of the effects of synthesis parameters on the preparation and formation of mesoporous titania nanopowders by employing a two-step sol-gel method. These materials displayed crystalline domains characteristic of anatase. The first step of the process involved the hydrolysis of titanium isopropoxide in a basic aqueous solution mediated by neutral surfactant. The solid product obtained from step 1 was then treated in an acidified ethanol solution containing the same titanium precursor to thicken the pore walls. Low pH and higher loading of the Ti precursor in step 2 produced better mesoporosity and crystallinity of titanium dioxide polymorphs. The resultant powder exhibited a high surface area (73.8 m(2)/g) and large pore volume (0.17 cm(3)/g) with uniform mesopores. These materials are envisaged to be used as precursors for mesoporous titania films as a wide band gap semiconductor in dye-sensitized nanocrystalline TiO2 solar cells.

Inhibitors of cholesteryl ester transfer protein - a step forward in the treatment of coronary artery disease?

Although the LDL cholesterol-lowering statins have reduced the mortality and morbidity associated with coronary artery disease (CAD), considerable mortality and morbidity remains. Increasing HDL cholesterol levels is associated with reduced CAD mortality and morbidity. In healthy subjects with mild dyslipidemia, treatment with JTT-705 decreased cholesteryl ester transfer protein (CETP) activity, increased HDL cholesterol and decreased LDL cholesterol. Similarly, another CETP inhibitor, torcetrapib, has recently been shown to increase HDL cholesterol by 46%, decrease LDL cholesterol by 8% and have no effect on triglycerides in subjects with HDL cholesterol levels below 1.0 mmol/l. Increasing HDL cholesterol with inhibitors of CETP represents a new approach to dyslipidemia that requires further investigation, especially in patients with CAD.

"One-Step" alkynylation of adamantyl iodide with Silver(I) acetylides

Silver(I) acetylides allow one-step alkynylation of adamantyl iodide in yields ranging from 25 to 68%.

A planar microwave imaging system with step-frequency synthesized pulse using different calibration methods

An experimental study of a planar microwave imaging system with step-frequency synthesized pulse for possible use in medical applications is described. Simple phantoms, consisting of a cylindrical plastic container with air or oil imitating fatty tissues and small highly reflective objects emulating tumors, are scanned with a probe antenna over a planar surface in the X-band. Different calibration schemes are considered for successful detection of these objects. (c) 2006 Wiley Periodicals, Inc.

Submerged and unsubmerged natural hydraulic jumps in a bedrock step-pool mountain channel (Fig. 1 Classical hydraulic jump with partially developed inflow conditions)

Fig. 1. Classical hydraulic jump with partially developed inflow conditions. F1 = 13.6, V1 = 4.7 m/s, B = 0.25 m, h = 0.020 mm, d1 = 0.012 mm, Q = 14 L/s. Photo courtesy of Dr. Hubert Chanson. published in: Geomorphology Volume 82, Issues 1-2, 6 December 2006, Pages 146-159 The Hydrology and Geomorphology of Bedrock Rivers doi:10.1016/j.geomorph.2005.09.024 Submerged and unsubmerged natural hydraulic jumps in a bedrock step-pool mountain channel Brett L. Vallé and Gregory B. Pasternacka